Published by Berlin, Springer., 2016
ISBN 10: 3662490552 ISBN 13: 9783662490556
Seller: Universitätsbuchhandlung Herta Hold GmbH, Berlin, Germany
VII, 123 p. Broschur. Versand aus Deutschland / We dispatch from Germany via Air Mail. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. Sprache: Deutsch.
Published by Berlin, Heidelberg, Springer Berlin Heidelberg., 2017
ISBN 10: 3662541122 ISBN 13: 9783662541128
Seller: Universitätsbuchhandlung Herta Hold GmbH, Berlin, Germany
XV, 233 S. Broschur. Versand aus Deutschland / We dispatch from Germany via Air Mail. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. Sprache: Deutsch.
Published by Springer Vieweg, 2020
ISBN 10: 3662597888 ISBN 13: 9783662597880
Seller: medimops, Berlin, Germany
Condition: very good. Gut/Very good: Buch bzw. Schutzumschlag mit wenigen Gebrauchsspuren an Einband, Schutzumschlag oder Seiten. / Describes a book or dust jacket that does show some signs of wear on either the binding, dust jacket or pages.
Published by Springer Vieweg, 2019
ISBN 10: 3662590573 ISBN 13: 9783662590577
Seller: ThriftBooks-Atlanta, AUSTELL, GA, U.S.A.
Paperback. Condition: Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less 1.3.
Published by Springer Vieweg, 2017
ISBN 10: 3662541122 ISBN 13: 9783662541128
Seller: booksXpress, Bayonne, NJ, U.S.A.
Soft Cover. Condition: new.
Published by Springer Vieweg, 2019
ISBN 10: 3662590573 ISBN 13: 9783662590577
Seller: booksXpress, Bayonne, NJ, U.S.A.
Soft Cover. Condition: new.
Published by Springer Vieweg, 2017
ISBN 10: 3662541122 ISBN 13: 9783662541128
Seller: Lucky's Textbooks, Dallas, TX, U.S.A.
Condition: New.
Published by Springer Vieweg, 2018
ISBN 10: 3662564629 ISBN 13: 9783662564622
Seller: GF Books, Inc., Hawthorne, CA, U.S.A.
Condition: Very Good. Book is in Used-VeryGood condition. Pages and cover are clean and intact. Used items may not include supplementary materials such as CDs or access codes. May show signs of minor shelf wear and contain very limited notes and highlighting. 0.62.
Published by Springer Vieweg, 2018
ISBN 10: 3662564629 ISBN 13: 9783662564622
Seller: booksXpress, Bayonne, NJ, U.S.A.
Soft Cover. Condition: new.
Published by Springer Vieweg, 2022
ISBN 10: 3662659239 ISBN 13: 9783662659236
Seller: GF Books, Inc., Hawthorne, CA, U.S.A.
Condition: New. Book is in NEW condition. 1.17.
Published by Springer Vieweg, 2017
ISBN 10: 3662541122 ISBN 13: 9783662541128
Seller: Ria Christie Collections, Uxbridge, United Kingdom
Condition: New. PRINT ON DEMAND Book; New; Fast Shipping from the UK. No. book.
Published by Springer Vieweg, 2019
ISBN 10: 3662590573 ISBN 13: 9783662590577
Seller: Lucky's Textbooks, Dallas, TX, U.S.A.
Condition: New.
Published by Springer Vieweg 2017-05, 2017
ISBN 10: 3662541122 ISBN 13: 9783662541128
Seller: Chiron Media, Wallingford, United Kingdom
PF. Condition: New.
Published by Springer Vieweg, 2018
ISBN 10: 3662564629 ISBN 13: 9783662564622
Seller: Lucky's Textbooks, Dallas, TX, U.S.A.
Condition: New.
Published by Springer Berlin Heidelberg Mai 2017, 2017
ISBN 10: 3662541122 ISBN 13: 9783662541128
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germany
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Dieses Buch zeigt Untersuchungen verschiedener Additive Manufacturing Technologien für den industriellen Einsatz. Aus Sicht der Produktentwicklung werden Aspekte zur Beeinflussung der Wertschöpfungskette, technische und wirtschaftliche Einflussfaktoren für die industrielle Anwendung sowie Konfektionierungs- und Nachbearbeitungsprozesse zur Verbesserung der Bauteilqualität spezifiziert. Zur Evaluation der Einsatzpotentiale werden weiterhin Methoden und Werkzeuge für die Bauteilgestaltung sowie zur Prozessanalyse und -optimierung dargestellt.Die Realisierung geänderter Gestaltungsziele, wie beispielsweise die Herstellung von Ultra-Leichtbau-Komponenten, wird ferner durch den Einsatz neuer Werkstoffe analysiert. Anhand diverser Fallstudien aus Forschung und Industrie werden aktuelle Einsatzgebiete des Additive Manufacturing dargestellt sowie künftige Entwicklungen für den Praxiseinsatz beschrieben. 252 pp. Deutsch.
Published by Springer Vieweg, 2019
ISBN 10: 3662590573 ISBN 13: 9783662590577
Seller: Ria Christie Collections, Uxbridge, United Kingdom
Condition: New. PRINT ON DEMAND Book; New; Fast Shipping from the UK. No. book.
Published by Springer Vieweg, 2018
ISBN 10: 3662564629 ISBN 13: 9783662564622
Seller: Book Deals, Tucson, AZ, U.S.A.
Condition: Very Good. Very Good condition. Shows only minor signs of wear, and very minimal markings inside (if any). 0.62.
Published by Springer Vieweg, 2018
ISBN 10: 3662564629 ISBN 13: 9783662564622
Seller: Book Deals, Tucson, AZ, U.S.A.
Condition: Fine. Like New condition. Great condition, but not exactly fully crisp. The book may have been opened and read, but there are no defects to the book, jacket or pages. 0.62.
Published by Springer Vieweg, 2018
ISBN 10: 3662564629 ISBN 13: 9783662564622
Seller: Books Unplugged, Amherst, NY, U.S.A.
Condition: Good. Buy with confidence! Book is in good condition with minor wear to the pages, binding, and minor marks within 0.62.
Published by Springer Vieweg 2019-12, 2019
ISBN 10: 3662590573 ISBN 13: 9783662590577
Seller: Chiron Media, Wallingford, United Kingdom
PF. Condition: New.
Published by Springer Vieweg 2018-08, 2018
ISBN 10: 3662564629 ISBN 13: 9783662564622
Seller: Chiron Media, Wallingford, United Kingdom
PF. Condition: New.
Published by Springer Vieweg, 2019
ISBN 10: 3662590573 ISBN 13: 9783662590577
Seller: Books Puddle, New York, NY, U.S.A.
Condition: New.
Published by Springer Vieweg, 2018
ISBN 10: 3662564629 ISBN 13: 9783662564622
Seller: Ria Christie Collections, Uxbridge, United Kingdom
Condition: New. PRINT ON DEMAND Book; New; Fast Shipping from the UK. No. book.
Published by Vieweg + Teubner Verlag, 2017
ISBN 10: 3662541122 ISBN 13: 9783662541128
Seller: Revaluation Books, Exeter, United Kingdom
Paperback. Condition: Brand New. 233 pages. German language. 9.50x6.75x0.75 inches. In Stock.
Published by Springer Berlin Heidelberg, 2017
ISBN 10: 3662541122 ISBN 13: 9783662541128
Seller: AHA-BUCH GmbH, Einbeck, Germany
Taschenbuch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - Dieses Buch zeigt Untersuchungen verschiedener Additive Manufacturing Technologien für den industriellen Einsatz. Aus Sicht der Produktentwicklung werden Aspekte zur Beeinflussung der Wertschöpfungskette, technische und wirtschaftliche Einflussfaktoren für die industrielle Anwendung sowie Konfektionierungs- und Nachbearbeitungsprozesse zur Verbesserung der Bauteilqualität spezifiziert. Zur Evaluation der Einsatzpotentiale werden weiterhin Methoden und Werkzeuge für die Bauteilgestaltung sowie zur Prozessanalyse und -optimierung dargestellt.Die Realisierung geänderter Gestaltungsziele, wie beispielsweise die Herstellung von Ultra-Leichtbau-Komponenten, wird ferner durch den Einsatz neuer Werkstoffe analysiert. Anhand diverser Fallstudien aus Forschung und Industrie werden aktuelle Einsatzgebiete des Additive Manufacturing dargestellt sowie künftige Entwicklungen für den Praxiseinsatz beschrieben.
Published by Springer Berlin Heidelberg Dez 2019, 2019
ISBN 10: 3662590573 ISBN 13: 9783662590577
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germany
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Das Buch beschreibt grundlegende Spezifikationen von Bauteilen und Prozessen, Methoden zur Abschätzung der Bauteileignung und Anwendung der Additiven Fertigung sowie zur Entwicklung von Konzepten und Entwürfen. Weiter werden die Konstruktion von Bauteilen, deren Gestaltung zur Sicherstellung funktionaler Anforderungen und der Herstellbarkeit sowie Methoden und Werkzeuge zur Bauteiloptimierung dargestellt.Es erfolgt die Beschreibung von Ansätzen zur rechnergestützten Simulation sowie physischen Validierung von Bauteilen und die Erprobung von Bauteilen und Materialien.Daraus abgeleitet werden Maßnahmen zur Sicherstellung von Qualitätsaspekten charakterisiert. Weiterhin werden die Integration von Additiven Fertigungsverfahren in bestehende Prozesse dargestellt sowie Maßnahmen zur Steigerung der Wertschöpfung abgeleitet. Die Inhalte werden vor dem Hintergrund zum Aufbau neuer Geschäftsmodelle diskutiert, sie wurden 2018 auf einem Workshop präsentiert und zwischen Experten aus Forschung und Industrie erörtert. 372 pp. Deutsch.
Published by Springer Berlin Heidelberg Mai 2016, 2016
ISBN 10: 3662490552 ISBN 13: 9783662490556
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germany
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Das vorliegende Buch zeigt einen Überblick über das breite Anwendungsfeld des Additive Manufacturing, mit dem Fokus auf den industriellen Einsatz unterschiedlicher Technologien. Nach der Beschreibung eines allgemeinen Grundverständnisses und der Einschätzung zur Nutzung von Additive Manufacturing Verfahren in der Produktentwicklung werden verschiedene Technologien hinsichtlich von Nachhaltigkeits-, Individualisierungs-, Qualifizierungs- und Gestaltungsaspekten analysiert. Dabei liegt der Fokus stets auf der Betrachtung der gesamten Prozesskette, vom Pre-Prozess über den In- und Post-Prozess bis hin zur Anwendung. Die abschließende Betrachtung von Sicherheitsmerkmalen des Additive Manufacturing resultiert in der Einschätzung zukünftiger Entwicklungen im Bereich des Additive Manufacturing. 132 pp. Deutsch.
Published by Springer, 2024
ISBN 10: 3662684624 ISBN 13: 9783662684627
Seller: GF Books, Inc., Hawthorne, CA, U.S.A.
Condition: Very Good. Book is in Used-VeryGood condition. Pages and cover are clean and intact. Used items may not include supplementary materials such as CDs or access codes. May show signs of minor shelf wear and contain very limited notes and highlighting. 1.01.
Published by Springer, 2024
ISBN 10: 3662684624 ISBN 13: 9783662684627
Seller: Book Deals, Tucson, AZ, U.S.A.
Condition: Fine. Like New condition. Great condition, but not exactly fully crisp. The book may have been opened and read, but there are no defects to the book, jacket or pages. 1.01.
Published by Springer, Berlin|Springer Berlin Heidelberg|Springer Vieweg, 2022
ISBN 10: 3662659239 ISBN 13: 9783662659236
Seller: moluna, Greven, Germany
Condition: New.