Teach Multiplication, Division, and the Time Table All at the Same Time : An Instructional Guide for Learning Basic Math Skills
Language: English
Published by Authorhouse, 2011
- Softcover
- New
Seller: AHA-BUCH GmbH, Einbeck, GermanyAHA-BUCH GmbH
AbeBooks seller since August 14, 2006
Condition: New
US$ 27.45
Quantity: 2 available
Add to basketItem description from seller
nach der Bestellung gedruckt Neuware - Printed after ordering - The purpose of this book is to help students develop basic math skills that serve as the building blocks for all mathematical equations, and problems solving concepts. If basic math skills are learned, adding new formulas and problem solving concepts simply become a matter of understanding when and what sequence to apply for each order of operation. If students do not learn the basic foundation of mathematics; addition, subtraction, multiplication, division, and the time table chart, math will always be a subject that students experience difficulty understanding and comprehending. This book is intended to be a simple guide to help third grade students learn and become proficient in their application of basic math skills. Students will learn to use addition, subtraction, multiplication, division and the time table chart simultaneously while they learn the strategy of counting up. 'I have nothing against the usage of calculators, but when students are introduced to the calculator at the third grade level, they become dependent on the use of calculators for assistance with math computations. Once students learn to use the calculator it becomes unnecessary for them to master basic math skills, because they continue to rely on the use of calculators for assistance with math. The calculator becomes the math problem solving tool. Could this be part of the reason students are not performing at levels of proficiency required on standardized test ' It is important for students to learn basic math skills in its entirety, prior to being introduced to the calculator. Once students have developed a basic foundation of math skills then and only then should the calculator be introduced as a learning tool. When students learn the strategy of 'Counting Up' they will be able to rely on what they have learned to find the solutions to math problems.…
Seller Inventory # 9781456727703
- Title
- Teach Multiplication, Division, and the Time Table All at the Same Time : An Instructional Guide for Learning Basic Math Skills
- Author
- Andray McCuien
- Publisher
- Authorhouse
- Publication year
- 2011
- Condition
- Neu
- Binding
- Taschenbuch
- Language
- English
- ISBN 10
- 1456727702
- ISBN 13
- 9781456727703
- Item weight
- 240 grams
- Dimensions
- 280x210x5 mm
The purpose of this book is to help students develop basic math skills that serve as the building blocks for all mathematical equations, and problems solving concepts. If basic math skills are learned, adding new formulas and problem solving concepts simply become a matter of understanding when and what sequence to apply for each order of operation. If students do not learn the basic foundation of mathematics; addition, subtraction, multiplication, division, and the time table chart, math will always be a subject that students experience difficulty understanding and comprehending.
This book is intended to be a simple guide to help third grade students learn and become proficient in their application of basic math skills. Students will learn to use addition, subtraction, multiplication, division and the time table chart simultaneously while they learn the strategy of counting up.
"I have nothing against the usage of calculators, but when students are introduced to the calculator at the third grade level, they become dependent on the use of calculators for assistance with math computations. Once students learn to use the calculator it becomes unnecessary for them to master basic math skills, because they continue to rely on the use of calculators for assistance with math. The calculator becomes the math problem solving tool. Could this be part of the reason students are not performing at levels of proficiency required on standardized test?" It is important for students to learn basic math skills in its entirety, prior to being introduced to the calculator. Once students have developed a basic foundation of math skills then and only then should the calculator be introduced as a learning tool.
When students learn the strategy of "Counting Up" they will be able to rely on what they have learned to find the solutions to math problems.
"Synopsis" may belong to another edition of this title.
Excerpt. © Reprinted by permission. All rights reserved.
Teach Multiplication, Division, and the Time Table All at the Same Time
An Instructional Guide for Learning Basic Math SkillsBy Andray McCuienAuthorHouse
Copyright © 2011 Andray McCuienAll right reserved.
ISBN: 978-1-4567-2770-3
Contents
Title Page.....................................................1Content........................................................3Preface........................................................4How Students Learn.............................................5Reader Notes...................................................61 Multiplication and the Time Table............................112 Skip Counting................................................133 Introducing Long Division....................................154 Inverse Operation............................................295 Division Problems and Counting Up............................306 Counting-Up Strategy.........................................677 Counting-Up Strategy and Subtraction.........................69Conclusion.....................................................78Practice Pages for Instructors.................................79Scratch page...................................................82About the Author...............................................83
Chapter One
Multiplication and the Time Table ChartAt this point, students learn the rules for multiplying by 0 and 1. Rule for multiplying by 0: Any number multiplied by 0 is equal to 0.
0 × 1 = 0 0 × 4 = 0 0 × 7 = 0 0 × 10 = 0 0 × 2 = 0 0 × 5 = 0 0 × 8 = 0 0 × 11 = 0 0 × 3 = 0 0 × 6 = 0 0 × 9 = 0 0 × 12 = 0
Rule for multiplying by 1: Any number multiplied by 1 is equal to that same number.
1 × 1 = 1 1 × 4 = 4 1 × 7 = 7 1 × 10 = 10 1 × 2 = 2 1 × 5 = 5 1 × 8 = 8 1 × 11 = 11 1 × 3 = 3 1 × 6 = 6 1 × 9 = 9 1 × 12 = 12
To be sure students learn these two rules, have them write out the entire time table, multiplying each number from 1 to 12 by 0, showing the product of 0 for each set of two factors; have them repeat the same step to illustrate the second rule, multiplying each of the factors by 1 and showing the product.
These two rules are very simple and are usually easy for students to learn. It is usually not necessary to use the counting-up strategy to help students understand these two principles.
Now it is time to move on to the rest of the time table chart. Do not focus on how much of the time table chart students are able to remember at this point. This exercise is simply to help students become acquainted with the time table chart as a concept. Once students begin to apply the strategy of counting up, they will learn the time table chart in its entirety through repetition and practice.
Students should be given a time table chart to use when multiplication is introduced. This is simply to provide students with a visual aid to follow as the time tables are discussed.
Review each factor of the chart in its entirety. Because the rule of multiplying using the multiple of 1 has already been introduced, it should be reviewed briefly. Move on to the 2s, the 3s, and so forth, in sequence, until the entire time table chart from 1 to 12 has been introduced. Copies of the time table charts should not be used when students are applying the strategy of counting up.
Students tend to rely on the chart to determine the product of multiples rather than applying any type of problem-solving strategy. The charts should not be left in the possession of students, but passed out when the time tables are introduced and then collected at the conclusion of the lesson.
Time Table Chart and Basic Principles of Multiplication
Oral practice drills should be a 5- to 10-minute segment of daily instruction.
Chapter Two
Skip CountingNow it is time to introduce students to the concept of skip counting by the numbers 2, 3, 5, and 10. Students must learn to add the number with which they are skip counting to each preceding product in sequence, using time table multiples, beginning with 1 and ending with 12. Students will learn to identify only the product of each set of multiples 1–12 multiplied by the table of 2, 3, 5, and 10.
Skip Counting by 2 Time Table of 2
2 × 1 = 2 2 × 4 = 8 2 × 7 = 14 2 × 10 = 20 2 × 2 = 4 2 × 5 = 10 2 × 8 = 16 2 × 11 = 22 2 × 3 = 6 2 × 6 = 11 2 × 9 = 18 2 × 12 = 24
Students will practice repeating the product of each set of multiples from the table of 2 in sequence until it is learned. Students are able to gesture using their fingers as they count aloud.
Practice Sequence
2 4 6 8 10 12 14 16 18 20 22 24
Skip Counting by 3 Time Table of 3
3 × 1 = 3 3 × 4 = 12 3 × 7 = 21 3 × 10 = 30 3 × 2 = 6 3 × 5 = 15 3 × 8 = 24 3 × 11 = 33 3 × 3 = 9 3 × 6 = 18 3 × 9 = 27 3 × 12 = 36
Students will practice repeating the product of each set of multiples from the table of 3 in sequence until it is learned. Students are able to gesture using their fingers as they count aloud.
Practice Sequence
3 6 9 12 15 18 21 24 27 30 33 36
Skip Counting by 5 Time Table of 5
5 × 1 = 5 5 × 4 = 20 5 × 7 = 35 5 × 10 = 50 5 × 2 = 10 5 × 5 = 25 5 × 8 = 40 5 × 11 = 55 5 × 3 = 15 5 × 6 = 30 5 × 9 = 45 5 × 12 = 60
Students will practice repeating the product of each set of multiples from the table of 5 in sequence until it is learned. Students are able to gesture using their fingers as they count aloud. While students may stop at 60, the illustrations continue up to 100.
Practice Sequence
5 10 15 20 25 30 35 40 45 50 55 60 65 70
75 80 85 90 95 100
Skip Counting by 10 Time Table of 10
10 × 1 = 10 10 × 4 = 40 10 × 7 = 70 10 × 10 = 100 10 × 2 = 20 10 × 5 = 50 10 × 8 = 80 10 × 11 = 110 10 × 3 = 30 10 × 6 = 60 10 × 9 = 90 10 × 12 = 120
Students will practice repeating the product of each set of multiples from the table of 10 in sequence until it is learned. Students are able to gesture using their fingers as they count aloud.
Practice Sequence
10 20 30 40 50 60 70 80 90 100 110 120
Chapter Three
Introducing Long DivisionAfter students become familiar with multiplication, division can be introduced. I prefer to teach students long division using pencil and paper. It is very important to introduce students to key terms that are associated with division, such as inverse operations (operations that undo each other). The rules for dividing by 0 and 1 must also be introduced at this time.
Once students have become familiar with the terms associated with division, allow students to begin manual practice by assisting them as they solve several long-division problems using scratch paper and a pencil. Note the example below.
Long Division
6 [square root of 42]
Step 1: Help students determine the target number for the equation. The target number in this equation is 42.
Step 2: Students determine which multiplication table will be used to solve the equation. In this equation, the table of 6 will be used, because it must be determined how many times 6 will divide into 42.
Step 3: Students write out the first multiple of the table of 6, which will be 1. (This step process of writing out the table of 6 will continue until the missing multiple is identified that will produce a product of 42 when multiplied by 6.)
6 × 1 = 6
Students apply the strategy of counting up using their fingers to help them determine the next product, of 6 times 2.
6 × 2 =?
Students begin with the number 6 and count up 6 spaces, raising one finger as each number is counted aloud until 6 spaces have been counted.
6, 7 8 9 10 11 12
Students have counted up 6 spaces from the product of 6 x1 = 6, so they know that 6 × 2 = 12. Students manually list the new product.
6 × 1 = 6 6 × 2 = 12
Now students begin the process again to determine the product of the next factor, which is 3. To determine the new product, students will count 6 spaces up from the product of 12. Students will raise one finger as they count up each space.
6 × 3 =?
12, 13 14 15 16 17 18
Students have counted up 6 spaces from the product of 6 × 2 = 12, so they know that 6 × 3 = 18. Students manually list the new product.
6 × 1 = 6 6 × 2 = 12 6 × 3 = 18
Now students begin the process again to determine the product of the next factor, which is 4. To determine the new product, students will count up 6 spaces from the product of 18. Students will raise one finger as they count up each space.
6 × 4 =
18, 19 20 21 22 23 24
Students have counted up 6 spaces from the product of 6 × 3 = 18, so they know that 6 × 4 = 24. Students manually list the new product.
6 × 1 = 6 6 × 2 = 12 6 × 3 = 18 6 × 4 = 24
Now students begin the process again to determine the product of the next factor, which is 5. To determine the new product, students will count up 6 spaces from the product of 24. Students will raise one finger as they count up each space.
6 × 5 = 19 24, 25 26 27 28 29 30
Students have counted up 6 spaces from the product of 6 × 4 = 24, so they know that 6 × 5 = 30. Students manually list the new product.
6 × 1 = 6 6 × 2 = 12 6 × 3 = 18 6 × 4 = 24 6 × 4 = 30
Now students begin the process again to determine the product of the next factor, which is 6. To determine the new product, students will count up 6 spaces from the product of 30. Students will raise one finger as they count up each space.
6 × 6 =
30, 31 32 33 34 35 36
Students have counted up 6 spaces from the product of 6 × 5 = 30, so they know that 6 × 6 = 36. Students manually list the new product.
6 × 1 = 6 6 × 5 = 30 6 × 2 = 12 6 × 6 = 36 6 × 3 = 18 6 × 4 = 24
Now students begin the process again to determine the product of the next factor, which is 7. To determine the new product, students will count up 6 spaces from the product of 36. Students will raise one finger as they count up each space.
6 × 7 =
36, 37 38 39 40 41 42
Students have counted up 6 spaces from the product of 6 × 6 = 36, so they know that 6 × 7 = 42. Students manually list the new product.
6 × 1 = 6 6 × 5 = 30 6 × 2 = 12 6 × 6 = 36 6 × 3 = 18 6 × 7 = 42 6 × 4 = 24
At this point, help students recognize that the target number of 42 has been identified. 6 × 7 = 42, so 6 will divide into 42, 7 times. Students will manually write out the entire step.
Now explain to students the entire process: 6 × 7 = 42; to determine the remainder, subtract the product from the target number. 42 – 42 is equal to 0 for a remainder.
It is very important to model this step on the chalkboard and with students individually until they grasp the concept
7/6| 42 – 42/0 R
Students will use scratch paper to manually write out the table of 6 as they identify each new product until the target number is reached. Once the target number is reached, students will manually write out each step in the process of solving the long-division equation. The classroom teacher should identify mistakes and areas of weakness by reviewing the scratch paper and reviewing concepts as necessary.
Long Division: Table of 8
72 ÷ 8 =
Step 1: Help students determine the target number for the equation. The target number in this equation is 72.
Step 2: Students determine which multiplication table will be used to solve the equation. In this equation, the table of 8 will be used, because it must be determined how many times 8 will divide into 72.
Step 3: Students write out the first multiple of the table of 8, which will be 1. (This process of writing out the table of 8 will continue until the missing multiple is identified that will produce a product of 72 when multiplied by 8.)
8 × 1 = 8
Step 4: Students apply the strategy of counting up using their fingers to help them determine the next product, of 8 times 2.
8 × 2 =
8, 9 10 11 12 13 14 15 16
Students have counted up 8 spaces from the product of 8 × 1 = 8, so they know that 8 × 2 = 16. Students manually list the new product.
8 × 1 = 8 8 × 2 = 16
Now students begin the process again to determine the product of the next factor, which is 3. To determine the new product, students count up 8 spaces from the product of 16. Students will raise one finger as they count up each space.
8 × 3 =
16, 17 18 19 20 21 22 23 24
Students have counted up 8 spaces from the product of 8 × 2 = 16, so they know that 8 × 3 = 24. Students manually list the new product.
8 × 1 = 8 8 × 2 = 16 8 × 3 = 24
Now students begin the process again to determine the product of the next factor, which is 4. To determine the new product, students count up 8 spaces from the product of 24. Students will raise one finger as they count up each space.
8 × 4 =
24, 25 26 27 28 29 30 31 32
Students have counted up 8 spaces from the product of 8 × 3 = 24, so they know that 8 × 4 = 32. Students manually list the new product.
8 × 1 = 8 8 × 2 = 16 8 × 3 = 24 8 × 4 = 32
Now students begin the process again to determine the product of the next factor, which is 5. To determine the new product, students count up 8 spaces from the product of 32. Students will raise one finger as they count up each space.
8 × 5 =
32, 33 34 35 36 37 38 39 40
Students have counted up 8 spaces from the product of 8 × 4 = 32, so they know that 8 × 5 = 40. Students manually list the new product.
8 × 1 = 8 8 × 5 = 40 8 × 2 = 16 8 × 3 = 24 8 × 4 = 32
Now students begin the process again to determine the product of the next factor, which is 6. To determine the new product, students count up 8 spaces from the product of 40. Students will raise one finger as they count up each space.
8 × 6 =
40, 41 42 43 44 45 46 47 48
Students have counted up 8 spaces from the product of 8 × 5 = 40, so they know that 8 × 6 = 48. Students manually list the new product.
8 × 1 = 8 8 × 5 = 40 8 × 2 = 16 8 × 6 = 48 8 × 3 = 24 8 × 4 = 32
Now students begin the process again to determine the product of the next factor, which is 7. To determine the new product, students count up 8 spaces from the product of 48. Students will raise one finger as they count up each space.
8 × 7 =
48, 49 50 51 52 53 54 55 56
Students have counted up 8 spaces from the product of 8 × 6 = 48, so they know that 8 × 7 = 56. Students manually list the new product.
8 × 1 = 8 8 × 5 = 40 8 × 2 = 16 8 × 6 = 48 8 × 3 = 24 8 × 7 = 56 8 × 4 = 32
Now students begin the process again to determine the product of the next factor, which is 8. To determine the new product, students count up 8 spaces from the product of 56. Students will raise one finger as they count up each space
8 × 8 =
56, 57 58 59 60 61 62 63 64
Students have counted up 8 spaces from the product of 8 × 7 = 56, so they know that 8 × 8 = 64. Students manually list the new product.
8 × 1 = 8 8 × 6 = 48 8 × 2 = 16 8 × 7 = 56 8 × 3 = 24 8 × 8 = 64 8 × 4 = 32 8 × 5 = 40
(Continues...)
Excerpted from Teach Multiplication, Division, and the Time Table All at the Same Timeby Andray McCuien Copyright © 2011 by Andray McCuien. Excerpted by permission of AuthorHouse. All rights reserved. No part of this excerpt may be reproduced or reprinted without permission in writing from the publisher.
Excerpts are provided by Dial-A-Book Inc. solely for the personal use of visitors to this web site.
"About the title" may belong to another edition of this title.
Shipping rates from Germany to U.S.A.
| Item | 7 to 10 business days | 5 to 7 business days |
|---|---|---|
| First item | US$ 38.99 | US$ 50.13 |
Payment methods
- Bank Wire Transfer
- Check
- Paypal
Store description
Das Unternehmen AHA-BUCH GmbH: Seit der Gründung von AHA-BUCH im Juli 2005 ist unser Hauptziel, zufriedenen Kunden so schnell und so preisgünstig wie möglich ihren Bücherwunsch zu erfüllen. Unsere Firma beschäftigt 16 Mitarbeiter, die nur ein Ziel kennen: den Kunden und seine Wünsche! Auf über 3700 m2 Fläche haben wir über 100.000 Bücher, Modernes Antiquariat und Spiele auf Lager.
Specialty
Kinderbücher & Kinderhör Casetten, German Books, Software, Natur & Tiere, Ratgeber, Sachbücher, Englische Bücher, Medizin & Gesundheit, Universität & StudiumSeller's business information
AHA-BUCH GmbH
Garlebsen 48
Einbeck, Germany 37574
Terms of sale
General Terms and Conditions and Customer Information / Privacy Policy
I. General Terms and Conditions
§ 1 Basic provisions
(1) The following terms and conditions apply to all contracts that you conclude with us as a provider (AHA-BUCH GmbH) via the Internet platforms AbeBooks and/or ZVAB. Unless otherwise agreed, the inclusion of any of your own terms and conditions used by you will be objected to
(2) A consumer within the meaning of the following regulations is any natural person who concludes a legal transaction for purposes that can predominantly be attributed neither to their commercial nor their independent professional activity. An entrepreneur is any natural or legal person or a partnership with legal capacity who, when concluding a legal transaction, acts in the exercise of his independent professional or commercial activity.
§ 2 Conclusion of the contract
(1) The object of the contract is the sale of goods.
(2) If an article is listed by us at AbeBooks or ZVAB, the activation of the offer page at AbeBooks or ZVAB constitutes the binding offer to conclude a contract under the conditions contained in the article page.
(3) The contract is concluded via the online shopping cart system as follows:
The goods intended for purchase are stored in the "shopping cart". Via the corresponding button in the navigation bar you can call up the "shopping cart" and make changes there at any time.
After calling up the "Checkout" page and entering the personal data as well as the payment and shipping conditions, all order data will be displayed again on the order overview page.
Before sending the order, you have the option of checking all information again, changing it (also via the "back" function of the Internet browser) or cancelling the purchase.
By submitting the order via the "Buy now" button, you declare the acceptance of the offer in a legally binding manner, whereby the contract is concluded.
(4) The processing of the order and transmission of all information required in connection with the conclusion of the contract is partly automated by e-mail. You must therefore ensure that the e-mail address you have stored with us is correct, that the receipt of the e-mails is technically ensured and, in particular, that spam filters do not prevent it.
§ 3 Right of retention, retention of title
(1) You can only exercise a right of retention if it concerns claims from the same contractual relationship.
(2) The goods remain our property until full payment of the purchase price.
§ 4 Warranty
(1) The statutory warranty rights exist.
(2) In the case of used goods, the warranty period is one year from delivery of the item, deviating from the statutory regulation. The shortening of the deadline does not apply:
- culpably caused damages attributable to us from injury to life, limb or health and in the case of other damages caused intentionally or through gross negligence;
- insofar as we have fraudulently concealed the defect or have assumed a guarantee for the quality of the item.
(3) As a consumer, you are requested to check the item immediately upon delivery for completeness, obvious defects and transport damage and to inform us and the freight forwarder of any complaints as soon as possible. If you do not comply with this, this will have no effect on your statutory warranty claims.
§ 5 Choice of law, place of performance, place of jurisdiction
(1) German law shall apply. In the case of consumers, this choice of law shall only apply insofar as this does not withdraw the protection afforded by mandatory provisions of the law of the state of the consumer's habitual residence (principle of favourability).
(2) The place of performance for all services arising from the existing business relationships with us as well as the place of jurisdiction is our registered office, insofar as you are not a consumer, but a merchant, a legal entity under public law or a special fund under public law. The same applies if you do not have a general place of jurisdiction in Germany or the EU or if the domicile or habitual residence is not known at the time the action is brought. The right to appeal to the court at another statutory place of jurisdiction remains unaffected by this.
(3) The provisions of the UN Convention on Contracts for the International Sale of Goods shall expressly not apply.
II. Customer Information
- Identity of the Seller
AHA-BUCH GmbH
Garlebsen 48
D-37574 Einbeck
Germany
Telephone: 055639996039
E-mail: abebooks@aha-buch.de.
Alternative dispute resolution:
The European Commission provides a platform for out-of-court online dispute resolution (ODR platform), which can be accessed under https://ec.europa.eu/odr.
- Information on the conclusion of the contract
The technical steps for the conclusion of the contract, the conclusion of the contract itself and the correction options are carried out in accordance with the provisions "Conclusion of the contract" of our General Terms and Conditions (Part I.).
- Contract language, contract text storage
3.1. The contract language is german.
3.2. The complete text of the contract will not be stored by us. Before sending the order, the contract data can be printed out or electronically saved via the print function of the browser. After receipt of the order by us, the order data, the legally prescribed information for distance contracts and the General Terms and Conditions will be sent to you again by e-mail.
- Essential characteristics of the goods or services
The essential characteristics of the goods and/or services can be found in the respective offer.
- Prices and terms of payment
5.1. The prices stated in the respective offers as well as the shipping costs represent total prices. They include all price components including all applicable taxes.
5.2. The shipping costs incurred are not included in the purchase price. They can be called up via a correspondingly designated button on our website or in the respective offer, are shown separately in the course of the ordering process and are to be borne by you in addition, unless free shipping has been promised.
5.3. If the delivery is made to countries outside the European Union, we may incur additional costs for which we are not responsible, such as.B customs duties, taxes or money transfer fees (transfer or exchange rate fees of the credit institutions), which are to be borne by you. Any costs incurred for the transfer of money shall also be borne by you in cases where the delivery is made to an EU member state, but the payment was initiated outside the European Union.
5.4. The payment methods available to you are indicated under a corresponding button on our website or in the respective offer.
5.5. Unless otherwise stated for the individual payment methods, the payment claims from the concluded contract are due for payment immediately.
- Terms of delivery
6.1. The terms of delivery, the delivery date and, if applicable, existing delivery restrictions can be found under a correspondingly designated button on our website or in the respective offer.
Insofar as no other deadline is specified in the respective offer or under the correspondingly designated button, the delivery of the goods will take place within 3-5 days after conclusion of the contract (in the case of agreed advance payment, however, only after the time of your payment instruction).
6.2. Insofar as you are a consumer, it is regulated by law that the risk of accidental loss and accidental deterioration of the sold item during dispatch shall only pass to you upon handover of the goods, regardless of whether the shipment is insured or uninsured. This does not apply if you have independently commissioned a transport company not named by the entrepreneur or a person otherwise designated to carry out the shipment.
- Statutory liability for defects
Liability for defects is governed by the "Warranty" provision in our General Terms and Conditions (Part I).
last update: 01/06/2022
Privacy policy
Unless otherwise stated below, the provision of your personal data is neither required by law or contract, nor is it necessary for the conclusion of a contract. You are not obliged to provide the data. Failure to provide this will have no consequences. This only applies if no other information is provided in the subsequent processing operations.
Collection, processing and disclosure of personal data when placing orders
When ordering, we collect and process your personal data only to the extent necessary to fulfil and process your order and to process your enquiries. The provision of the data is necessary for the conclusion of the contract. Failure to provide this provision means that no contract can be concluded. The processing takes place on the basis of Art. 6 para. 1 lit.b GDPR and is necessary for the performance of a contract with you.
Your data will be passed on, for example, to the shipping companies and dropshipping providers selected by you, payment service providers, service providers for order processing and IT service providers.
In all cases, we strictly observe the legal requirements. The scope of data transmission is limited to a minimum.
Duration of storage
After completion of the contract, the data will first be stored for the duration of the warranty period, then taking into account legal, in particular tax and commercial retention periods and then deleted after expiry of the period, unless you have consented to further processing and use.
Rights of the data subject
If the legal requirements are met, you have the following rights under Articles 15 to 20 GDPR: Right to information, to correction, to erasure, to restriction of processing, to data portability.
In addition, pursuant to Article 21 (1) GDPR, you have the right to object to processing based on Article 6 (1) f GDPR and to processing for direct marketing purposes.
Contact us on request. The contact details can be found in our imprint.
Right to lodge a complaint with the supervisory authority
In accordance with Article 77 GDPR, you have the right to complain to the supervisory authority if you believe that the processing of your personal data is not lawful.
Right to object
If the personal data processing listed here is based on our legitimate interest pursuant to Art. 6 para. 1 lit. f GDPR, you have the right to object to this processing at any time with effect for the future for reasons arising from your particular situation.
Shipping terms
We ship your order after we received them
for articles on hand latest 24 hours,
for articles with overnight supply latest 48 hours.
In case we need to order an article from our supplier our dispatch time depends on the reception date of the articles, but the articles will be shipped on the same day.
Our goal is to send the ordered articles in the fastest, but also most efficient and secure way to our customers.