Items related to Generative Manufacturing of Optical, Thermal and Structural...
Synopsis
The book describes and explains the results of the collaborative project Generative Manufacturing of Optical, Thermal and Structural Components over the last three years. The overall goal is the development of a system concept based on generative manufacturing for integrated optical and optomechanical systems. Different developed generative manufacturing processes for glass and specially designed metal powders have been implemented in a single fabrication set up enabling multi-material manufacturing of optical components and systems. The main focus of the project is split into several topics: simulation, design, material engineering, process engineering, post-processing and component evaluation. The simulation of the glass printing process will be structured iteratively with a comparison of the experimental results in order to be able to finally make a prediction of the necessary parameter sizes for defined components. A metal material with similar thermal conductivity and thermal expansion properties to glass or laser-active crystals has been developed iteratively over the course of the project to enable direct printing onto these materials. In order to demonstrate the potential of generatively manufactured optomechanics for function-integrated systems, the optomechanical components required for a solid-state laser system are manufactured in a polymer-based 3D printing process and their properties are characterized. All these individual projects of the overall network are combined in the system concept.
"synopsis" may belong to another edition of this title.
About the Author
Prof. Dr.-Ing. Roland Lachmayer, Leibniz University Hannover, Institute of Product Development, An der Universität 1, 30823 Garbsen.
Dr. Dietmar Kracht, Laser Zentrum Hannover e.V., Hollerithallee 8, 30419 Hannover
Prof. Dr.-Ing. Volker Wesling, Clausthal Centre for Material Technology, Leibnizstr. 9, 38678 Clausthal-Zellerfeld
Prof. Dr.-Ing. Henning Ahlers, University of Applied Science and Arts Hannover, Ricklinger Stadtweg 120, 30459 Hannover
From the Back Cover
The book describes and explains the results of the collaborative project Generative Manufacturing of Optical, Thermal and Structural Components over the last three years. The overall goal is the development of a system concept based on generative manufacturing for integrated optical and optomechanical systems. Different developed generative manufacturing processes for glass and specially designed metal powders have been implemented in a single fabrication set up enabling multi-material manufacturing of optical components and systems. The main focus of the project is split into several topics: simulation, design, material engineering, process engineering, post-processing and component evaluation. The simulation of the glass printing process will be structured iteratively with a comparison of the experimental results in order to be able to finally make a prediction of the necessary parameter sizes for defined components. A metal material with similar thermal conductivity and thermal expansion properties to glass or laser-active crystals has been developed iteratively over the course of the project to enable direct printing onto these materials. In order to demonstrate the potential of generatively manufactured optomechanics for function-integrated systems, the optomechanical components required for a solid-state laser system are manufactured in a polymer-based 3D printing process and their properties are characterized. All these individual projects of the overall network are combined in the system concept.
"About this title" may belong to another edition of this title.
Search results for Generative Manufacturing of Optical, Thermal and Structural...
Stock Image
Generative Manufacturing of Optical, Thermal and Structural Components (Grotesk) [Paperback] [Apr 14, 2022] Lachmayer, Roland; Kracht, Dietmar; Wesling, Volker and Ahlers, Henning
Seller: StainesBookhub, Weybridge, SURRE, United Kingdom
Seller rating 2 out of 5 stars
Condition: New. A brand new book in pristine condition. Showing zero signs of shelf wear, creases, or damage. Seller Inventory # SPRINGERNEWLISTING101123
Buy New
US$ 92.17
US$ 39.74 shipping
Ships from United Kingdom to U.S.A.
Ships from United Kingdom to U.S.A.
Quantity: 1 available
Stock Image
Generative Manufacturing of Optical, Th (eng)
Print on DemandSeller: Brook Bookstore On Demand, Napoli, NA, Italy
Seller rating 5 out of 5 stars
Condition: new. Questo è un articolo print on demand. Seller Inventory # HAZGMJVZHS
Buy New
US$ 148.14
US$ 6.27 shipping
Ships from Italy to U.S.A.
Ships from Italy to U.S.A.
Quantity: Over 20 available
Seller Image
Generative Manufacturing of Optical, Thermal and Structural Components (GROTESK)
Published by
Springer International Publishing Apr 2022, 2022
ISBN 10: 3030965007
ISBN 13: 9783030965006
New
Taschenbuch
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The book describes and explains the results of the collaborative project Generative Manufacturing of Optical, Thermal and Structural Components over the last three years. The overall goal is the development of a system concept based on generative manufacturing for integrated optical and optomechanical systems. Different developed generative manufacturing processes for glass and specially designed metal powders have been implemented in a single fabrication set up enabling multi-material manufacturing of optical components and systems. The main focus of the project is split into several topics: simulation, design, material engineering, process engineering, post-processing and component evaluation. The simulation of the glass printing process will be structured iteratively with a comparison of the experimental results in order to be able to finally make a prediction of the necessary parameter sizes for defined components. A metal material with similar thermal conductivity and thermal expansion properties to glass or laser-active crystals has been developed iteratively over the course of the project to enable direct printing onto these materials. In order to demonstrate the potential of generatively manufactured optomechanics for function-integrated systems, the optomechanical components required for a solid-state laser system are manufactured in a polymer-based 3D printing process and their properties are characterized. All these individual projects of the overall network are combined in the system concept. 172 pp. Englisch. Seller Inventory # 9783030965006
Buy New
US$ 188.29
US$ 26.20 shipping
Ships from Germany to U.S.A.
Ships from Germany to U.S.A.
Quantity: 2 available
Stock Image
Generative Manufacturing of Optical, Thermal and Structural Components (GROTESK)
Seller: Buchpark, Trebbin, Germany
Seller rating 5 out of 5 stars
Condition: Hervorragend. Zustand: Hervorragend | Sprache: Englisch | Produktart: Bücher | The book describes and explains the results of the collaborative project Generative Manufacturing of Optical, Thermal and Structural Components over the last three years. The overall goal is the development of a system concept based on generative manufacturing for integrated optical and optomechanical systems. Different developed generative manufacturing processes for glass and specially designed metal powders have been implemented in a single fabrication set up enabling multi-material manufacturing of optical components and systems. The main focus of the project is split into several topics: simulation, design, material engineering, process engineering, post-processing and component evaluation. The simulation of the glass printing process will be structured iteratively with a comparison of the experimental results in order to be able to finally make a prediction of the necessary parameter sizes for defined components. A metal material with similar thermal conductivity and thermal expansion properties to glass or laser-active crystals has been developed iteratively over the course of the project to enable direct printing onto these materials. In order to demonstrate the potential of generatively manufactured optomechanics for function-integrated systems, the optomechanical components required for a solid-state laser system are manufactured in a polymer-based 3D printing process and their properties are characterized. All these individual projects of the overall network are combined in the system concept. Seller Inventory # 38644857/1
Buy Used
US$ 95.78
US$ 119.61 shipping
Ships from Germany to U.S.A.
Ships from Germany to U.S.A.
Quantity: 6 available
Stock Image
Generative Manufacturing of Optical, Thermal and Structural Components (GROTESK)
Seller: Ria Christie Collections, Uxbridge, United Kingdom
Seller rating 5 out of 5 stars
Condition: New. In English. Seller Inventory # ria9783030965006_new
Buy New
US$ 207.13
US$ 12.41 shipping
Ships from United Kingdom to U.S.A.
Ships from United Kingdom to U.S.A.
Quantity: Over 20 available
Stock Image
Generative Manufacturing of Optical, Thermal and Structural Components (GROTESK)
Seller: Books Puddle, Woodside, NY, U.S.A.
Seller rating 4 out of 5 stars
Condition: New. 1st ed. 2022 edition NO-PA16APR2015-KAP. Seller Inventory # 26394683999
Seller Image
Generative Manufacturing of Optical, Thermal and Structural Components (GROTESK)
Seller: AHA-BUCH GmbH, Einbeck, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - The book describes and explains the results of the collaborative project Generative Manufacturing of Optical, Thermal and Structural Components over the last three years. The overall goal is the development of a system concept based on generative manufacturing for integrated optical and optomechanical systems. Different developed generative manufacturing processes for glass and specially designed metal powders have been implemented in a single fabrication set up enabling multi-material manufacturing of optical components and systems. The main focus of the project is split into several topics: simulation, design, material engineering, process engineering, post-processing and component evaluation. The simulation of the glass printing process will be structured iteratively with a comparison of the experimental results in order to be able to finally make a prediction of the necessary parameter sizes for defined components. A metal material with similar thermal conductivity and thermal expansion properties to glass or laser-active crystals has been developed iteratively over the course of the project to enable direct printing onto these materials. In order to demonstrate the potential of generatively manufactured optomechanics for function-integrated systems, the optomechanical components required for a solid-state laser system are manufactured in a polymer-based 3D printing process and their properties are characterized. All these individual projects of the overall network are combined in the system concept. Seller Inventory # 9783030965006
Buy New
US$ 203.52
US$ 39.87 shipping
Ships from Germany to U.S.A.
Ships from Germany to U.S.A.
Quantity: 1 available
Seller Image
Generative Manufacturing of Optical, Thermal and Structural Components (GROTESK)
Seller: preigu, Osnabrück, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. Generative Manufacturing of Optical, Thermal and Structural Components (GROTESK) | Roland Lachmayer (u. a.) | Taschenbuch | xiii | Englisch | 2022 | Springer | EAN 9783030965006 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu. Seller Inventory # 121079125
Buy New
US$ 164.37
US$ 79.74 shipping
Ships from Germany to U.S.A.
Ships from Germany to U.S.A.
Quantity: 5 available
Stock Image
Generative Manufacturing of Optical, Thermal and Structural Components (GROTESK)
Print on DemandSeller: Majestic Books, Hounslow, United Kingdom
Seller rating 4 out of 5 stars
Condition: New. Print on Demand. Seller Inventory # 401725824
Buy New
US$ 243.56
US$ 8.61 shipping
Ships from United Kingdom to U.S.A.
Ships from United Kingdom to U.S.A.
Quantity: 4 available
Seller Image
Generative Manufacturing of Optical, Thermal and Structural Components (GROTESK)
Published by
Springer, Springer International Publishing Apr 2022, 2022
ISBN 10: 3030965007
ISBN 13: 9783030965006
New
Taschenbuch
Seller: buchversandmimpf2000, Emtmannsberg, BAYE, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -The book describes and explains the results of the collaborative project Generative Manufacturing of Optical, Thermal and Structural Components over the last three years. The overall goal is the development of a system concept based on generative manufacturing for integrated optical and optomechanical systems. Different developed generative manufacturing processes for glass and specially designed metal powders have been implemented in a single fabrication set up enabling multi-material manufacturing of optical components and systems. The main focus of the project is split into several topics: simulation, design, material engineering, process engineering, post-processing and component evaluation. The simulation of the glass printing process will be structured iteratively with a comparison of the experimental results in order to be able to finally make a prediction of the necessary parameter sizes for defined components. A metal material with similar thermal conductivity and thermal expansion properties to glass or laser-active crystals has been developed iteratively over the course of the project to enable direct printing onto these materials. In order to demonstrate the potential of generatively manufactured optomechanics for function-integrated systems, the optomechanical components required for a solid-state laser system are manufactured in a polymer-based 3D printing process and their properties are characterized. All these individual projects of the overall network are combined in the system concept.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 172 pp. Englisch. Seller Inventory # 9783030965006
Buy New
US$ 188.29
US$ 68.35 shipping
Ships from Germany to U.S.A.
Ships from Germany to U.S.A.
Quantity: 1 available