Study of Thickness Distribution in the Warm Forming of Aluminium Alloy : Using Finite Element Simulation

P. M. S. Hallika

ISBN 10: 6206740498 / ISBN 13: 9786206740490

Published by LAP LAMBERT Academic Publishing

About this Item

nach der Bestellung gedruckt Neuware - Printed after ordering - Aluminum although very ductile, but it is having very poor formability which restricts its use in most of the industrial applications which require forming e.g. automobile engineering. In recent years there is an effort to increase the temperature of the material before and during forming. Generally, in any operation large amount of time is consumed in trial and error method and there are high chances that the tools are to be redesigned whenever the desired products are not obtained. So, this trial and error method involves lot of experience and loss of valuable time. To overcome this problem, process modeling by computer simulation called Finite Element Method (FEM) has been introduced which stimulates the actual process and thus saves time and money. The FEM model is constructed in LS-DYNA and after simulating the process results are compared with the experimental ones.

Seller Inventory # 9786206740490

Bibliographic Details

• Title: Study of Thickness Distribution in the Warm Forming of Aluminium Alloy : Using Finite Element Simulation
• Publisher: LAP LAMBERT Academic Publishing
• Language: English
• ISBN 10: 6206740498
• ISBN 13: 9786206740490
• Binding: Taschenbuch
• Condition: Neu
• Dimensions: 220W x 150H x 4D millimeters 220 millimeters width by 150 millimeters height by 4 millimeters depth
• Weight: 107 grams

About this title

Synopsis

Aluminum although very ductile, but it is having very poor formability which restricts its use in most of the industrial applications which require forming e.g. automobile engineering. In recent years there is an effort to increase the temperature of the material before and during forming. Generally, in any operation large amount of time is consumed in trial and error method and there are high chances that the tools are to be redesigned whenever the desired products are not obtained. So, this trial and error method involves lot of experience and loss of valuable time. To overcome this problem, process modeling by computer simulation called Finite Element Method (FEM) has been introduced which stimulates the actual process and thus saves time and money. The FEM model is constructed in LS-DYNA and after simulating the process results are compared with the experimental ones.