Published by Springer, 2012
ISBN 10: 1461374162 ISBN 13: 9781461374169
Seller: booksXpress, Bayonne, NJ, U.S.A.
Soft Cover. Condition: new.
Published by Springer, 2012
ISBN 10: 1461374162 ISBN 13: 9781461374169
Seller: Lucky's Textbooks, Dallas, TX, U.S.A.
Condition: New.
Published by Springer, 2012
ISBN 10: 1461374170 ISBN 13: 9781461374176
Seller: Lucky's Textbooks, Dallas, TX, U.S.A.
Condition: New.
Published by Springer, 2012
ISBN 10: 1461374170 ISBN 13: 9781461374176
Seller: California Books, Miami, FL, U.S.A.
Condition: New.
Published by Springer, 2012
ISBN 10: 1461374170 ISBN 13: 9781461374176
Seller: Ria Christie Collections, Uxbridge, United Kingdom
Condition: New. PRINT ON DEMAND Book; New; Fast Shipping from the UK. No. book.
Published by Springer, 2012
ISBN 10: 1461374162 ISBN 13: 9781461374169
Seller: Ria Christie Collections, Uxbridge, United Kingdom
Condition: New. PRINT ON DEMAND Book; New; Fast Shipping from the UK. No. book.
Published by Springer-Verlag New York Inc., 2012
ISBN 10: 1461374162 ISBN 13: 9781461374169
Seller: THE SAINT BOOKSTORE, Southport, United Kingdom
Paperback / softback. Condition: New. This item is printed on demand. New copy - Usually dispatched within 5-9 working days.
Published by Springer-Verlag New York Inc., 2012
ISBN 10: 1461374170 ISBN 13: 9781461374176
Seller: THE SAINT BOOKSTORE, Southport, United Kingdom
Paperback / softback. Condition: New. This item is printed on demand. New copy - Usually dispatched within 5-9 working days.
Published by Springer, 1999
ISBN 10: 0412819104 ISBN 13: 9780412819100
Seller: Studibuch, Stuttgart, Germany
hardcover. Condition: Sehr gut. 430 Seiten; 9780412819100.2 Sprache: Deutsch Gewicht in Gramm: 1.
Published by Springer, 1999
ISBN 10: 0412819201 ISBN 13: 9780412819209
Seller: Studibuch, Stuttgart, Germany
hardcover. Condition: Sehr gut. 671 Seiten; 9780412819209.2 Sprache: Deutsch Gewicht in Gramm: 2.
Published by Springer, 2012
ISBN 10: 1461374162 ISBN 13: 9781461374169
Seller: Revaluation Books, Exeter, United Kingdom
Paperback. Condition: Brand New. 442 pages. 9.25x6.10x1.01 inches. In Stock.
Published by Chapman & Hall, 1998
ISBN 10: 0412825902 ISBN 13: 9780412825903
Seller: killarneybooks, Inagh, CLARE, Ireland
Hardcover. Condition: Very Good. Hardcover, xii + 430 pages, NOT ex-library. Limited gentle signs of wear, book is clean and bright with unmarked text, free of inscriptions and stamps. Firm secure binding. Boards show moderate shelfwear. Published without a dust jacket. --- This handbook provides in a single publication a state-of the-art reference work which covers the major industrial lasers, systems, processes and applications in common use today. The text covers the curriculum of the Eurolaser Academy as presented by a team of leading experts in these fields. The material has been used for several years on the month-long international summer schools supported by the Commission of the European Union and during that period has been constantly upgraded and refined. Contents: 1 Basic Laser Mechanisms 2 Optics, Resonators and Beams 3 Carbon Dioxide Lasers 4 Solid State Lasers 5 Excimer Lasers 6 Semiconductor Lasers 7 Safety 8 Beam Manipulation.
Published by Springer 2012-11, 2012
ISBN 10: 1461374162 ISBN 13: 9781461374169
Seller: Chiron Media, Wallingford, United Kingdom
PF. Condition: New.
Published by Springer US, 2012
ISBN 10: 1461374162 ISBN 13: 9781461374169
Seller: AHA-BUCH GmbH, Einbeck, Germany
Taschenbuch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - The European Community regards training as a priority area and has therefore developed a series of programmes in the field of vocational training. This book is the result of a pilot project selected under two of these Community Action Programmes. It was initially selected under the COMETT programme, concerned with the development of continuing vocational training in the European Community. Moreover, it was one of the few selected projects to receive further funding under a second selection in the context of the LEONARDO DA VINCI Action Programme for the implementation of a European Community Vocational Training policy. It is with great pleasure that I present the outcome of this project which embodies one of the fundamental objectives of the LEONARDO DA VINCI Programme -training for new technologies in SMEs, which make a significant contribution to economic development in Europe. K DRAXLER Director Directorate General XXII European Commission x Acknowledgements The Volume Editor gratefully acknowledges funding by the LEONARDO DA VINCI Programme of the Commission of the European Community and by the Austrian Federal Ministry of Science and Transport whose financial support has made the EuroLaser Academy a reality and has led directly to the generation ofthis handbook. He is also indebted to Director Dr. Klaus Draxler, Head of the LEONARDO DA VINCI Programme, DG XXII of the Commission of the European Community, moreover to Director General Raul Kneucker, Minister's Advisor Helmut Schacher and Mrs. Friederike Pranckl-Kloepfer from the Austrian Federal Ministry of Science and Transport.
Published by Springer US, 2012
ISBN 10: 1461374170 ISBN 13: 9781461374176
Seller: AHA-BUCH GmbH, Einbeck, Germany
Taschenbuch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - If in some processes oxygen is used, additional energy is provided at a rate P ch by chemical reactions. The flow of energy per unit time can then be written: (1. 2) From the above it can be made clear that it is the rate of energy fluxes, i. e. 2 intensities [J/ms] that determines into which channel the energy goes and how the interaction zone will be modified in its state (solid, liquid, gaseous) and geometrical shape (plane, dip, deep hole) -in other words which kind of treatment process will be established (hardening, welding, drilling etc. ). In the following, it will be shown that, in fact, it is the intensity of the beam, which together with the interaction time, primarily governs the interaction phenomena. 1. 1. 2 Laser beam properties determining interaction and energy coupling etJeets In order to yield an efficient process, it is necessary to obtain adequate intensity at the workpiece and to couple a fraction of the incident power as high as possible into the material. The beam properties being of importance in this respect are, (Hugel, 1992): 1. the wavelength A. , governing, in principle, the focusability and absorptivity; 2. the polarisation, having considerable influence on the absorptivity for large angles of incidence; 3. the power P which together with the achievable spot diameter d L f determines the intensity in the interaction zone; 4.
Published by Springer, 1999
ISBN 10: 0412819201 ISBN 13: 9780412819209
Seller: Ria Christie Collections, Uxbridge, United Kingdom
Condition: New. PRINT ON DEMAND Book; New; Fast Shipping from the UK. No. book.
Published by Springer, 1999
ISBN 10: 0412819104 ISBN 13: 9780412819100
Seller: Ria Christie Collections, Uxbridge, United Kingdom
Condition: New. PRINT ON DEMAND Book; New; Fast Shipping from the UK. No. book.
Published by Springer Us Dez 1999, 1999
ISBN 10: 0412819104 ISBN 13: 9780412819100
Seller: AHA-BUCH GmbH, Einbeck, Germany
Buch. Condition: Neu. Neuware - 1 Basic Laser Mechanisms.- 2 Optics, Resonators and Beams.- 3 Carbon Dioxide Lasers.- 4 Solid State Lasers.- 5 Excimer Lasers.- 6 Semiconductor Lasers.- 7 Safety.- 8 Beam Manipulation.
Published by Springer Us Dez 1999, 1999
ISBN 10: 0412819201 ISBN 13: 9780412819209
Seller: AHA-BUCH GmbH, Einbeck, Germany
Buch. Condition: Neu. Neuware - 1 Interaction Phenomena.- 1.1 Introduction.- 1.2 Energy coupling.- 1.3 Interaction phenomena.- 1.4 Significance of coupling and interaction phenomena in laser treatment processes.- 1.5 References.- 2 Materials and Workpiece Classification.- 2.1 General aspects.- 2.2 Crystalline materials.- 2.3 Material classes and their properties.- 2.4 Laser treatment.- 2.5 Testing of materials.- 2.6 Seam geometry workpiece classification.- 2.7 Technological considerations.- 2.8 References.- 3 Cutting.- 3.1 Introduction.- 3.2 Process characteristics, advantages, disadvantages.- 3.3 Principles and theory in laser cutting.- 3.4 Productivity and obtainable cut qualities.- 3.5 Processing parameters.- 3.6 Safety in laser cutting.- 3.7 System types.- 3.8 Industrial applications.- 3.9 References.- 4 Welding.- 4.1 Introduction.- 4.2 Heat sources produced by laser beams.- 4.3 Behaviour of materials during laser welding.- 4.4 Engineering applications.- 4.5 Parameters to consider in the economic analysis of laser welding.- 4.6 References.- 5 Heat Treatment.- 5.1 Introduction.- 5.2. Process systematic of laser surface treatments.- 5.3 Conclusions and final remarks.- 5.4 Acknowledgements.- 5.5 References.- 6 Forming and Rapid Prototyping.- 6.1 The laser forming process.- 6.2 Process simulation.- 6.3 Applications and similar processes.- 6.4 List of variables.- 6.5 References.- 7 Marking and Scribing.- 7.1 Introduction.- 7.2 Marking methods.- 7.3 Systems.- 7.4 Economic aspects.- 7.5 References.- 8 Precision Ablation Processing.- 8.1 Introduction.- 8.2 Ablation mechanisms.- 8.3 Material interactions and applications.- 8.4 Laser ablation systems.- 8.5 Economical aspects.- 8.6 References.- 8.7 List of symbols.- 9 Drilling.- 9.1 Introduction.- 9.2 Mechanisms, models and techniques.- 9.3 Applications in the gas turbine industry.- 9.4 Other applications.- 9.5 References.- 10 Economics.- 10.1 Introduction.- 10.2 The laser process in perspective.- 10.3 Economic factors.- 10.4 Assessment methods.- 10.5 Case studies.- 10.6 Summary.- 10.7 Further reading.- 11 Assessment of Technology.- 11.1 Assessment of laser technology.- 11.2 Competing technologies.- 11.3 Assessment of laser machines.- 11.4 Test methods for laser systems.- 11.5 Quality evaluation of laser processed components.- 11.6 Basic economic considerations.- 11.7 References.- 12 Modelling.- 12.1 Basic equations and techniques.- 12.2 Analytical models.- 12.3 Numerical solutions.- 12.4 Semi quantitative models.- 12.5 References.
Published by Springer, 1998
ISBN 10: 0412825902 ISBN 13: 9780412825903
Seller: booksXpress, Bayonne, NJ, U.S.A.
Hardcover. Condition: new.
Published by Springer, 2013
ISBN 10: 1475753853 ISBN 13: 9781475753851
Seller: GreatBookPrices, Columbia, MD, U.S.A.
Condition: New.
Published by Springer, 1998
ISBN 10: 0412825902 ISBN 13: 9780412825903
Seller: Lucky's Textbooks, Dallas, TX, U.S.A.
Condition: New.
Published by Springer, 2013
ISBN 10: 1475753853 ISBN 13: 9781475753851
Seller: Lucky's Textbooks, Dallas, TX, U.S.A.
Condition: New.
Published by Springer, 2013
ISBN 10: 1475753853 ISBN 13: 9781475753851
Seller: Ria Christie Collections, Uxbridge, United Kingdom
Condition: New. PRINT ON DEMAND Book; New; Fast Shipping from the UK. No. book.
Published by Springer, 1998
ISBN 10: 0412825902 ISBN 13: 9780412825903
Seller: Ria Christie Collections, Uxbridge, United Kingdom
Condition: New. PRINT ON DEMAND Book; New; Fast Shipping from the UK. No. book.
Published by Springer, 2013
ISBN 10: 1475753853 ISBN 13: 9781475753851
Seller: GreatBookPricesUK, Castle Donington, DERBY, United Kingdom
Condition: New.
Published by Springer, 2013
ISBN 10: 1475753853 ISBN 13: 9781475753851
Seller: booksXpress, Bayonne, NJ, U.S.A.
Soft Cover. Condition: new.
Published by Springer, 2013
ISBN 10: 1475753853 ISBN 13: 9781475753851
Seller: GreatBookPrices, Columbia, MD, U.S.A.
Condition: As New. Unread book in perfect condition.
Published by Springer US, 2013
ISBN 10: 1475753853 ISBN 13: 9781475753851
Seller: AHA-BUCH GmbH, Einbeck, Germany
Taschenbuch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - The European Community regards training as a priority area and has therefore developed a series of programmes in the field of vocational training. This book is the result of a pilot project selected under two of these Community Action Programmes. It was initially selected under the COMETT programme, concerned with the development of continuing vocational training in the European Community. Moreover, it was one of the few selected projects to receive further funding under a second selection in the context of the LEONARDO DA VINCI Action Programme for the implementation of a European Community Vocational Training policy. It is with great pleasure that I present the outcome of this project which embodies one of the fundamental objectives of the LEONARDO DA VINCI Programme - training for new technologies in SMEs, which make a significant contribution to economic development in Europe. - K DRAXLER, Director Directorate General XXII European Commission.
Published by Springer, 2013
ISBN 10: 1475753853 ISBN 13: 9781475753851
Seller: GreatBookPricesUK, Castle Donington, DERBY, United Kingdom
Condition: As New. Unread book in perfect condition.