WB 57F Long Wing; NASA JSC

Decal/sticker with backing that can be removes so that adhesive side and be affixed to an appropriate surface. Oval shape, approximately 6 inches in maximum length and 3 inches in maximum width. Center is an image of the aircraft looking down upon it. At the top of the oval is "WB" to the left of the aircraft nose and "57F" to the right. The letters "NASA" is over the left wing and the letters "JSC" are over the right wing. Under the left wing is the word "Long" and under the right wing is the word "Wing". The field is largely blue with a gold border. Lettering is in red, white, and gold. The NASA WB-57 Program provides unique, high-altitude airborne platforms to US Government agencies, academic institutions, and commercial customers in order to support scientific research and advanced technology development and testing at locations around the world. Mission examples include atmospheric and earth science, ground mapping, cosmic dust collection, rocket launch support, and test bed operations for future airborne or spaceborne systems. The NASA Johnson Space Center (JSC) in Houston, Texas is the home of the NASA WB-57 High Altitude Research Program. Three fully operational WB-57 aircraft are based near JSC at Ellington Field. The aircraft have been flying research missions since the early 1960's, and continue to be an asset to the scientific community with professional, reliable, customer-oriented service designed to meet all scientific objectives. A decal or transfer is a plastic, cloth, paper, or ceramic substrate that has printed on it a pattern or image that can be moved to another surface upon contact. The word is short for decalcomania, which is the English version of the French word décalcomanie. The technique was invented by Simon François Ravenet, an engraver from France who later moved to England and perfected the process he called "décalquer" (which means to copy by tracing); it became widespread during the decal craze or mania of the late 19th century. A decal consists of the following layers from top to bottom: A paper or film facestock makes up the top layer of the label stock. The printing is done on the upper side of the facestock; An adhesive layer is applied to the bottom of the facestock; A silicone or release coating layer is applied to the upper side of the backing material; and A paper or film liner provides the bottom layer of the label stock. The Martin/General Dynamics RB-57F Canberra is a specialized strategic reconnaissance aircraft developed in the 1960s for the United States Air Force by General Dynamics from the Martin B-57 Canberra tactical bomber, which itself was a license-built version of the English Electric Canberra. It was operationally assigned to the Air Weather Service for weather reconnaissance involving high-altitude atmospheric sampling and radiation detection in support of nuclear test monitoring, but four of the 21 modified aircraft performed solely as strategic reconnaissance platforms in Japan and Germany. Three of the modified aircraft were destroyed with loss of their crews while performing operationally. The remainder were re-designated WB-57F in 1968. Four of the survivors were subsequently used by NASA for high-altitude atmospheric research. The others were retired from 1972 to 1974 and placed in storage. As of 2015, three WB-57Fs are the only B-57 aircraft model still flying, in service with NASA. The WB-57 is a mid-wing, long-range aircraft capable of operation for extended periods of time from sea level to altitudes well in excess of 60,000 feet. Two crew members are positioned at separate tandem stations in the cockpit. The pilot station contains all the essential equipment for flying the aircraft. The sensor operator station contains both navigational equipment and controls for the operation of the payloads and payload support systems located throughout the aircraft. The WB-57 can remain aloft for approximately 6.5 hours, flying both day and night, so long as separation fro.…