Water level & pump control Monitoring system: A guide to design Water level & pump control Monitoring system

In recent times many underground water supply systems have seen several technological advances. Among these technological advances is the mechanization of the well/bole hole water. In most rural settings a mechanical pump is attached to the bole hole. These pumps draw water from underground through strokes on a level system mounted at the top of the bole hole. This type of bole holes needs a lot of manual labour from the consumer and may in many cases cause undue delays to reach quality water. A typical solution to ease the consumer is the introduction of an electrical pump system. The electrical pump is supplied with a source of electricity to pump underground water through pipes fixed on the well. There is always the need to control the electrical pump and the reservoir. Various forms exist. The emergent microcontroller can be used in this water supply system as a form of the control module.