Modification Polymer Properties (29 results)
- Softcover
Seller: PBShop.store UK, Fairford, GLOS, United KingdomPBShop.store UK
Contact seller5-star sellerCondition: New
US$ 37.84
US$ 7.83 shippingShips from United Kingdom to U.S.A.Quantity: Over 20 available
PAP. Condition: New. New Book. Shipped from UK. Established seller since 2000.
- Softcover
Seller: Mispah books, Redhill, SURRE, United KingdomMispah books
Contact seller4-star sellerCondition: Used - As new
US$ 152.59
US$ 33.37 shippingShips from United Kingdom to U.S.A.Quantity: 1 available
paperback. Condition: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.
Language: English
Published by William Andrew 2016-09-12, 2016
Series: Plastics Design Library, Book 81 of 128. Book 81 of 128 - Plastics Design Library
- Hardcover
Seller: Chiron Media, Wallingford, United KingdomChiron Media
Contact seller5-star sellerCondition: New
US$ 203.48
US$ 20.67 shippingShips from United Kingdom to U.S.A.Quantity: Over 20 available
Hardcover. Condition: New.
Language: English
Published by William Andrew, 2016
Series: Plastics Design Library, Book 81 of 128. Book 81 of 128 - Plastics Design Library
- Hardcover
Seller: Majestic Books, Hounslow, United KingdomMajestic Books
Contact seller4-star sellerCondition: New
US$ 223.72
US$ 8.68 shippingShips from United Kingdom to U.S.A.Quantity: 3 available
Condition: New.
Language: English
Published by William Andrew, 2016
Series: Plastics Design Library, Book 81 of 128. Book 81 of 128 - Plastics Design Library
- Hardcover
Seller: Books Puddle, New York, NY, U.S.A.Books Puddle
Contact seller4-star sellerCondition: New
US$ 243.64
US$ 3.99 shippingShips within U.S.A.Quantity: 3 available
Condition: New.
Language: English
Published by William Andrew, 2016
Series: Plastics Design Library, Book 81 of 128. Book 81 of 128 - Plastics Design Library
- Hardcover
Seller: Biblios, frankfurt am main, HESSE, GermanyBiblios
Contact seller4-star sellerCondition: New
US$ 269.09
US$ 11.34 shippingShips from Germany to U.S.A.Quantity: 3 available
Condition: New.
Language: English
Published by William Andrew, 2016
Series: Plastics Design Library, Book 81 of 128. Book 81 of 128 - Plastics Design Library
- Hardcover
Seller: GreatBookPricesUK, Woodford Green, United KingdomGreatBookPricesUK
Contact seller5-star sellerCondition: New
US$ 266.78
US$ 20.02 shippingShips from United Kingdom to U.S.A.Quantity: Over 20 available
Condition: New.
Language: English
Published by William Andrew, 2016
Series: Plastics Design Library, Book 81 of 128. Book 81 of 128 - Plastics Design Library
- Hardcover
Seller: GreatBookPrices, Columbia, MD, U.S.A.GreatBookPrices
Contact seller5-star sellerCondition: New
US$ 277.78
US$ 2.64 shippingShips within U.S.A.Quantity: Over 20 available
Condition: New.
Language: English
Published by William Andrew, 2016
Series: Plastics Design Library, Book 81 of 128. Book 81 of 128 - Plastics Design Library
- Hardcover
Seller: Ria Christie Collections, Uxbridge, United KingdomRia Christie Collections
Contact seller5-star sellerCondition: New
US$ 280.47
US$ 15.99 shippingShips from United Kingdom to U.S.A.Quantity: Over 20 available
Condition: New. In.
Language: English
Published by William Andrew, 2016
Series: Plastics Design Library, Book 81 of 128. Book 81 of 128 - Plastics Design Library
- Hardcover
Seller: GreatBookPrices, Columbia, MD, U.S.A.GreatBookPrices
Contact seller5-star sellerCondition: Used - As new
US$ 303.38
US$ 2.64 shippingShips within U.S.A.Quantity: Over 20 available
Condition: As New. Unread book in perfect condition.
Language: English
Published by William Andrew, 2016
Series: Plastics Design Library, Book 81 of 128. Book 81 of 128 - Plastics Design Library
- Hardcover
Seller: GreatBookPricesUK, Woodford Green, United KingdomGreatBookPricesUK
Contact seller5-star sellerCondition: Used - As new
US$ 311.58
US$ 20.02 shippingShips from United Kingdom to U.S.A.Quantity: Over 20 available
Condition: As New. Unread book in perfect condition.
Language: English
Published by Elsevier Science & Technology Sep 2016, 2016
Series: Plastics Design Library, Book 81 of 128. Book 81 of 128 - Plastics Design Library
- Hardcover
Seller: AHA-BUCH GmbH, Einbeck, GermanyAHA-BUCH GmbH
Contact seller5-star sellerCondition: New
US$ 469.42
US$ 73.73 shippingShips from Germany to U.S.A.Quantity: 2 available
Buch. Condition: Neu. Neuware.
- Softcover
- Print on Demand
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, GermanyBuchWeltWeit Ludwig Meier e.K.
Contact seller5-star sellerCondition: New
US$ 21.49
US$ 26.22 shippingShips from Germany to U.S.A.Quantity: 2 available
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The study investigated the influences of wood modification on the properties of Polyvinyl chloride (PVC) based Wood Polymer Composites (WPC). Various ethanolamines, L-arginine, pre-hydrolyzed and monomeric aminosilane, melamine and…acetic anhydride treatment were used to improve the adhesion between wood and polymer as well as water absorption behavior and resistance to basidiomycetes. Amine based treatments were chosen to change the nature of wood from acidic to basic in order to increase the compatibility with the acidic polymer. Treated and untreated wood flour, PVC and additives were dry blended in a mixer. The dry blend was compounded to granulate by counter-rotating twin screw extrusion and compression moulded into panels using a hydraulic press. Elemental analysis (nitrogen content) via gas chromatography showed expected fixation of aminosilane and melamine treatment. The nitrogen fixation of ethanolamine and L-arginine treated material were obviously reduced, whereas the amount and reactivity of the aminogroups influenced the fixation behavior. With increasing content of amino-groups and reactivity, the fixation was improved. Fourier transform infrared (FTIR) analyses revealed interactions between monoethanolamine and cell wall components. The amine based treatments changed the nature of wood from acidic to basic. An improvement of the interphase was detected via mechanical property testing. Tensile strength, elongation at break and unnotched impact strength of the composite were obviously increased by Larginine, ethanolamine and aminosilane treatments. It has to be considered that amine based treatments (monoethanolamine in this study) led to reduced thermal stability of the composite. Thermogravimetric analysis showed a decrease of onset temperature with increasing monoethanolamine content. Water repellence of the composite was improved by melamine, pre-hydrolyzed aminosilane and acetic acid treatment. Treated and untreated composites revealed high resistance against basidiomycetes. Due to the low initial moisture content and low weight loss of untreated and treated composites, no effect of the various modifications was distinguished. 88 pp. Englisch.
- Softcover
- Print on Demand
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, GermanyBuchWeltWeit Ludwig Meier e.K.
Contact seller5-star sellerCondition: New
US$ 37.17
US$ 26.22 shippingShips from Germany to U.S.A.Quantity: 2 available
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Wood Polymer Composites are a new group of hybrid materials, which combine the advantagesof synthetic polymers such as polyolefines and natural polymers such as wood; whereas the synthetic polymer is used as matrix material and the…wood as reinforcement material or filler. As matrix material, principally every thermoplastic polymer with a processing temperature below 200°C can be used due to the temperature sensivity of wood. Wood Polymer Composites are processed typically with processing technologies from the plastic industry such as extrusion and injection molding. The present study was conducted to explore the possibility of wood particle modification with different types of silanes. It was the aim to contribute the silanes as compatibilizers or coupling agent and therefore improve the mechanical properties and the resistance against water. Norway spruce (Picea abies) as representative wood species was used in three different particle types. The size distribution for the wood particles ranges from 70-2500 µm. Four commercial available silanes with various functional groups (amino, di-amino, alkyl) were used as modification agents. The concentrations varied between 1.5%, 3.0%, 4.5% and 7.5%. As reference system commonly used maleated acid anhydride based coupling agents were used. The pre-treated wood particles were compounded via extrusion with polypropylene and samples were produced via injection and compression molding. The following properties were tested; tensile, bending, and impact strength, water uptake (cold and boiling water test), descent rate, weathering tests and durability test against basidiomycetes. 196 pp. Englisch.
- Softcover
- Print on Demand
Seller: moluna, Greven, Germanymoluna
Contact seller5-star sellerCondition: New
US$ 21.49
US$ 55.85 shippingShips from Germany to U.S.A.Quantity: Over 20 available
Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. KlappentextrnrnThe study investigated the influences of wood modification on the properties of Polyvinyl chloride (PVC) based Wood Polymer Composites (WPC). Various ethanolamines, L-arginine, pre-hydrolyzed and monome…ric aminosilane, melamine an.
- Softcover
- Print on Demand
Seller: buchversandmimpf2000, Emtmannsberg, BAYE, Germanybuchversandmimpf2000
Contact seller5-star sellerCondition: New
US$ 21.49
US$ 68.41 shippingShips from Germany to U.S.A.Quantity: 1 available
Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -The study investigated the influences of wood modification on the properties of Polyvinyl chloride (PVC) based Wood Polymer Composites (WPC). Various ethanolamines, L-arginine, pre-hydrolyzed and monomeric aminosilane, melamine and acet…ic anhydride treatment were used to improve the adhesion between wood and polymer as well as water absorption behavior and resistance to basidiomycetes. Amine based treatments were chosen to change the nature of wood from acidic to basic in order to increase the compatibility with the acidic polymer. Treated and untreated wood flour, PVC and additives were dry blended in a mixer. The dry blend was compounded to granulate by counter-rotating twin screw extrusion and compression moulded into panels using a hydraulic press.Elemental analysis (nitrogen content) via gas chromatography showed expected fixation of aminosilane and melamine treatment. The nitrogen fixation of ethanolamine and L-arginine treated material were obviously reduced, whereas the amount and reactivity of the aminogroups influenced the fixation behavior. With increasing content of amino-groups and reactivity, the fixation was improved. Fourier transform infrared (FTIR) analyses revealed interactions between monoethanolamine and cell wall components. The amine based treatments changed the nature of wood from acidic to basic. An improvement of the interphase was detected via mechanical property testing. Tensile strength, elongation at break and unnotched impact strength of the composite were obviously increased by Larginine, ethanolamine and aminosilane treatments. It has to be considered that amine based treatments (monoethanolamine in this study) led to reduced thermal stability of the composite. Thermogravimetric analysis showed a decrease of onset temperature with increasing monoethanolamine content. Water repellence of the composite was improved by melamine, pre-hydrolyzed aminosilane and acetic acid treatment. Treated and untreated composites revealed high resistance against basidiomycetes. Due to the low initial moisture content and low weight loss of untreated and treated composites, no effect of the various modifications was distinguished.Cuvillier Verlag, Nonnenstieg 8, 37075 Göttingen 88 pp. Englisch.
- Softcover
- Print on Demand
Seller: AHA-BUCH GmbH, Einbeck, GermanyAHA-BUCH GmbH
Contact seller5-star sellerCondition: New
US$ 21.49
US$ 69.14 shippingShips from Germany to U.S.A.Quantity: 1 available
Taschenbuch. Condition: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - The study investigated the influences of wood modification on the properties of Polyvinyl chloride (PVC) based Wood Polymer Composites (WPC). Various ethanolamines, L-arginine, pre-hydrolyzed and monomeric aminosilane, melamine and aceti…c anhydride treatment were used to improve the adhesion between wood and polymer as well as water absorption behavior and resistance to basidiomycetes. Amine based treatments were chosen to change the nature of wood from acidic to basic in order to increase the compatibility with the acidic polymer. Treated and untreated wood flour, PVC and additives were dry blended in a mixer. The dry blend was compounded to granulate by counter-rotating twin screw extrusion and compression moulded into panels using a hydraulic press.Elemental analysis (nitrogen content) via gas chromatography showed expected fixation of aminosilane and melamine treatment. The nitrogen fixation of ethanolamine and L-arginine treated material were obviously reduced, whereas the amount and reactivity of the aminogroups influenced the fixation behavior. With increasing content of amino-groups and reactivity, the fixation was improved. Fourier transform infrared (FTIR) analyses revealed interactions between monoethanolamine and cell wall components. The amine based treatments changed the nature of wood from acidic to basic. An improvement of the interphase was detected via mechanical property testing. Tensile strength, elongation at break and unnotched impact strength of the composite were obviously increased by Larginine, ethanolamine and aminosilane treatments. It has to be considered that amine based treatments (monoethanolamine in this study) led to reduced thermal stability of the composite. Thermogravimetric analysis showed a decrease of onset temperature with increasing monoethanolamine content. Water repellence of the composite was improved by melamine, pre-hydrolyzed aminosilane and acetic acid treatment. Treated and untreated composites revealed high resistance against basidiomycetes. Due to the low initial moisture content and low weight loss of untreated and treated composites, no effect of the various modifications was distinguished.
Language: English
Published by LAP LAMBERT Academic Publishing Nov 2014, 2014
- Softcover
- Print on Demand
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, GermanyBuchWeltWeit Ludwig Meier e.K.
Contact seller5-star sellerCondition: New
US$ 65.65
US$ 26.22 shippingShips from Germany to U.S.A.Quantity: 2 available
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Polymer nanocomposites (PNC) are of great interest owing to the many potential property enhancements possible via introducing different types of nanofillers in polymer matrices. In recent decades, increasing attention has being paid… to PNCs due to their light weight, low cost, and ease of processability compared to metal alternatives and due to their novel capability to tune properties. Depending on the end-use application, certain PNC properties are targeted and the their formulation and processing can be manipulated to achieve the desired properties. In this work, different PNC properties have been improved by employing different strategies;(1) Modification of nanofillers: Chemical treatment of nanoclay, multiwall carbon nanotube (MWCNT) and graphene nanoribbon (GNR);(2) Synthesis of novel nanofillers: GNR was synthesized from parent MWCNT to benefit from higher surface area and interaction of the novel nanofillers with the polymer chains;(3) Implementation of hybrid fillers: nanoclay as the secondary filler was utilized to further enhance the desired properties of PNC consisting of MWCNT;(4) Amendment of PNC production methods: Optimized PNC production conditions. 228 pp. Englisch.
- Softcover
- Print on Demand
Seller: moluna, Greven, Germanymoluna
Contact seller5-star sellerCondition: New
US$ 37.17
US$ 55.85 shippingShips from Germany to U.S.A.Quantity: Over 20 available
Kartoniert / Broschiert. Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. KlappentextrnrnWood Polymer Composites are a new group of hybrid materials, which combine the advantagesnof synthetic polymers such as polyolefines and natural polymers such as wood whereas th…ensynthetic polymer is used as matrix material and t.
- Softcover
- Print on Demand
Seller: preigu, Osnabrück, Germanypreigu
Contact seller5-star sellerCondition: New
US$ 20.08
US$ 79.81 shippingShips from Germany to U.S.A.Quantity: 5 available
Taschenbuch. Condition: Neu. Influence of Wood Modification on the Properties of Polyvinyl Chloride based Wood Polymer Composites (WPC) | Marcus Müller | Taschenbuch | Englisch | 2012 | Cuvillier | EAN 9783954041435 | Verantwortliche Person für die EU: Cuvillier Verlag, Nonnenstieg 8, 37075 Göttingen, info[at]cuvillier[dot]de |…Anbieter: preigu Print on Demand.
- Softcover
- Print on Demand
Seller: buchversandmimpf2000, Emtmannsberg, BAYE, Germanybuchversandmimpf2000
Contact seller5-star sellerCondition: New
US$ 37.17
US$ 68.41 shippingShips from Germany to U.S.A.Quantity: 1 available
Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Wood Polymer Composites are a new group of hybrid materials, which combine the advantagesof synthetic polymers such as polyolefines and natural polymers such as wood; whereas thesynthetic polymer is used as matrix material and the wood…as reinforcement material or filler. Asmatrix material, principally every thermoplastic polymer with a processing temperature below200°C can be used due to the temperature sensivity of wood. Wood Polymer Composites areprocessed typically with processing technologies from the plastic industry such as extrusion andinjection molding.The present study was conducted to explore the possibility of wood particle modification withdifferent types of silanes. It was the aim to contribute the silanes as compatibilizers or couplingagent and therefore improve the mechanical properties and the resistance against water. Norwayspruce (Picea abies) as representative wood species was used in three different particle types. Thesize distribution for the wood particles ranges from 70-2500 µm. Four commercial availablesilanes with various functional groups (amino, di-amino, alkyl) were used as modification agents.The concentrations varied between 1.5%, 3.0%, 4.5% and 7.5%. As reference system commonlyused maleated acid anhydride based coupling agents were used. The pre-treated wood particleswere compounded via extrusion with polypropylene and samples were produced via injection andcompression molding. The following properties were tested; tensile, bending, and impactstrength, water uptake (cold and boiling water test), descent rate, weathering tests and durabilitytest against basidiomycetes.Cuvillier Verlag, Nonnenstieg 8, 37075 Göttingen 196 pp. Englisch.
- Softcover
- Print on Demand
Seller: AHA-BUCH GmbH, Einbeck, GermanyAHA-BUCH GmbH
Contact seller5-star sellerCondition: New
US$ 37.17
US$ 69.90 shippingShips from Germany to U.S.A.Quantity: 1 available
Taschenbuch. Condition: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Wood Polymer Composites are a new group of hybrid materials, which combine the advantagesof synthetic polymers such as polyolefines and natural polymers such as wood; whereas thesynthetic polymer is used as matrix material and the wood a…s reinforcement material or filler. Asmatrix material, principally every thermoplastic polymer with a processing temperature below200°C can be used due to the temperature sensivity of wood. Wood Polymer Composites areprocessed typically with processing technologies from the plastic industry such as extrusion andinjection molding.The present study was conducted to explore the possibility of wood particle modification withdifferent types of silanes. It was the aim to contribute the silanes as compatibilizers or couplingagent and therefore improve the mechanical properties and the resistance against water. Norwayspruce (Picea abies) as representative wood species was used in three different particle types. Thesize distribution for the wood particles ranges from 70-2500 µm. Four commercial availablesilanes with various functional groups (amino, di-amino, alkyl) were used as modification agents.The concentrations varied between 1.5%, 3.0%, 4.5% and 7.5%. As reference system commonlyused maleated acid anhydride based coupling agents were used. The pre-treated wood particleswere compounded via extrusion with polypropylene and samples were produced via injection andcompression molding. The following properties were tested; tensile, bending, and impactstrength, water uptake (cold and boiling water test), descent rate, weathering tests and durabilitytest against basidiomycetes.
- Softcover
- Print on Demand
Seller: moluna, Greven, Germanymoluna
Contact seller5-star sellerCondition: New
US$ 54.24
US$ 55.85 shippingShips from Germany to U.S.A.Quantity: Over 20 available
Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Khajehpour MaryamDr. Maryam Khajehpour received her PhD from University of Calgary in 2014. Her research focus includes synthesis and modification of nanofillers and advanced polymer nanocomposites with… enhanced mechanical, thermal, .
- Softcover
- Print on Demand
Seller: preigu, Osnabrück, Germanypreigu
Contact seller5-star sellerCondition: New
US$ 33.23
US$ 79.81 shippingShips from Germany to U.S.A.Quantity: 5 available
Taschenbuch. Condition: Neu. Improvement of selected properties of Wood-Polymer Composites (WPC) - Silane modification of wood particles | Timo Grüneberg | Taschenbuch | Kartoniert / Broschiert | Englisch | 2010 | Cuvillier | EAN 9783869555614 | Verantwortliche Person für die EU: Cuvillier Verlag, Nonnenstieg 8, 37075 Göttingen,… info[at]cuvillier[dot]de | Anbieter: preigu Print on Demand.
Language: English
Published by LAP LAMBERT Academic Publishing Nov 2014, 2014
- Softcover
- Print on Demand
Seller: buchversandmimpf2000, Emtmannsberg, BAYE, Germanybuchversandmimpf2000
Contact seller5-star sellerCondition: New
US$ 65.65
US$ 68.41 shippingShips from Germany to U.S.A.Quantity: 1 available
Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Polymer nanocomposites (PNC) are of great interest owing to the many potential property enhancements possible via introducing different types of nanofillers in polymer matrices. In recent decades, increasing attention has being paid to…PNCs due to their light weight, low cost, and ease of processability compared to metal alternatives and due to their novel capability to tune properties. Depending on the end-use application, certain PNC properties are targeted and the their formulation and processing can be manipulated to achieve the desired properties. In this work, different PNC properties have been improved by employing different strategies;(1) Modification of nanofillers: Chemical treatment of nanoclay, multiwall carbon nanotube (MWCNT) and graphene nanoribbon (GNR);(2) Synthesis of novel nanofillers: GNR was synthesized from parent MWCNT to benefit from higher surface area and interaction of the novel nanofillers with the polymer chains;(3) Implementation of hybrid fillers: nanoclay as the secondary filler was utilized to further enhance the desired properties of PNC consisting of MWCNT;(4) Amendment of PNC production methods: Optimized PNC production conditions.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 228 pp. Englisch.
- Softcover
- Print on Demand
Seller: AHA-BUCH GmbH, Einbeck, GermanyAHA-BUCH GmbH
Contact seller5-star sellerCondition: New
US$ 65.65
US$ 70.45 shippingShips from Germany to U.S.A.Quantity: 1 available
Taschenbuch. Condition: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Polymer nanocomposites (PNC) are of great interest owing to the many potential property enhancements possible via introducing different types of nanofillers in polymer matrices. In recent decades, increasing attention has being paid to P…NCs due to their light weight, low cost, and ease of processability compared to metal alternatives and due to their novel capability to tune properties. Depending on the end-use application, certain PNC properties are targeted and the their formulation and processing can be manipulated to achieve the desired properties. In this work, different PNC properties have been improved by employing different strategies;(1) Modification of nanofillers: Chemical treatment of nanoclay, multiwall carbon nanotube (MWCNT) and graphene nanoribbon (GNR);(2) Synthesis of novel nanofillers: GNR was synthesized from parent MWCNT to benefit from higher surface area and interaction of the novel nanofillers with the polymer chains;(3) Implementation of hybrid fillers: nanoclay as the secondary filler was utilized to further enhance the desired properties of PNC consisting of MWCNT;(4) Amendment of PNC production methods: Optimized PNC production conditions.
- Softcover
- Print on Demand
Seller: preigu, Osnabrück, Germanypreigu
Contact seller5-star sellerCondition: New
US$ 56.31
US$ 79.81 shippingShips from Germany to U.S.A.Quantity: 5 available
Taschenbuch. Condition: Neu. Nanoparticle Modification and Enhanced Polymer Composites Properties | Maryam Khajehpour (u. a.) | Taschenbuch | 228 S. | Englisch | 2014 | LAP LAMBERT Academic Publishing | EAN 9783659624216 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]…preigu[dot]de | Anbieter: preigu Print on Demand.
Language: English
Published by William Andrew, 2016
Series: Plastics Design Library, Book 81 of 128. Book 81 of 128 - Plastics Design Library
- Hardcover
- Print on Demand
Seller: Brook Bookstore On Demand, Napoli, NA, ItalyBrook Bookstore On Demand
Contact seller5-star sellerCondition: New
US$ 187.78
US$ 9.12 shippingShips from Italy to U.S.A.Quantity: Over 20 available
Condition: new. Questo è un articolo print on demand.
Language: English
Published by Elsevier Science Ltd, 2016
Series: Plastics Design Library, Book 81 of 128. Book 81 of 128 - Plastics Design Library
- Hardcover
- Print on Demand
Seller: Revaluation Books, Exeter, United KingdomRevaluation Books
Contact seller5-star sellerCondition: New
US$ 231.79
US$ 16.68 shippingShips from United Kingdom to U.S.A.Quantity: 2 available
Hardcover. Condition: Brand New. 232 pages. 11.00x8.75x0.75 inches. In Stock. This item is printed on demand.
