Limaye Ameya (3 results)

Taschenbuch. Condition: Neu. Process Planning Method for Mask Projection Stereolithography | Design and Analysis of a freeform microfabrication system and process | Ameya Limaye | Taschenbuch | Englisch | VDM Verlag Dr. Müller | EAN 9783639154535 | Verantwortliche Person für die EU: VDM Verlag Dr. Müller, Brivibas Gatve 197, 1039 RIGA, LETTLAND, customerservice[at]vdm-vsg[dot]de | Anbieter: preigu. …

Kartoniert / Broschiert. Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Limaye AmeyaDr. Ameya Limaye completed his Bachelors in Mechanical nEngineering from University of Pune, India, and acquired his nMaster s and Doctorate degrees in Mechanical Engineering from nGeorgia Institute of Technology, Atlant.…

Taschenbuch. Condition: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Mask Projection Stereolithography is a high resolution manufacturing process that builds parts layer by layer in a photopolymer. A MPSLA system is designed and assembled. The irradiance incident on the resin surface when a given bitmap is imaged onto it is modeled as the Irradiance model. Print-through errors occur in multi-layered builds because of radiation penetrating beyond the intended thickness of a layer, causing unwanted curing. In this research, the print through errors are modeled in terms of the process parameters used to build a multi layered part. To this effect, the Transient layer cure model is formulated, that models the curing of a layer as a transient phenomenon, in which, the rate of radiation attenuation changes continuously during exposure. The print through model is used to formulate a process planning method to cure multi-layered parts with accurate vertical dimensions. The models formulated and validated in this work are used to formulate a process planning method to build MPSLA parts with constraints on dimensions, surface finish and build time. The process planning method is demonstrated by means of a case study.…