Network of Things Engineering (NoTE) Lab - Hardcover

Jukan, Admela; Masip-Bruin, Xavi; Dizdarević, Jasenka; Carpio, Francisco

Hardcover

ISBN 10: 3031206347 ISBN 13: 9783031206344

Publisher: Springer, 2023

Synopsis

This book provides a hands-on experience in software and hardware development of IoT devices in edge and cloud computing systems, by putting concepts of networking and computing software with devices and hardware in practice. It proposes a Network of Things engineering (NoTE) Lab, with seven hand-on lab modules, ranging from labs on “Interfacing sensors and actuators” and “Connecting IoT and Edge with MQTT,” over to “Integrating sensors and actuators with edge and cloud tools”. In IoT context, it uses Arduino based boards that support a variety of low-cost sensors and actuators.  In the edge computing context, NoTE Lab implements off-the-shelf single board computers, Raspberry Pis with corresponding software and hardware. In the cloud context, a few well-known and widely used cloud computing open-source tools, for example, Kubernetes, where readers can learn the basics of monitoring and managing containers in cloud computing designed for undergraduate and graduate course levels. This book is easy to follow and all tools and software used in this book are free, open source, and available to the readers.

About this title

About the Author

Admela Jukan is Chair Professor in Communication Networks at TU Braunschweig. Prior to that, she worked in academia and industry, in the USA and Canada. She is Fellow of the IEEE and recipient of multiple industrial and research community awards. Admela received her Dr.tech. degree (cum laude) in Electrical and Computer Engineering from the Technische Universität Wien, M.Sc. degree in Information Technologies from the Politecnico di Milano, Italy, and her Dipl. -Ing. degree from the Fakultet Elektrotehnike i Racunarstva (FER), in Zagreb, Croatia. 

Xavi Masip is Full Professor at the Computer Architecture Dpt. of the UPC and Director of the Center for Advanced Network Architectures (CRAAX). His research activity has driven several research contracts with public and industrial sectors, two start-ups exploiting technology transfer, several scientific contributions, and has been awarded with an IBM Faculty Award in 2016 for his contributions in the fog/edge/cloud computing field. Xavi Masip received his Telecommunication Engineering degree (B.Sc., M.Sc., and Ph.D.) from UPC in Barcelona, Spain. 

Jasenka Dizdarević obtained her B.Sc. and M.Sc. engineering degrees in Telecommunications Engineering from Faculty of Electrical Engineering in Sarajevo, Bosnia, and Herzegovina. She is currently pursuing her Ph.D. (Dr.-Ing.) degree at Technische Universität Braunschweig, Germany. Her main research focus is in the area of application layer protocols communication protocols, its performance analysis, and experimentations. Jasenka is the main hardware architect in NoTE Lab.

Francisco Carpio received his M.Sc. and B.Sc. degrees in Telecommunications Engineering from Universitat Politčcnica de Catalunya (UPC), Spain. He is currently pursuing his Ph.D. (Dr.-Ing.) degree at Technische Universität Braunschweig. He is Active Developer Contributor to the open source community and works in the area of optimizations and architecture design of IoT, edge, and cloud computing systems. He is the main software architect in NoTE Lab.

From the Back Cover

This book provides a hands-on experience in software and hardware development of IoT devices in edge and cloud computing systems, by putting concepts of networking and computing software with devices and hardware in practice. It proposes a Network of Things engineering (NoTE) Lab, with seven hand-on lab modules, ranging from labs on “Interfacing sensors and actuators” and “Connecting IoT and Edge with MQTT,” over to “Integrating sensors and actuators with edge and cloud tools”. In IoT context, it uses Arduino based boards that support a variety of low-cost sensors and actuators.  In the edge computing context, NoTE Lab implements off-the-shelf single board computers, Raspberry Pis with corresponding software and hardware. In the cloud context, a few well-known and widely used cloud computing open-source tools, for example, Kubernetes, where readers can learn the basics of monitoring and managing containers in cloud computing designed for undergraduate and graduate course levels. This book is easy to follow and all tools and software used in this book are free, open source, and available to the readers.

Edition details

• Publisher: Springer
• Publication date: 2023
• Language: English
• ISBN 10: 3031206347
• ISBN 13: 9783031206344
• Binding: Hardcover
• Number of pages: 240