Structure Properties Oriented Polymers by Ward Ian (24 results)

Paperback. Condition: New.

Condition: New. pp. 520.

Paperback. Condition: Brand New. reprint edition. 520 pages. 8.00x5.01x1.05 inches. In Stock.

Hardcover. Condition: Good. Good. Dust Jacket NOT present. CD WILL BE MISSING. . SHIPS FROM MULTIPLE LOCATIONS. book.

Condition: New.

Condition: Sehr gut. Zustand: Sehr gut | Seiten: 552 | Sprache: Englisch | Produktart: Bücher | The first edition was produced at a time when the advantages of studying oriented polymers were just becoming apparent. From a sci­ entific stand point it had been demonstrated that greater insight into both structure and properties could be obtained if an oriented polymer was prepared. From a technological viewpoint, major advances were under­ way, especially in high modulus and high strength fibres. Twenty years later, it is possible to review the scientific advances which have been made in this area and to provide much wider perspectives for the technology. As in the case of the first edition, the emphasis is on the methodologies available for characterizing oriented polymers and their mechanical behaviour. It is a particular pleasure to thank the contributing authors for their cooperation and Dr Philip Hastings of Chapman & Hall for his support and encouragement. I am also indebted to Professors A. H. Windle and D. C. Bassett for their respective contributions to sections 1. 3. 1 and 1. 3. 4. Although this chapter has been extensively revised, the contribution of the late Leslie Holliday to the first edition of this book is also acknowledged. Introduction 1 I. M. Ward 1. 1 THE PHENOMENON OF ORIENTATION Orientation in polymers is a phenomenon of great technical and theo­ retical importance. The word orientation itself conveys a number of ideas.…

Condition: New. In English.

Condition: New.

Condition: New. In English.

Buch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - The first edition was produced at a time when the advantages of studying oriented polymers were just becoming apparent. From a sci entific stand point it had been demonstrated that greater insight into both structure and properties could be obtained if an oriented polymer was prepared. From a technological viewpoint, major advances were under way, especially in high modulus and high strength fibres. Twenty years later, it is possible to review the scientific advances which have been made in this area and to provide much wider perspectives for the technology. As in the case of the first edition, the emphasis is on the methodologies available for characterizing oriented polymers and their mechanical behaviour. It is a particular pleasure to thank the contributing authors for their cooperation and Dr Philip Hastings of Chapman & Hall for his support and encouragement. I am also indebted to Professors A. H. Windle and D. C. Bassett for their respective contributions to sections 1. 3. 1 and 1. 3. 4. Although this chapter has been extensively revised, the contribution of the late Leslie Holliday to the first edition of this book is also acknowledged. Introduction 1 I. M. Ward 1. 1 THE PHENOMENON OF ORIENTATION Orientation in polymers is a phenomenon of great technical and theo retical importance. The word orientation itself conveys a number of ideas.…

Taschenbuch. Condition: Neu. Structure and Properties of Oriented Polymers | Ian M. Ward | Taschenbuch | xi | Englisch | 2012 | Springer | EAN 9789401064699 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.…

Condition: New. The understanding of the structure and properties of polymers in the oriented state is important in the field of polymer science and technology. This work discusses the various scientific advances that have been made in this area. It focuses on the methodologies available for characterizing oriented polymers and their mechanical behaviour. Editor(s): Ward, I. M. Num Pages: 536 pages, biography. BIC Classification: PNNP; TDCP. Category: (P) Professional & Vocational; (XV) Technical / Manuals. Dimension: 234 x 156 x 30. Weight in Grams: 945. . 1997. 2nd ed. 1997. Hardback. . . . .…

Taschenbuch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - The first edition was produced at a time when the advantages of studying oriented polymers were just becoming apparent. From a sci entific stand point it had been demonstrated that greater insight into both structure and properties could be obtained if an oriented polymer was prepared. From a technological viewpoint, major advances were under way, especially in high modulus and high strength fibres. Twenty years later, it is possible to review the scientific advances which have been made in this area and to provide much wider perspectives for the technology. As in the case of the first edition, the emphasis is on the methodologies available for characterizing oriented polymers and their mechanical behaviour. It is a particular pleasure to thank the contributing authors for their cooperation and Dr Philip Hastings of Chapman & Hall for his support and encouragement. I am also indebted to Professors A. H. Windle and D. C. Bassett for their respective contributions to sections 1. 3. 1 and 1. 3. 4. Although this chapter has been extensively revised, the contribution of the late Leslie Holliday to the first edition of this book is also acknowledged. Introduction 1 I. M. Ward 1. 1 THE PHENOMENON OF ORIENTATION Orientation in polymers is a phenomenon of great technical and theo retical importance. The word orientation itself conveys a number of ideas.…

Condition: New. The understanding of the structure and properties of polymers in the oriented state is important in the field of polymer science and technology. This work discusses the various scientific advances that have been made in this area. It focuses on the methodologies available for characterizing oriented polymers and their mechanical behaviour. Editor(s): Ward, I. M. Num Pages: 536 pages, biography. BIC Classification: PNNP; TDCP. Category: (P) Professional & Vocational; (XV) Technical / Manuals. Dimension: 234 x 156 x 30. Weight in Grams: 945. . 1997. 2nd ed. 1997. Hardback. . . . . Books ship from the US and Ireland.…

Hardcover. Condition: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

hardcover. Condition: New. In shrink wrap. Looks like an interesting title.

Condition: New. Print on Demand pp. 520 20:B&W 5 x 8 in or 203 x 127 mm Perfect Bound on White w/Gloss Lam.

Condition: New. PRINT ON DEMAND pp. 520.

Condition: new. Questo è un articolo print on demand.

Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The first edition was produced at a time when the advantages of studying oriented polymers were just becoming apparent. From a sci entific stand point it had been demonstrated that greater insight into both structure and properties could be obtained if an oriented polymer was prepared. From a technological viewpoint, major advances were under way, especially in high modulus and high strength fibres. Twenty years later, it is possible to review the scientific advances which have been made in this area and to provide much wider perspectives for the technology. As in the case of the first edition, the emphasis is on the methodologies available for characterizing oriented polymers and their mechanical behaviour. It is a particular pleasure to thank the contributing authors for their cooperation and Dr Philip Hastings of Chapman & Hall for his support and encouragement. I am also indebted to Professors A. H. Windle and D. C. Bassett for their respective contributions to sections 1. 3. 1 and 1. 3. 4. Although this chapter has been extensively revised, the contribution of the late Leslie Holliday to the first edition of this book is also acknowledged. Introduction 1 I. M. Ward 1. 1 THE PHENOMENON OF ORIENTATION Orientation in polymers is a phenomenon of great technical and theo retical importance. The word orientation itself conveys a number of ideas. 552 pp. Englisch.…

Buch. Condition: Neu. Structure and Properties of Oriented Polymers | Ian M. Ward | Buch | xi | Englisch | 1997 | Springer | EAN 9780412608803 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu Print on Demand.…

Buch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The first edition was produced at a time when the advantages of studying oriented polymers were just becoming apparent. From a sci entific stand point it had been demonstrated that greater insight into both structure and properties could be obtained if an oriented polymer was prepared. From a technological viewpoint, major advances were under way, especially in high modulus and high strength fibres. Twenty years later, it is possible to review the scientific advances which have been made in this area and to provide much wider perspectives for the technology. As in the case of the first edition, the emphasis is on the methodologies available for characterizing oriented polymers and their mechanical behaviour. It is a particular pleasure to thank the contributing authors for their cooperation and Dr Philip Hastings of Chapman & Hall for his support and encouragement. I am also indebted to Professors A. H. Windle and D. C. Bassett for their respective contributions to sections 1. 3. 1 and 1. 3. 4. Although this chapter has been extensively revised, the contribution of the late Leslie Holliday to the first edition of this book is also acknowledged. Introduction 1 I. M. Ward 1. 1 THE PHENOMENON OF ORIENTATION Orientation in polymers is a phenomenon of great technical and theo retical importance. The word orientation itself conveys a number of ideas. 552 pp. Englisch.…

Buch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -The first edition was produced at a time when the advantages of studying oriented polymers were just becoming apparent. From a sci entific stand point it had been demonstrated that greater insight into both structure and properties could be obtained if an oriented polymer was prepared. From a technological viewpoint, major advances were under way, especially in high modulus and high strength fibres. Twenty years later, it is possible to review the scientific advances which have been made in this area and to provide much wider perspectives for the technology. As in the case of the first edition, the emphasis is on the methodologies available for characterizing oriented polymers and their mechanical behaviour. It is a particular pleasure to thank the contributing authors for their cooperation and Dr Philip Hastings of Chapman & Hall for his support and encouragement. I am also indebted to Professors A. H. Windle and D. C. Bassett for their respective contributions to sections 1. 3. 1 and 1. 3. 4. Although this chapter has been extensively revised, the contribution of the late Leslie Holliday to the first edition of this book is also acknowledged. Introduction 1 I. M. Ward 1. 1 THE PHENOMENON OF ORIENTATION Orientation in polymers is a phenomenon of great technical and theo retical importance. The word orientation itself conveys a number of ideas.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 552 pp. Englisch.…

Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -The first edition was produced at a time when the advantages of studying oriented polymers were just becoming apparent. From a sci entific stand point it had been demonstrated that greater insight into both structure and properties could be obtained if an oriented polymer was prepared. From a technological viewpoint, major advances were under way, especially in high modulus and high strength fibres. Twenty years later, it is possible to review the scientific advances which have been made in this area and to provide much wider perspectives for the technology. As in the case of the first edition, the emphasis is on the methodologies available for characterizing oriented polymers and their mechanical behaviour. It is a particular pleasure to thank the contributing authors for their cooperation and Dr Philip Hastings of Chapman & Hall for his support and encouragement. I am also indebted to Professors A. H. Windle and D. C. Bassett for their respective contributions to sections 1. 3. 1 and 1. 3. 4. Although this chapter has been extensively revised, the contribution of the late Leslie Holliday to the first edition of this book is also acknowledged. Introduction 1 I. M. Ward 1. 1 THE PHENOMENON OF ORIENTATION Orientation in polymers is a phenomenon of great technical and theo retical importance. The word orientation itself conveys a number of ideas.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 552 pp. Englisch.…