Advanced Manufacturing Processes Selected (46 results)
Language: English
Published by Cham, Springer., 2020
Series: Lecture Notes in Mechanical Engineering, Book 118 of 268. Book 118 of 268 - Lecture Notes in Mechanical Engineering
- Softcover
Seller: Universitätsbuchhandlung Herta Hold GmbH, Berlin, GermanyUniversitätsbuchhandlung Herta Hold GmbH
Contact seller4-star sellerCondition: Used
US$ 23.52
US$ 34.26 shippingShips from Germany to U.S.A.Quantity: 2 available
XIX, 629 p. Softcover. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. Lecture Notes in Mechanical Engineering. Sprache: Englisch.
- Softcover
Seller: Buchpark, Trebbin, GermanyBuchpark
Contact seller5-star sellerCondition: Used
US$ 100.94
US$ 119.91 shippingShips from Germany to U.S.A.Quantity: 1 available
Condition: Hervorragend. Zustand: Hervorragend | Seiten: 616 | Sprache: Englisch | Produktart: Bücher | This book offers a timely snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers various manufacturing processes, such as… grinding, boring, milling, broaching, coatings, including additive manufacturing. It focuses on cutting, abrasive, stamping-drawing processes, shot peening, and complex treatment. It describes temperature distribution, twisting deformation, defect formation process, failure analysis, as well as the convective heat exchange and non-uniform nanocapillary fluid cooling, highlighting the growing role of quality control, integrated management systems, and economic efficiency evaluation. It also covers vibration damping, dynamic behavior, failure probability, and strength performance methods for aviation, heterogeneous, permeable porous, and other types of materials. Gathering the best papers presented at the 4th Grabchenkös International Conference on Advanced Manufacturing Processes (InterPartner-2022), held in Odessa, Ukraine, on September 6¿9, 2022, this book offers a timely overview and extensive information on trends and technologies in manufacturing, mechanical, and materials engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and to offer a bridge between academic and industrial researchers.
Language: English
Published by Springer, 2020
Series: Lecture Notes in Mechanical Engineering, Book 118 of 268. Book 118 of 268 - Lecture Notes in Mechanical Engineering
- Softcover
Seller: Books Puddle, New York, NY, U.S.A.Books Puddle
Contact seller4-star sellerCondition: New
US$ 234.81
US$ 3.99 shippingShips within U.S.A.Quantity: 4 available
Condition: New. pp. 590.
More imagesLanguage: English
Published by Springer, 2020
Series: Lecture Notes in Mechanical Engineering, Book 118 of 268. Book 118 of 268 - Lecture Notes in Mechanical Engineering
- Softcover
Seller: preigu, Osnabrück, Germanypreigu
Contact seller5-star sellerCondition: New
US$ 164.67
US$ 79.94 shippingShips from Germany to U.S.A.Quantity: 5 available
Taschenbuch. Condition: Neu. Advanced Manufacturing Processes | Selected Papers from the Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2019), September 10-13, 2019, Odessa, Ukraine | Volodymyr Tonkonogyi (u. a.) | Taschenbuch | Lecture Notes in Mechanical Engineering | xix | Englisch | 2…020 | Springer | EAN 9783030407230 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
Language: English
Published by Springer International Publishing, 2020
Series: Lecture Notes in Mechanical Engineering, Book 118 of 268. Book 118 of 268 - Lecture Notes in Mechanical Engineering
- Softcover
Seller: AHA-BUCH GmbH, Einbeck, GermanyAHA-BUCH GmbH
Contact seller5-star sellerCondition: New
US$ 188.77
US$ 74.07 shippingShips from Germany to U.S.A.Quantity: 1 available
Taschenbuch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book offers a timely yet comprehensive snapshot of innovative research and developments in the area of manufacturing. It covers a wide range of manufacturing processes, such as cutting, coatings, and grinding, highlighting the advantages provi…ded by the use of new materials and composites, as well as new methods and technologies. It discusses topics in energy generation and pollution prevention. It shows how computational methods and mathematical models have been applied to solve a number of issues in both theoretical and applied research. Based on selected papers presented at the Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2019), held in Odessa, Ukraine on September 10-13, 2019, this book offers a timely overview and extensive information on trends and technologies in the area of manufacturing, mechanical and materials engineering. It is also intended to facilitate communication and collaboration between different groups working on similar topics, and to offer a bridge between academic and industrial researchers.
Language: English
Published by Springer, 2021
Series: Lecture Notes in Mechanical Engineering, Book 185 of 268. Book 185 of 268 - Lecture Notes in Mechanical Engineering
- Softcover
Seller: Ria Christie Collections, Uxbridge, United KingdomRia Christie Collections
Contact seller5-star sellerCondition: New
US$ 258.06
US$ 15.88 shippingShips from United Kingdom to U.S.A.Quantity: Over 20 available
Condition: New. In.
- Hardcover
Seller: Ria Christie Collections, Uxbridge, United KingdomRia Christie Collections
Contact seller5-star sellerCondition: New
US$ 258.06
US$ 15.88 shippingShips from United Kingdom to U.S.A.Quantity: Over 20 available
Condition: New. In.
- Softcover
Seller: Ria Christie Collections, Uxbridge, United KingdomRia Christie Collections
Contact seller5-star sellerCondition: New
US$ 258.06
US$ 15.88 shippingShips from United Kingdom to U.S.A.Quantity: Over 20 available
Condition: New. In.
- Hardcover
Seller: Books From California, Simi Valley, CA, U.S.A.Books From California
Contact seller4-star sellerCondition: Used - Good
US$ 264.93
US$ 4.99 shippingShips within U.S.A.Quantity: 1 available
hardcover. Condition: Good. cover warped minor wear and creasing.
Language: English
Published by Springer, 2020
Series: Lecture Notes in Mechanical Engineering, Book 118 of 268. Book 118 of 268 - Lecture Notes in Mechanical Engineering
- Softcover
Seller: Mispah books, Redhill, SURRE, United KingdomMispah books
Contact seller4-star sellerCondition: New
US$ 260.74
US$ 33.13 shippingShips from United Kingdom to U.S.A.Quantity: 1 available
Paperback. Condition: New. New. book.
- Softcover
Seller: California Books, Miami, FL, U.S.A.California Books
Contact seller4-star sellerCondition: New
US$ 295.00
Free ShippingShips within U.S.A.Quantity: Over 20 available
Condition: New.
Language: English
Published by Springer, 2021
Series: Lecture Notes in Mechanical Engineering, Book 185 of 268. Book 185 of 268 - Lecture Notes in Mechanical Engineering
- Softcover
Seller: preigu, Osnabrück, Germanypreigu
Contact seller5-star sellerCondition: New
US$ 217.43
US$ 79.94 shippingShips from Germany to U.S.A.Quantity: 5 available
Taschenbuch. Condition: Neu. Advanced Manufacturing Processes II | Selected Papers from the 2nd Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2020), September 8-11, 2020, Odessa, Ukraine | Volodymyr Tonkonogyi (u. a.) | Taschenbuch | Lecture Notes in Mechanical Engineering | xxiii | Engl…isch | 2021 | Springer | EAN 9783030680138 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
- Hardcover
Seller: Buchpark, Trebbin, GermanyBuchpark
Contact seller5-star sellerCondition: Used
US$ 180.62
US$ 119.91 shippingShips from Germany to U.S.A.Quantity: 2 available
Condition: Hervorragend. Zustand: Hervorragend | Seiten: 604 | Sprache: Englisch | Produktart: Bücher | This book offers a timely snapshot of innovative research and developments at the interface between design, manufacturing, materials, mechanical and process engineering, and quality assurance. It covers various manufacturing p…rocesses, such as grinding, milling, broaching, and gear machining, including additive manufacturing, vibrational-centrifugal strengthening, laser-ultrasonic surface hardening, and antifriction coatings. It focuses on computer and numerical simulation, mathematical and integrated process modeling, parametric synthesis, virtual prototyping, automatic control, design of manufacturing, mechanical and mechatronics systems. It describes innovative cutting and abrasive processes and combined technologies. It also covers the formation, strengthening, and thermomechanical rolling. It also investigates the temperature field behavior, thermal stability, wear resistance, and other processes of various materials. Gathering the best papers presented at the 5th GrabchenkösInternational Conference on Advanced Manufacturing Processes (InterPartner-2023), held on September 5¿8, 2023, in Odessa, Ukraine, this book provides a comprehensive and up-to-date examination of design, manufacturing, mechanical, materials, and process engineering, as well as quality assurance trends and technologies. Yet, it also aims at fostering international and interdisciplinary communication and collaborations, offering a bridge between the academic and industrial sector.
- Hardcover
Seller: Buchpark, Trebbin, GermanyBuchpark
Contact seller5-star sellerCondition: Used
US$ 203.31
US$ 119.91 shippingShips from Germany to U.S.A.Quantity: 1 available
Condition: Hervorragend. Zustand: Hervorragend | Seiten: 616 | Sprache: Englisch | Produktart: Bücher | This book offers a timely snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers various manufacturing processes, such as… grinding, boring, milling, broaching, coatings, including additive manufacturing. It focuses on cutting, abrasive, stamping-drawing processes, shot peening, and complex treatment. It describes temperature distribution, twisting deformation, defect formation process, failure analysis, as well as the convective heat exchange and non-uniform nanocapillary fluid cooling, highlighting the growing role of quality control, integrated management systems, and economic efficiency evaluation. It also covers vibration damping, dynamic behavior, failure probability, and strength performance methods for aviation, heterogeneous, permeable porous, and other types of materials. Gathering the best papers presented at the 4th Grabchenkös International Conference on Advanced Manufacturing Processes (InterPartner-2022), held in Odessa, Ukraine, on September 6¿9, 2022, this book offers a timely overview and extensive information on trends and technologies in manufacturing, mechanical, and materials engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and to offer a bridge between academic and industrial researchers.
- Softcover
Seller: AHA-BUCH GmbH, Einbeck, GermanyAHA-BUCH GmbH
Contact seller5-star sellerCondition: New
US$ 251.70
US$ 73.77 shippingShips from Germany to U.S.A.Quantity: 1 available
Taschenbuch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book offers a timely snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers various manufacturing processes, such as grinding, boring, mil…ling, broaching, coatings, including additive manufacturing. It focuses on cutting, abrasive, stamping-drawing processes, shot peening, and complex treatment. It describes temperature distribution, twisting deformation, defect formation process, failure analysis, as well as the convective heat exchange and non-uniform nanocapillary fluid cooling, highlighting the growing role of quality control, integrated management systems, and economic efficiency evaluation. It also covers vibration damping, dynamic behavior, failure probability, and strength performance methods for aviation, heterogeneous, permeable porous, and other types of materials. Gathering the best papers presented at the 4th Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2022), held in Odessa, Ukraine, on September 6-9, 2022, this book offers a timely overview and extensive information on trends and technologies in manufacturing, mechanical, and materials engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and to offer a bridge between academic and industrial researchers.
- Hardcover
Seller: AHA-BUCH GmbH, Einbeck, GermanyAHA-BUCH GmbH
Contact seller5-star sellerCondition: New
US$ 251.70
US$ 74.68 shippingShips from Germany to U.S.A.Quantity: 1 available
Buch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book offers a timely snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers various manufacturing processes, such as grinding, boring, milling, b…roaching, coatings, including additive manufacturing. It focuses on cutting, abrasive, stamping-drawing processes, shot peening, and complex treatment. It describes temperature distribution, twisting deformation, defect formation process, failure analysis, as well as the convective heat exchange and non-uniform nanocapillary fluid cooling, highlighting the growing role of quality control, integrated management systems, and economic efficiency evaluation. It also covers vibration damping, dynamic behavior, failure probability, and strength performance methods for aviation, heterogeneous, permeable porous, and other types of materials. Gathering the best papers presented at the 4th Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2022), held in Odessa, Ukraine, on September 6-9, 2022, this book offers a timely overview and extensive information on trends and technologies in manufacturing, mechanical, and materials engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and to offer a bridge between academic and industrial researchers.
Language: English
Published by Springer International Publishing, 2021
Series: Lecture Notes in Mechanical Engineering, Book 185 of 268. Book 185 of 268 - Lecture Notes in Mechanical Engineering
- Softcover
Seller: AHA-BUCH GmbH, Einbeck, GermanyAHA-BUCH GmbH
Contact seller5-star sellerCondition: New
US$ 251.70
US$ 75.97 shippingShips from Germany to U.S.A.Quantity: 1 available
Taschenbuch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book offers a timely yet comprehensive snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers a wide range of manufacturing processes, suc…h as cutting, grinding, assembly, and coatings, including ultrasonic treatment, molding, radial-isostatic compression, ionic-plasma deposition, volumetric vibration treatment, and wear resistance. It also highlights the advantages of augmented reality, RFID technology, reverse engineering, optimization, heat and mass transfer, energy management, quality inspection, and environmental impact. Based on selected papers presented at the Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2020), held in Odessa, Ukraine, on September 8-11, 2020, this book offers a timely overview and extensive information on trends and technologies in production planning, design engineering, advanced materials, machining processes, process engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and offer a bridge between academic and industrial researchers.
- Softcover
Seller: preigu, Osnabrück, Germanypreigu
Contact seller5-star sellerCondition: New
US$ 249.06
US$ 79.94 shippingShips from Germany to U.S.A.Quantity: 5 available
Taschenbuch. Condition: Neu. Advanced Manufacturing Processes VII | Selected Papers from the 7th Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2025), September 23-26, 2025, Kielce, Poland | Volodymyr Tonkonogyi (u. a.) | Taschenbuch | xvii | Englisch | 2026 | Springer | EAN 9783032149251… | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
- Softcover
Seller: Revaluation Books, Exeter, United KingdomRevaluation Books
Contact seller5-star sellerCondition: New
US$ 354.32
US$ 16.57 shippingShips from United Kingdom to U.S.A.Quantity: 2 available
Paperback. Condition: Brand New. 615 pages. 9.25x6.10x1.24 inches. In Stock.
- Softcover
Seller: Ria Christie Collections, Uxbridge, United KingdomRia Christie Collections
Contact seller5-star sellerCondition: New
US$ 355.92
US$ 15.88 shippingShips from United Kingdom to U.S.A.Quantity: Over 20 available
Condition: New. In.
- Hardcover
Seller: Ria Christie Collections, Uxbridge, United KingdomRia Christie Collections
Contact seller5-star sellerCondition: New
US$ 355.92
US$ 15.88 shippingShips from United Kingdom to U.S.A.Quantity: Over 20 available
Condition: New. In.
- Softcover
Seller: AHA-BUCH GmbH, Einbeck, GermanyAHA-BUCH GmbH
Contact seller5-star sellerCondition: New
US$ 289.45
US$ 74.94 shippingShips from Germany to U.S.A.Quantity: 2 available
Taschenbuch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book offers a timely snapshot of innovative research and developments at the interface between engineering design, manufacturing and quality assurance. It covers various manufacturing processes, such as grinding, turning, drilling, milling. It… highlights advances in additive manufacturing, surface hardening, and plasma electrolytic oxidation, as well as topics in diagnostics, maintenance, and assembly. It also focuses on optimization methods, mathematical modeling, and computer and numerical simulation for mechanical systems and manufacturing processes. In turn, chapters investigate the thermal parameters, mechanism of transition zone formation, corrosion resistance, and coating porosity of materials and alloys. Gathering the best papers presented at the 7th Grabchenko s International Conference on Advanced Manufacturing Processes (InterPartner-2025), held in Kielce, Poland, on September 23 26, 2025, this book provides a comprehensive report on trends in engineering design, manufacturing and materials engineering, covering quality assurance topics and smart technologies, alike. It also aims to foster international and interdisciplinary communication and cooperation, offering a bridge between the academic and industrial sectors.
- Hardcover
Seller: Revaluation Books, Exeter, United KingdomRevaluation Books
Contact seller5-star sellerCondition: New
US$ 356.79
US$ 19.88 shippingShips from United Kingdom to U.S.A.Quantity: 2 available
Hardcover. Condition: Brand New. 615 pages. 9.25x6.10x1.31 inches. In Stock.
Language: English
Published by Springer Nature, 2021
Series: Lecture Notes in Mechanical Engineering, Book 185 of 268. Book 185 of 268 - Lecture Notes in Mechanical Engineering
- Softcover
Seller: Revaluation Books, Exeter, United KingdomRevaluation Books
Contact seller5-star sellerCondition: New
US$ 359.15
US$ 19.88 shippingShips from United Kingdom to U.S.A.Quantity: 2 available
Paperback. Condition: Brand New. 880 pages. 9.25x6.10x1.74 inches. In Stock.
- Softcover
Seller: Books Puddle, New York, NY, U.S.A.Books Puddle
Contact seller4-star sellerCondition: New
US$ 371.06
US$ 3.99 shippingShips within U.S.A.Quantity: 4 available
Condition: New.
- Softcover
Seller: Revaluation Books, Exeter, United KingdomRevaluation Books
Contact seller5-star sellerCondition: New
US$ 403.68
US$ 19.88 shippingShips from United Kingdom to U.S.A.Quantity: 2 available
Paperback. Condition: Brand New. 752 pages. 6.14x1.51x9.21 inches. In Stock.
- Softcover
Seller: Buchpark, Trebbin, GermanyBuchpark
Contact seller5-star sellerCondition: Used - Fine
US$ 296.76
US$ 119.91 shippingShips from Germany to U.S.A.Quantity: 1 available
Condition: Sehr gut. Zustand: Sehr gut | Seiten: 740 | Sprache: Englisch | Produktart: Bücher | This book offers a timely snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers a wide range of manufacturing processes, such as… grinding, boring, milling, turning, woodworking, coatings, including additive manufacturing. It focuses on laser, ultrasonic, and combined laser¿ultrasonic hardening treatments, and dispersion hardening. It describes tribology and functional analysis of coatings, separation, purification and filtration processes, as well as ecological recirculation and electrohydraulic activation, highlighting the growing role of digital twins, optimization and lifecycle management methods, and quality inspection processes. It also covers cutting-edge heat and mass transfer technologies and energy management methods. Gathering the best papers presented at the 3rd Grabchenkös International Conference on Advanced Manufacturing Processes (InterPartner-2021), held in Odessa, Ukraine, on September 7¿10, 2021, this book offers a timely overview and extensive information on trends and technologies in manufacturing, mechanical, and materials engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and to offer a bridge between academic and industrial researchers.
- Softcover
Seller: preigu, Osnabrück, Germanypreigu
Contact seller5-star sellerCondition: New
US$ 354.57
US$ 79.94 shippingShips from Germany to U.S.A.Quantity: 5 available
Taschenbuch. Condition: Neu. Advanced Manufacturing Processes V | Selected Papers from the 5th Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2023), September 5-8, 2023, Odessa, Ukraine | Volodymyr Tonkonogyi (u. a.) | Taschenbuch | Lecture Notes in Mechanical Engineering | xviii | Englis…ch | 2024 | Springer | EAN 9783031427800 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
- Hardcover
Seller: Ria Christie Collections, Uxbridge, United KingdomRia Christie Collections
Contact seller5-star sellerCondition: New
US$ 425.82
US$ 15.88 shippingShips from United Kingdom to U.S.A.Quantity: Over 20 available
Condition: New. In English.
Language: English
Published by Springer International Publishing, 2021
Series: Lecture Notes in Mechanical Engineering, Book 251 of 268. Book 251 of 268 - Lecture Notes in Mechanical Engineering
- Hardcover
Seller: AHA-BUCH GmbH, Einbeck, GermanyAHA-BUCH GmbH
Contact seller5-star sellerCondition: New
US$ 377.56
US$ 75.72 shippingShips from Germany to U.S.A.Quantity: 1 available
Buch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book offers a timely snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers a wide range of manufacturing processes, such as grinding, boring, mi…lling, turning, woodworking, coatings, including additive manufacturing. It focuses on laser, ultrasonic, and combined laser-ultrasonic hardening treatments, and dispersion hardening. It describes tribology and functional analysis of coatings, separation, purification and filtration processes, as well as ecological recirculation and electrohydraulic activation, highlighting the growing role of digital twins, optimization and lifecycle management methods, and quality inspection processes. It also covers cutting-edge heat and mass transfer technologies and energy management methods. Gathering the best papers presented at the 3rd Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2021), held in Odessa, Ukraine, on September 7-10, 2021, this book offers a timely overview and extensive information on trends and technologies in manufacturing, mechanical, and materials engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and to offer a bridge between academic and industrial researchers.
