Two-phase Heat Transfer Enhancement

This Brief concerns heat transfer and pressure drop in heat transfer enhancement for boiling and condensation. The authors divide their topic into six areas: abrasive treatment and coatings, combined structured and porous surfaces, basic principles of boiling mechanism, vapor space condensation, convective vaporization, and forced condensation inside tubes. Within this framework, the book examines range of specific phenomena including  abrasive treatment, open grooves, 3D cavities, etched surfaces, electroplating, pierced 3D cover sheets, attached wire and screen promoters, non-wetting coatings, oxide and ceramic coatings, porous surfaces, structured surfaces (integral roughness), combined structured and porous surfaces, composite surfaces, single-tube pool boiling tests, theoretical fundamentals like liquid superheat, effect of cavity shape and contact angle on superheat, entrapment of vapor in cavities, nucleation at a surface cavity, effect of dissolved gases, bubble departure diameter, bubble dynamics, boiling hysteresis and orientation effects, basic principles of boiling mechanism, visualization and mechanism of boiling in subsurface tunnels, and Chien and Webb parametric boiling studies.

Sujoy Kumar Saha is a Professor in the Mechanical Engineering Department of the Indian Institute of Engineering Science and Technology, Shibpur Howrah, West Bengal, India.

Madhu Sruthi Emani is a doctoral candidate working under the supervision of Dr. Sujoy Kumar Saha, at Indian Institute of Engineering Science and Technology, Shibpur, Howrah, India. She is working in the area of Heat Transfer Enhancement for her PhD thesis.

Anand Kumar Bharti is a doctoral candidate working under the supervision of Dr. Sujoy Kumar Saha, at Indian Institute of Engineering Science and Technology, Shibpur, Howrah, India. He is working in the area of Heat Transfer Enhancement for his PhD thesis.

Hrishiraj Ranjan is a doctoral candidate working under the supervision of Dr. Sujoy Kumar Saha, at Indian Institute of Engineering Science and Technology, Shibpur, Howrah, India. He is working in the area of Heat Transfer Enhancement for his PhD thesis.