Denni Kurniawan (20 results)

Condition: New.

Condition: New.

Condition: New.

Taschenbuch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - Master's Thesis from the year 2008 in the subject Engineering - Mechanical Engineering, grade: Satisfactory, University College of Technology and Innovation, Malaysia (Universiti Teknologi Malaysia), language: English, abstract: The feasibility of implementing hard turning partially depends on the performance of the cutting tool in generating the required machined parts. Since process efficiency is a continuous pursue, there is always a need of having inexpensive cutting tools able to deliver the expected quality of machined surfaces and having reasonable life times. For this purpose, the selection of cutting conditions and its performance are important. In this study, a carbide tool with TiAlN coating is proposed as the low cost alternative for performing moderate range of hard turning. Specifically, a coated carbide tool with wiper geometry was used to machine hardened martensitic stainless steel (47 - 48 HRC). The tool's performance is evaluated based on its tool life and the resulting surface finish when hard turning at various cutting speeds (100, 130, and 170 m/min) and feeds (0.125, 0.16, 0.2, and 0.25 mm/rev) and at constant depth of cut of 0.4 mm under dry condition. Further observation was made on the worn tool, the machined surface, and the generated chip. The wiper coated carbide tool lasts mostly beyond 2 minutes and even reaches a maximum of almost 18 minutes of service life time.Combination of abrasion and diffusion are suggested to be the main wear mechanisms of the cutting tool. The resulting surface finish is very fine, being entirely finer than 0.8 mim in Ra which is one level better than the theoretically expected value. Empirical models are developed to quantify the effect of cutting speed and feed to the tool life and Ra. Further observation at the optimum processparameter combination, for example the lowest cutting speed-lowest feed, reveals minimum machining-induced surface microstruct. …

Condition: As New. Unread book in perfect condition.

Paperback. Condition: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Condition: As New. Unread book in perfect condition.

Condition: Hervorragend. Zustand: Hervorragend | Seiten: 392 | Sprache: Englisch | Produktart: Bücher | This book presents an exploration of contemporary challenges and opportunities in manufacturing and supply chain management, expected to provide insights for academics and industry professionals. This is the first volume of a two-volume proceedings series curated from over 100 submissions from the Global Congress on Manufacturing and Management (GCMM 2023) held in Kuching, Malaysia on December 4-7, 2023. The chapters cover a broad spectrum of industries, including automotive, electronics, food, and energy, with a wide range of topics, from the adoption of new technologies like induction stoves and electric vehicles, to the optimization of production facilities and supply chain resilience. …

Taschenbuch. Condition: Neu. Advances in Manufacturing Processes and Smart Manufacturing Systems | Smart Materials and Manufacturing Systems and Sustainable Management Operations, Volume 1 | Denni Kurniawan (u. a.) | Taschenbuch | Lecture Notes in Networks and Systems | xii | Englisch | 2024 | Springer | EAN 9783031803406 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.…

Taschenbuch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book presents an exploration of contemporary challenges and opportunities in manufacturing and supply chain management, expected to provide insights for academics and industry professionals. This is the first volume of a two-volume proceedings series curated from over 100 submissions from the Global Congress on Manufacturing and Management (GCMM 2023) held in Kuching, Malaysia on December 4-7, 2023. The chapters cover a broad spectrum of industries, including automotive, electronics, food, and energy, with a wide range of topics, from the adoption of new technologies like induction stoves and electric vehicles, to the optimization of production facilities and supply chain resilience.…

Softcover. Condition: gut. 2024. Advances in Manufacturing Processes and Smart Manufacturing Systems In deutscher Sprache. pages.

Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Master's Thesis from the year 2008 in the subject Engineering - Mechanical Engineering, grade: Satisfactory, University College of Technology and Innovation, Malaysia (Universiti Teknologi Malaysia), language: English, abstract: The feasibility of implementing hard turning partially depends on the performance of the cutting tool in generating the required machined parts. Since process efficiency is a continuous pursue, there is always a need of having inexpensive cutting tools able to deliver the expected quality of machined surfaces and having reasonable life times. For this purpose, the selection of cutting conditions and its performance are important. In this study, a carbide tool with TiAlN coating is proposed as the low cost alternative for performing moderate range of hard turning. Specifically, a coated carbide tool with wiper geometry was used to machine hardened martensitic stainless steel (47 - 48 HRC). The tool's performance is evaluated based on its tool life and the resulting surface finish when hard turning at various cutting speeds (100, 130, and 170 m/min) and feeds (0.125, 0.16, 0.2, and 0.25 mm/rev) and at constant depth of cut of 0.4 mm under dry condition. Further observation was made on the worn tool, the machined surface, and the generated chip. The wiper coated carbide tool lasts mostly beyond 2 minutes and even reaches a maximum of almost 18 minutes of service life time.Combination of abrasion and diffusion are suggested to be the main wear mechanisms of the cutting tool. The resulting surface finish is very fine, being entirely finer than 0.8 mim in Ra which is one level better than the theoretically expected value. Empirical models are developed to quantify the effect of cutting speed and feed to the tool life and Ra. Further observation at the optimum processparameter combination, for example the lowest cutting speed-lowest feed, reveals minimum machining-induced surface microstruct 108 pp. Englisch. …

Taschenbuch. Condition: Neu. Tool life and surface integrity when hard turning stainless steel using wiper coated carbide tool | Denni Kurniawan | Taschenbuch | 108 S. | Englisch | 2012 | GRIN Verlag | EAN 9783656193234 | Verantwortliche Person für die EU: GRIN Publishing GmbH, Waltherstr. 23, 80337 München, info[at]grin[dot]com | Anbieter: preigu Print on Demand.…

Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt.

Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt.

Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This book presents an exploration of contemporary challenges and opportunities in manufacturing and supply chain management, expected to provide insights for academics and industry professionals. This is the first volume of a two-volume proceedings series curated from over 100 submissions from the Global Congress on Manufacturing and Management (GCMM 2023) held in Kuching, Malaysia on December 4-7, 2023. The chapters cover a broad spectrum of industries, including automotive, electronics, food, and energy, with a wide range of topics, from the adoption of new technologies like induction stoves and electric vehicles, to the optimization of production facilities and supply chain resilience. 392 pp. Englisch.…

Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This book emphasizes the increasing role of smart technologies, the exploration of sustainable materials, and the importance of efficient processes across different sectors, offering beneficial insights for academics and industry professionals. This second in a two-part series from the Global Congress on Manufacturing and Management (GCMM 2023) which was held in Kuching, Malaysia, on December 4-7, 2023, presents the use of Internet of Things for the control and monitoring of systems, sustainable and efficient practices, smart systems development, logistics service processes, supplier selection, and optimization of manufacturing processes. 360 pp. Englisch.…

Taschenbuch. Condition: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - This book emphasizes the increasing role of smart technologies, the exploration of sustainable materials, and the importance of efficient processes across different sectors, offering beneficial insights for academics and industry professionals. This second in a two-part series from the Global Congress on Manufacturing and Management (GCMM 2023) which was held in Kuching, Malaysia, on December 4-7, 2023, presents the use of Internet of Things for the control and monitoring of systems, sustainable and efficient practices, smart systems development, logistics service processes, supplier selection, and optimization of manufacturing processes.…

Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -This book emphasizes the increasing role of smart technologies, the exploration of sustainable materials, and the importance of efficient processes across different sectors, offering beneficial insights for academics and industry professionals. This second in a two-part series from the Global Congress on Manufacturing and Management (GCMM 2023) which was held in Kuching, Malaysia, on December 4-7, 2023, presents the use of Internet of Things for the control and monitoring of systems, sustainable and efficient practices, smart systems development, logistics service processes, supplier selection, and optimization of manufacturing processes.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 360 pp. Englisch.…

Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -This book presents an exploration of contemporary challenges and opportunities in manufacturing and supply chain management, expected to provide insights for academics and industry professionals. This is the first volume of a two-volume proceedings series curated from over 100 submissions from the Global Congress on Manufacturing and Management (GCMM 2023) held in Kuching, Malaysia on December 4-7, 2023. The chapters cover a broad spectrum of industries, including automotive, electronics, food, and energy, with a wide range of topics, from the adoption of new technologies like induction stoves and electric vehicles, to the optimization of production facilities and supply chain resilience.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 392 pp. Englisch.…