Published by Industrial Press, Inc., 1988
ISBN 10: 0831111747 ISBN 13: 9780831111748
Condition: Good. Good condition. A copy that has been read but remains intact. May contain markings such as bookplates, stamps, limited notes and highlighting, or a few light stains.
Published by Industrial Press, Inc. (edition ), 1988
ISBN 10: 0831111747 ISBN 13: 9780831111748
Seller: BooksRun, Philadelphia, PA, U.S.A.
Hardcover. Condition: Fair. Heavy wear. Ship within 24hrs. Satisfaction 100% guaranteed. APO/FPO addresses supported.
Published by Industrial Press, Inc., 1988
ISBN 10: 0831111747 ISBN 13: 9780831111748
Seller: St Vincent de Paul of Lane County, Eugene, OR, U.S.A.
Condition: Acceptable. hardcover 100% of proceeds go to charity! Acceptable reading copy with obvious signs of use, wear, and/or cosmetic issues. Item is complete and remains readable despite notable condition issues.
Published by Industrial Press, Inc., 1988
ISBN 10: 0831111747 ISBN 13: 9780831111748
Seller: Irish Booksellers, Portland, ME, U.S.A.
Condition: Good. SHIPS FROM USA. Used books have different signs of use and do not include supplemental materials such as CDs, Dvds, Access Codes, charts or any other extra material. All used books might have various degrees of writing, highliting and wear and tear and possibly be an ex-library with the usual stickers and stamps. Dust Jackets are not guaranteed and when still present, they will have various degrees of tear and damage. All images are Stock Photos, not of the actual item. book.
Published by Industrial Press, Inc., New York, New York, U.S.A., 1988
Seller: The Country Bookshop [Member VABA], Plainfield, VT, U.S.A.
Hard Cover. Condition: Very Good. Dust Jacket Condition: No Dust Jacket. Size: 8vo - over 7¾" - 9¾" tall.
Published by INDUSTRIAL PRESS, New York, New York * * * * *, 1988
ISBN 10: 0831111747 ISBN 13: 9780831111748
Seller: L. Michael, North Hollywood, CA, U.S.A.
First Edition
Hardcover. Condition: Near Fine. B00K: Near Fine/Fine/, 1988 (illustrator). 1st Edition. B00K: Near Fine/Fine/, $35.17 0831111747 BASIC MACHINING REFERENCE HANDBOOK * MEYERS, Arthur R.; SLATTERY, Thomas J. INDUSTRIAL PRESS 1988 New York, New York * * * * * 1sT Edition, 2nD Printing H/c Brown Spine, With Title In 0ff~White Hard Cover B00K: Near Fine/Fine/, Slight Shelf, Edge And Corner Wear. 281 Numbered Pages Printed On 0ff~White Paper, In Fine/ Condition. Removable Supplemental Bar Code Sticker, Bottom Rear Cover. D/j: None. = No Odors, No Other Writing, No Names, No Rippling, Not Stuck Together, No Book Plate, Not X~Library, No Remainder Or Other Marks. Description Applies To This B00K, Only. = This B00K Is Hard To Find, Will Be Packaged And Shipped = Carefully, To Avoid Shipping Damage And Will Make It, An Excellent Addition To Your Own Personal Library Collection, Or As A Gift, For The Discriminating Reader / Collector. = WORLD WIDE SHIPPING, AVAILABLE *.
Published by Industrial Press, Inc. (edition 2), 2001
ISBN 10: 0831131209 ISBN 13: 9780831131203
Seller: BooksRun, Philadelphia, PA, U.S.A.
Paperback. Condition: Very Good. 2. Ship within 24hrs. Satisfaction 100% guaranteed. APO/FPO addresses supported.
Published by Industrial Press, Inc., 2001
ISBN 10: 0831131209 ISBN 13: 9780831131203
Seller: SecondSale, Montgomery, IL, U.S.A.
Condition: Good. Item in very good condition! Textbooks may not include supplemental items i.e. CDs, access codes etc.
Published by Industrial Press, Inc., 2001
ISBN 10: 0831131209 ISBN 13: 9780831131203
Seller: SecondSale, Montgomery, IL, U.S.A.
Condition: Very Good. Item in very good condition! Textbooks may not include supplemental items i.e. CDs, access codes etc.
Published by Industrial Press, 2001
ISBN 10: 0831131209 ISBN 13: 9780831131203
Seller: ThriftBooks-Atlanta, AUSTELL, GA, U.S.A.
Paperback. Condition: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less 1.45.
Published by Industrial Press, Incorporated, 2001
ISBN 10: 0831131209 ISBN 13: 9780831131203
Seller: Better World Books, Mishawaka, IN, U.S.A.
Condition: Very Good. Used book that is in excellent condition. May show signs of wear or have minor defects.
Published by Industrial Press, Inc., 1988
ISBN 10: 0831111747 ISBN 13: 9780831111748
Seller: Book Deals, Tucson, AZ, U.S.A.
Condition: Good. Good condition. This is the average used book, that has all pages or leaves present, but may include writing. Book may be ex-library with stamps and stickers. 1.46.
Published by Industrial Press, Inc., 1988
ISBN 10: 0831111747 ISBN 13: 9780831111748
Seller: GF Books, Inc., Hawthorne, CA, U.S.A.
Condition: Very Good. Book is in Used-VeryGood condition. Pages and cover are clean and intact. Used items may not include supplementary materials such as CDs or access codes. May show signs of minor shelf wear and contain very limited notes and highlighting. 1.46.
Published by New York, New York, U.S.A.: Industrial Pr, 1988
ISBN 10: 0831111747 ISBN 13: 9780831111748
Seller: Bingo Used Books, Vancouver, WA, U.S.A.
Hardcover. Condition: Very Good. hardback in very good condition. name on first blank page.
Published by Industrial Press, Inc., 2001
ISBN 10: 0831131209 ISBN 13: 9780831131203
Seller: Goodwill of Silicon Valley, SAN JOSE, CA, U.S.A.
Condition: very_good. Supports Goodwill of Silicon Valley job training programs. The cover and pages are in very good condition! The cover and any other included accessories are also in very good condition showing some minor use. The spine is straight, there are no rips tears or creases on the cover or the pages.
Published by Industrial Press, Incorporated, 2001
ISBN 10: 0831131209 ISBN 13: 9780831131203
Seller: Better World Books Ltd, Dunfermline, United Kingdom
Condition: Very Good. Ships from the UK. Former library book; may include library markings. Used book that is in excellent condition. May show signs of wear or have minor defects.
Published by Industrial Press, Inc., 1988
ISBN 10: 0831111747 ISBN 13: 9780831111748
Seller: Librairie Parrêsia, Figeac, France
Condition: Used: Very Good. Basic Machining Reference Handbook | A.R. Meyers/T.J. Slattery | Industrial Press, 1988, in-8 cartonnage éditeur, 281 pages. Couverture propre. Dos solide. Intérieur frais. Exemplaire de bibliothèque : petit code barre en pied de 1re de couv., cotation au dos, rares et discrets petits tampons à l'intérieur de l'ouvrage. Bel état ! [BT37].
Published by Industrial Press, Inc., 2001
ISBN 10: 0831131209 ISBN 13: 9780831131203
Seller: Ergodebooks, Houston, TX, U.S.A.
Softcover. Condition: Good. Second. Includes expanded chapters on numerical control and computerized operations. Contains additional speeds and feeds tables, general troubleshooting concepts, and a basic review of relevant computer terms and applications. Emphasizes the hands-on concept of developing and refining skills, along with knowledge of metals and machining processes by means of application. Offers tips on checking material hardness, ensuring that temperature variations won't put parts out of tolerance. Reviews and presents metals and heat-treating with emphasis on aspects most important to machining. Presents checklists containing considerations involved, the steps and functions required, and the most appropriate sequences. Includes a checklist of stock and the steps involved, along with a review of both basic machining steps and the axes and other factors pertinent to N/C control and operation needed to complete the program.A comprehensive, yet easy-to-use memory jog for experienced machinists, as well as a reference for programmers and anyone else with an interest in machining processes.
Published by New York, New York, U.S.A.: Industrial Pr, 1988
ISBN 10: 0831111747 ISBN 13: 9780831111748
Seller: Bingo Books 2, Vancouver, WA, U.S.A.
Hardcover. Condition: Near Fine. hardback book in near fine condition.
Published by Industrial Press, Inc., 1988
ISBN 10: 0831111747 ISBN 13: 9780831111748
Seller: GoldenWavesOfBooks, Fayetteville, TX, U.S.A.
Hardcover. Condition: new. New. Fast Shipping and good customer service.
Published by Industrial Press, Inc., 2001
ISBN 10: 0831131209 ISBN 13: 9780831131203
Seller: GoldBooks, Denver, CO, U.S.A.
Paperback. Condition: very good. Very Good Copy. Customer Service Guaranteed.
Published by Industrial Press, Inc., 1988
ISBN 10: 0831111747 ISBN 13: 9780831111748
Seller: Romtrade Corp., STERLING HEIGHTS, MI, U.S.A.
Condition: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.
Published by Industrial Press, Inc., 1988
ISBN 10: 0831111747 ISBN 13: 9780831111748
Seller: Basi6 International, Irving, TX, U.S.A.
Condition: Brand New. New. US edition. Expediting shipping for all USA and Europe orders excluding PO Box. Excellent Customer Service.
Published by Industrial Press, Inc., 2001
ISBN 10: 0831131209 ISBN 13: 9780831131203
Seller: GoldenWavesOfBooks, Fayetteville, TX, U.S.A.
Paperback. Condition: new. New. Fast Shipping and good customer service.
Published by Industrial Press, Inc., 2001
ISBN 10: 0831131209 ISBN 13: 9780831131203
Seller: Campbell Bookstore, Austin, TX, U.S.A.
Condition: new.
Published by Industrial Press, Inc., 2001
ISBN 10: 0831131209 ISBN 13: 9780831131203
Seller: Wizard Books, Long Beach, CA, U.S.A.
Paperback. Condition: new. New.
Published by Industrial Press, Inc., 1988
ISBN 10: 0831111747 ISBN 13: 9780831111748
Seller: Books Unplugged, Amherst, NY, U.S.A.
Condition: New. Buy with confidence! Book is in new, never-used condition 1.46.
Published by Industrial Press, Incorporated, 1988
ISBN 10: 0831111747 ISBN 13: 9780831111748
Seller: Books Puddle, New York, NY, U.S.A.
Condition: New. pp. 281.
Published by Industrial Press, Inc., 2001
ISBN 10: 0831131209 ISBN 13: 9780831131203
Seller: GoldBooks, Denver, CO, U.S.A.
Paperback. Condition: new. New Copy. Customer Service Guaranteed.
Published by Industrial Press 7/16/2010, 2010
ISBN 10: 0831131209 ISBN 13: 9780831131203
Seller: BargainBookStores, Grand Rapids, MI, U.S.A.
Paperback or Softback. Condition: New. Basic Machining Reference Handbook 1.41. Book.