Design, Simulation and Applications of Inductors and Transformers for Si RF ICs (The Springer International Series in Engineering and Computer Science)

0 avg rating
( 0 ratings by Goodreads )
 
9781475773668: Design, Simulation and Applications of Inductors and Transformers for Si RF ICs (The Springer International Series in Engineering and Computer Science)
View all copies of this ISBN edition:
 
 

The modern wireless communication industry has put great demands on circuit designers for smaller, cheaper transceivers in the gigahertz frequency range. One tool which has assisted designers in satisfying these requirements is the use of on-chip inductiveelements (inductors and transformers) in silicon (Si) radio-frequency (RF) integrated circuits (ICs). These elements allow greatly improved levels of performance in Si monolithic low-noise amplifiers, power amplifiers, up-conversion and down-conversion mixers and local oscillators. Inductors can be used to improve the intermodulation distortion performance and noise figure of small-signal amplifiers and mixers. In addition, the gain of amplifier stages can be enhanced and the realization of low-cost on-chip local oscillators with good phase noise characteristics is made feasible. In order to reap these benefits, it is essential that the IC designer be able to predict and optimize the characteristics of on-chip inductiveelements. Accurate knowledge of inductance values, quality factor (Q) and the influence of ad- cent elements (on-chip proximity effects) and substrate losses is essential. In this book the analysis, modeling and application of on-chip inductive elements is considered. Using analyses based on Maxwells equations, an accurate and efficient technique is developed to model these elements over a wide frequency range. Energy loss to the conductive substrate is modeled through several mechanisms, including electrically induced displacement and conductive c- rents and by magnetically induced eddy currents. These techniques have been compiled in a user-friendly software tool ASITIC (Analysis and Simulation of Inductors and Transformers for Integrated Circuits).

"synopsis" may belong to another edition of this title.

Buy New View Book
List Price: US$ 179.99
US$ 183.08

Convert currency

Shipping: FREE
From United Kingdom to U.S.A.

Destination, rates & speeds

Add to Basket

Top Search Results from the AbeBooks Marketplace

1.

Ali M. Niknejad, Robert G. Meyer
Published by Springer-Verlag New York Inc., United States (2013)
ISBN 10: 1475773668 ISBN 13: 9781475773668
New Paperback Quantity Available: 10
Print on Demand
Seller:
The Book Depository
(London, United Kingdom)
Rating
[?]

Book Description Springer-Verlag New York Inc., United States, 2013. Paperback. Condition: New. Language: English . Brand New Book ***** Print on Demand *****.The modern wireless communication industry has put great demands on circuit designers for smaller, cheaper transceivers in the gigahertz frequency range. One tool which has assisted designers in satisfying these requirements is the use of on-chip inductiveelements (inductors and transformers) in silicon (Si) radio-frequency (RF) integrated circuits (ICs). These elements allow greatly improved levels of performance in Si monolithic low-noise amplifiers, power amplifiers, up-conversion and down-conversion mixers and local oscillators. Inductors can be used to improve the intermodulation distortion performance and noise figure of small-signal amplifiers and mixers. In addition, the gain of amplifier stages can be enhanced and the realization of low-cost on-chip local oscillators with good phase noise characteristics is made feasible. In order to reap these benefits, it is essential that the IC designer be able to predict and optimize the characteristics of on-chip inductiveelements. Accurate knowledge of inductance values, quality factor (Q) and the influence of ad- cent elements (on-chip proximity effects) and substrate losses is essential. In this book the analysis, modeling and application of on-chip inductive elements is considered. Using analyses based on Maxwells equations, an accurate and efficient technique is developed to model these elements over a wide frequency range. Energy loss to the conductive substrate is modeled through several mechanisms, including electrically induced displacement and conductive c- rents and by magnetically induced eddy currents. These techniques have been compiled in a user-friendly software tool ASITIC (Analysis and Simulation of Inductors and Transformers for Integrated Circuits). Softcover reprint of the original 1st ed. 2000. Seller Inventory # AAV9781475773668

More information about this seller | Contact this seller

Buy New
US$ 183.08
Convert currency

Add to Basket

Shipping: FREE
From United Kingdom to U.S.A.
Destination, rates & speeds

2.

Ali M. Niknejad, Robert G. Meyer
Published by Springer-Verlag New York Inc., United States (2013)
ISBN 10: 1475773668 ISBN 13: 9781475773668
New Paperback Quantity Available: 10
Seller:
Book Depository hard to find
(London, United Kingdom)
Rating
[?]

Book Description Springer-Verlag New York Inc., United States, 2013. Paperback. Condition: New. Language: English . This book usually ship within 10-15 business days and we will endeavor to dispatch orders quicker than this where possible. Brand New Book. The modern wireless communication industry has put great demands on circuit designers for smaller, cheaper transceivers in the gigahertz frequency range. One tool which has assisted designers in satisfying these requirements is the use of on-chip inductiveelements (inductors and transformers) in silicon (Si) radio-frequency (RF) integrated circuits (ICs). These elements allow greatly improved levels of performance in Si monolithic low-noise amplifiers, power amplifiers, up-conversion and down-conversion mixers and local oscillators. Inductors can be used to improve the intermodulation distortion performance and noise figure of small-signal amplifiers and mixers. In addition, the gain of amplifier stages can be enhanced and the realization of low-cost on-chip local oscillators with good phase noise characteristics is made feasible. In order to reap these benefits, it is essential that the IC designer be able to predict and optimize the characteristics of on-chip inductiveelements. Accurate knowledge of inductance values, quality factor (Q) and the influence of ad- cent elements (on-chip proximity effects) and substrate losses is essential. In this book the analysis, modeling and application of on-chip inductive elements is considered. Using analyses based on Maxwells equations, an accurate and efficient technique is developed to model these elements over a wide frequency range. Energy loss to the conductive substrate is modeled through several mechanisms, including electrically induced displacement and conductive c- rents and by magnetically induced eddy currents. These techniques have been compiled in a user-friendly software tool ASITIC (Analysis and Simulation of Inductors and Transformers for Integrated Circuits). Softcover reprint of the original 1st ed. 2000. Seller Inventory # LIE9781475773668

More information about this seller | Contact this seller

Buy New
US$ 183.08
Convert currency

Add to Basket

Shipping: FREE
From United Kingdom to U.S.A.
Destination, rates & speeds

3.

Ali M. Niknejad, Robert G. Meyer
Published by Springer-Verlag New York Inc., United States (2013)
ISBN 10: 1475773668 ISBN 13: 9781475773668
New Paperback Quantity Available: 10
Print on Demand
Seller:
Book Depository International
(London, United Kingdom)
Rating
[?]

Book Description Springer-Verlag New York Inc., United States, 2013. Paperback. Condition: New. Language: English . Brand New Book ***** Print on Demand *****. The modern wireless communication industry has put great demands on circuit designers for smaller, cheaper transceivers in the gigahertz frequency range. One tool which has assisted designers in satisfying these requirements is the use of on-chip inductiveelements (inductors and transformers) in silicon (Si) radio-frequency (RF) integrated circuits (ICs). These elements allow greatly improved levels of performance in Si monolithic low-noise amplifiers, power amplifiers, up-conversion and down-conversion mixers and local oscillators. Inductors can be used to improve the intermodulation distortion performance and noise figure of small-signal amplifiers and mixers. In addition, the gain of amplifier stages can be enhanced and the realization of low-cost on-chip local oscillators with good phase noise characteristics is made feasible. In order to reap these benefits, it is essential that the IC designer be able to predict and optimize the characteristics of on-chip inductiveelements. Accurate knowledge of inductance values, quality factor (Q) and the influence of ad- cent elements (on-chip proximity effects) and substrate losses is essential. In this book the analysis, modeling and application of on-chip inductive elements is considered. Using analyses based on Maxwells equations, an accurate and efficient technique is developed to model these elements over a wide frequency range. Energy loss to the conductive substrate is modeled through several mechanisms, including electrically induced displacement and conductive c- rents and by magnetically induced eddy currents. These techniques have been compiled in a user-friendly software tool ASITIC (Analysis and Simulation of Inductors and Transformers for Integrated Circuits). Softcover reprint of the original 1st ed. 2000. Seller Inventory # AAV9781475773668

More information about this seller | Contact this seller

Buy New
US$ 190.56
Convert currency

Add to Basket

Shipping: FREE
From United Kingdom to U.S.A.
Destination, rates & speeds

4.

Ali M. Niknejad
Published by Springer-Verlag New York Inc. (2013)
ISBN 10: 1475773668 ISBN 13: 9781475773668
New Quantity Available: > 20
Print on Demand
Seller:
Books2Anywhere
(Fairford, GLOS, United Kingdom)
Rating
[?]

Book Description Springer-Verlag New York Inc., 2013. PAP. Condition: New. New Book. Delivered from our UK warehouse in 3 to 5 business days. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000. Seller Inventory # LQ-9781475773668

More information about this seller | Contact this seller

Buy New
US$ 179.33
Convert currency

Add to Basket

Shipping: US$ 11.72
From United Kingdom to U.S.A.
Destination, rates & speeds

5.

Meyer, Robert G.
Published by Springer-Verlag New York Inc. (2013)
ISBN 10: 1475773668 ISBN 13: 9781475773668
New Quantity Available: > 20
Print on Demand
Seller:
Pbshop
(Wood Dale, IL, U.S.A.)
Rating
[?]

Book Description Springer-Verlag New York Inc., 2013. PAP. Condition: New. New Book. Shipped from US within 10 to 14 business days. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000. Seller Inventory # IQ-9781475773668

More information about this seller | Contact this seller

Buy New
US$ 192.32
Convert currency

Add to Basket

Shipping: US$ 3.99
Within U.S.A.
Destination, rates & speeds

6.

ALI M. NIKNEJAD
Published by Springer (2013)
ISBN 10: 1475773668 ISBN 13: 9781475773668
New Paperback Quantity Available: 1
Seller:
Herb Tandree Philosophy Books
(Stroud, GLOS, United Kingdom)
Rating
[?]

Book Description Springer, 2013. Paperback. Condition: NEW. 9781475773668 This listing is a new book, a title currently in-print which we order directly and immediately from the publisher. For all enquiries, please contact Herb Tandree Philosophy Books directly - customer service is our primary goal. Seller Inventory # HTANDREE0415430

More information about this seller | Contact this seller

Buy New
US$ 191.78
Convert currency

Add to Basket

Shipping: US$ 10.39
From United Kingdom to U.S.A.
Destination, rates & speeds

7.

Ali M. Niknejad; Robert G. Meyer; Ali M. Niknejad
Published by Springer (2013)
ISBN 10: 1475773668 ISBN 13: 9781475773668
New Softcover Quantity Available: 15
Print on Demand
Seller:
Rating
[?]

Book Description Springer, 2013. Condition: New. This item is printed on demand for shipment within 3 working days. Seller Inventory # LP9781475773668

More information about this seller | Contact this seller

Buy New
US$ 206.82
Convert currency

Add to Basket

Shipping: US$ 3.43
From Germany to U.S.A.
Destination, rates & speeds