Published by The American Society for Metals
Seller: ThriftBooks-Atlanta, AUSTELL, GA, U.S.A.
Hardcover. Condition: Good. No Jacket. Missing dust jacket; Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less.
Published by American Society for Metals, 1969
Seller: HPB-Red, Dallas, TX, U.S.A.
hardcover. Condition: Good. Connecting readers with great books since 1972! Used textbooks may not include companion materials such as access codes, etc. May have some wear or writing/highlighting. We ship orders daily and Customer Service is our top priority!
Published by American Society for Metals, 1969
Seller: Once Upon A Time Books, Siloam Springs, AR, U.S.A.
Hardcover. Condition: Good. This is a used book in good condition and may show some signs of use or wear . This is a used book in good condition and may show some signs of use or wear .
Language: English
Published by American Society for Metals, 1971
ISBN 10: 1124009876 ISBN 13: 9781124009872
Condition: Fair. Acceptable condition. Former Library book. 8th edition. Volume 6. (metals, welding, brazing, solder and soldering, handbooks) A readable, intact copy that may have noticeable tears and wear to the spine. All pages of text are present, but they may include extensive notes and highlighting or be heavily stained. Includes reading copy only books. Bundled media such as CDs, DVDs, floppy disks or access codes may not be included. NOT AVAILABLE FOR SHIPMENT OUTSIDE OF THE UNITED STATES.
Published by The American Society for Metals
Seller: ThriftBooks-Dallas, Dallas, TX, U.S.A.
Hardcover. Condition: Fair. No Jacket. Missing dust jacket; Readable copy. Pages may have considerable notes/highlighting. ~ ThriftBooks: Read More, Spend Less.
Published by American Society for Metals, Cleveland, OH, 1955
Seller: Florida Mountain Book Co., Datil, NM, U.S.A.
Condition: Good+. Hardcover, 208 pages. Good+ condition. Size 11"x8.5". Ex-library. Please see accompanying photos for contents. Book has moderate handling/shelfwear. Library stamps on title page & endpapers, and notations on the Handbook Committee/Officers/Members listing page. Text else clean and unmarked.
Published by American Society for Metals, Cleveland, OH, 1954
Seller: Florida Mountain Book Co., Datil, NM, U.S.A.
Condition: Good+. Hardcover, 184 pages. Good+ condition. Size 11"x8.5". Ex-library. Please see accompanying photos for contents. Book has moderate handling/shelfwear. Library stamps on title page & endpapers, and notations on the Handbook Committee/Officers/Members listing page. Text else clean and unmarked.
Published by American Society for Metals, 1961
Seller: HPB-Red, Dallas, TX, U.S.A.
Hardcover. Condition: Good. Connecting readers with great books since 1972! Used textbooks may not include companion materials such as access codes, etc. May have some wear or writing/highlighting. We ship orders daily and Customer Service is our top priority!
Published by American Society for Metals, 1967
Seller: HPB-Red, Dallas, TX, U.S.A.
hardcover. Condition: Good. Connecting readers with great books since 1972! Used textbooks may not include companion materials such as access codes, etc. May have some wear or writing/highlighting. We ship orders daily and Customer Service is our top priority!
Published by The Frank A. Munsey Company, New York, 1920
Seller: biblioboy, North Providence, RI, U.S.A.
First Edition
single issue magazine. Condition: Fair. First Edition. New York: The Frank A. Munsey Company. 1920. First Edition Pulp magazine. Pictorial wrappers, 143 pages, plus ads, illustrated. Includes the first of six parts of "Prairie Flowers" by James B. Hendryx, the second of six parts of "The Picture on the Wall" by J. Breckenridge Ellis, "Latitudes of Madness" by Magda Leight, "With Clean Hands" by Hamilton Craigie, etc. Reading/filler copy with spine torn, chipping to the ends, edgewear and creasing to the cover, front cover detached. 291E.
Published by American Society for Metals, 1960
Seller: Kingship Books, Vancouver, WA, U.S.A.
Hardcover. Condition: Good+. Large heavy book in pretty good condition. The covers have some mild to moderate rubbing, titles faded, spine ends bumped and very slightly worn, a little loose from use, spine slightly concave from laying the book flat. Gutter partly split at copyright page, opposite page has a wrinkle. The book is clean and unmarked throughout. This is the 1948 edition, reprinted here in 1960. Not available for overseas shipping.
HARDCOVER. 1st edition. 1444pp, thick quarto. rubbing to edges, cover wear, tight binding, owner label to front pdep, "Suggestion for Using." page taped to ffep, clean throughout, Good +.
Language: English
Published by American Society for Metals, 1971
Seller: Great Matter Books, Grand Rapids, MI, U.S.A.
Hardcover. Condition: Very Good. Dust Jacket Condition: Very Good. 5th or later Edition. Very Good condition hardcover book, Very Good condition dust jacket. Eighth Edition, First Printing 1971. Slightest shelf wear to covers and spine. Beautiful gilt lettering on spine and front cover. Very slight toning and smudging to text block edges. Pen on fpep. Dust jacket unclipped. Dust jacket has very slight shelf wear, slight smudging, and bumping to edges. Few small tears to edges, largest is about 1/2 inch. Jacket protected by mylar. All books are individually inspected and described. Never X-Library unless specifically described as such.
Published by The American Society for Metals, Cleveland, OH, 1954
Seller: Russ States, Oil City, PA, U.S.A.
Cloth. Condition: Good +. No Jacket. (1954), 1332pp, illus. w/ charts & graphs, bottom corners bumped, shelfwear to cover, owner's sticker to fep, slight soiling to eps, light creases to 1st few pgs (includes title page), some soiling to pg edges, no dj, contents clean, heavy - may require extra shipping.
Published by American Society for Metals, 1980
Seller: Martin Nevers- used & rare books, Oxford, FL, U.S.A.
Association Member: FABA
Hardcover. Condition: Very Good. Blue binding with gold lettering on spine and front cover. B/W illustrations and drawing scattered through the book. Photos of book on request.
Published by Washington Government Printing Office, 1901
Seller: Best Books And Antiques, Chandler, TX, U.S.A.
First Edition
Hardcover. Condition: Near Fine. No Jacket. 1st Edition. Some slight browning of pages, but otherwise in very good condition. Green leather front cover. VERY BRIGHT gilt lettering and emblem on front. BR (Box 186).
Published by Torreya Botanical Club, Menasha WI, Vol. 39 #2, 3 & 4 March-August 1939 & Vol. 40 #6 Nov.-Dec.1940, 4 volumes, PAPERBOUND, (G+),, 1940
Seller: Librarium, East Chatham, NY, U.S.A.
Torreya Botanical Club, Menasha WI, Vol. 39 #2, 3 & 4 March-August 1939 & Vol. 40 #6 Nov.-Dec.1940, 4 volumes, pages 29-134 and pages 185-236, index in Vol. 40, b&w illustrations and photos in Vol. 39, 6"x 9-1/8", grey PAPERBOUND, edges a bit yellowed, Vol. 39 # 4 has a 3/8" closed tear at top edge and a light water stain at top edge that runs through book but doesn't affect text or illustrations, some light cover creasing, contents clean & tight, books good+ (G+) 3300 [4Os108GD].
Language: English
Published by American Society For Metals, 1970
Seller: Thomas F. Pesce', Anaheim, CA, U.S.A.
Hardcover. Condition: Good. Dust Jacket Condition: Fair. Eigth Edition. Pages Are Clean And Tight.
Published by American Society for Metals, 1971
Seller: Novel Ideas Books & Gifts, Decatur, IL, U.S.A.
Hardcover. Condition: Very Good. Dust Jacket Condition: Very Good-. Eighth Edition. 4to 11" - 13" tall; 734 pages.
Condition: Fair. Acceptable condition. No Dust Jacket (metals, metalurgy, engineering, guides) A readable, intact copy that may have noticeable tears and wear to the spine. All pages of text are present, but they may include extensive notes and highlighting or be heavily stained. Includes reading copy only books. NOT AVAILABLE FOR SHIPMENT OUTSIDE OF THE UNITED STATES.
Published by American Society for Metals, 1969
Seller: BookDepart, Shepherdstown, WV, U.S.A.
Hardcover. Condition: UsedGood. Hardcover, 8th edition, Volume 4 only; prepared under direction of the ASM Handbook Committee; fading, light soiling, and edge wear to exterior; surplus library copy with the usual stampings; former owner's name written inside front cover; otherwise in good condition with clean text, firm binding. Dust jacket shows fading and shelf wear and is protected by a Mylar cover.
Published by American Society for Metals, 1977
Seller: HPB-Red, Dallas, TX, U.S.A.
hardcover. Condition: Good. Connecting readers with great books since 1972! Used textbooks may not include companion materials such as access codes, etc. May have some wear or writing/highlighting. We ship orders daily and Customer Service is our top priority!
Condition: Good. Good condition. Acceptable dust jacket. 8th edition. Volume 3. (metal-cutting, machine-shop practice, handbooks) A copy that has been read but remains intact. May contain markings such as bookplates, stamps, limited notes and highlighting, or a few light stains. Bundled media such as CDs, DVDs, floppy disks or access codes may not be included. NOT AVAILABLE FOR SHIPMENT OUTSIDE OF THE UNITED STATES.
Language: English
Published by Cleveland, The American Society for Metals, 1955
4°, Gebundene Ausgabe. Condition: Gut. 208 S. Ausgetragenes Bibliotheksexemplar. Blauer Einband mit goldgeprägter Schrift auf Buchrücken und Vorderdeckel. Einband berieben und leicht nachgedunkelt - guter Zustand. Schnitt und Seitenwerk recht hell und sauber. Mit zahlreichen s/w-Abbildungen. Dreispaltig. Insgesamt ein gut erhaltenes Exemplar. B03-04-02D Sprache: Englisch Gewicht in Gramm: 768.
Published by Novelty, Ohio: American Society for Metals, C1970, Later Printing, 1970
Seller: Virginia Martin, aka bookwitch, Concord, CA, U.S.A.
Condition: Very Good. Dust Jacket Condition: Very Good. Quarto, hardcover, fine in VG black dj. Discusses arc welding processes and application to low carbon steel; ard welding of various substances; resistance welding, flash and friction welding, electron beam welding, gas welding, brazing. Book.
Published by American Society for Metals
Seller: Hennessey + Ingalls, Los Angeles, CA, U.S.A.
Hardcover. Condition: Used - Very Good. Very nice clean, tight copy free of any marks. wrapped in complimentary Brodart dust jacket protector.
Published by American Society for Metals, 1970
Seller: BookDepart, Shepherdstown, WV, U.S.A.
Hardcover. Condition: UsedGood. Hardcover, 8th edition, Volume 6 only; prepared under direction of the ASM Handbook Committee; surplus library copy with the usual stampings; reference number taped to spine; fading, light soiling, and shelf wear to exterior; in good condition with clean text, firm binding.
Published by American Society for Metals, 1961
Seller: BookDepart, Shepherdstown, WV, U.S.A.
Hardcover. Condition: UsedAcceptable. Hardcover, 8th edition, Volume 1 only; prepared under direction of the ASM Handbook Committee; surplus library copy with the usual stampings; reference number taped to spine; fading, soiling, and edge wear to exterior; binding reinforced, and first two pages loose; in acceptable condition with clean text.
Published by American Society for Metals, Cleveland, Ohio, 1955
Seller: Lazy Letters Books, Market Rasen, United Kingdom
US$ 13.90
Quantity: 1 available
Add to basketHardcover. Condition: Good. No Jacket. Ex ICI Billingham Library with stamps and withdrawn annotation. Minor wear.
Published by American Society for Metals, Metals Park, Ohio, 1961
Seller: 4 THE WORLD RESOURCE DISTRIBUTORS, Springfield, MO, U.S.A.
Hardcover. Condition: Good. Eighth Edition. Volumes 1 and 2; Ex-Library; 4to 11" - 13" tall.