Synopsis
Internal combustion engines (ICE) still have potential for substantial improvements, particularly with regard to fuel efficiency and environmental compatibility. In order to fully exploit the remaining margins, increasingly sophisticated control systems have to be applied. This book offers an introduction to cost-effective model-based control-system design for ICE. The primary emphasis is put on the ICE and its auxiliary devices. Mathematical models for these processes are developed and solutions for selected feedforward and feedback control-problems are presented.
The discussions concerning pollutant emissions and fuel economy of ICE in automotive applications constantly intensified since the first edition of this book was published. Concerns about the air quality, the limited resources of fossil fuels and the detrimental effects of greenhouse gases exceedingly spurred the interest of both the industry and academia in further improvements.
The most important changes and additions included in this second edition are: restructured and slightly extended section on superchargers, short subsection on rotational oscillations and their treatment on engine test-benches, complete section on modeling, detection, and control of engine knock, improved physical and chemical model for the three-way catalytic converter, new methodology for the design of an air-to-fuel ratio controller, short introduction to thermodynamic engine-cycle calculation and corresponding control-oriented aspects.
"synopsis" may belong to another edition of this title.
From the Back Cover
Internal combustion engines (ICE) still have potential for substantial improvements, particularly with regard to fuel efficiency and environmental compatibility. In order to fully exploit the remaining margins, increasingly sophisticated control systems have to be applied. This book offers an introduction to cost-effective model-based control-system design for ICE. The primary emphasis is put on the ICE and its auxiliary devices. Mathematical models for these processes are developed and solutions for selected feedforward and feedback control-problems are presented.
The discussions concerning pollutant emissions and fuel economy of ICE in automotive applications constantly intensified since the first edition of this book was published. Concerns about the air quality, the limited resources of fossil fuels and the detrimental effects of greenhouse gases exceedingly spurred the interest of both the industry and academia in further improvements.
The most important changes and additions included in this second edition are:
• restructured and slightly extended section on superchargers;
• short subsection on rotational oscillations and their treatment on engine test-benches;
• complete section on modeling, detection, and control of engine knock;
• improved physical and chemical model for the three-way catalytic converter;
• new methodology for the design of an air-to-fuel ratio controller;
• short introduction to thermodynamic engine-cycle calculation and corresponding control-oriented aspects
"About this title" may belong to another edition of this title.
Other Popular Editions of the Same Title
Search results for Introduction to Modeling and Control of Internal Combustion...
Stock Image
Introduction to Modeling and Control of Internal Combustion Engine Systems
Published by
Springer (edition 2nd ed. 2010), 2009
ISBN 10: 3642107745
ISBN 13: 9783642107740
Used
Hardcover
Seller: BooksRun, Philadelphia, PA, U.S.A.
Seller rating 5 out of 5 stars
Hardcover. Condition: Very Good. 2nd ed. 2010. It's a well-cared-for item that has seen limited use. The item may show minor signs of wear. All the text is legible, with all pages included. It may have slight markings and/or highlighting. Seller Inventory # 3642107745-8-1
Stock Image
Introduction to Modeling and Control of Internal Combustion Engine Systems
Seller: HPB-Red, Dallas, TX, U.S.A.
Seller rating 5 out of 5 stars
hardcover. Condition: Good. Connecting readers with great books since 1972! Used textbooks may not include companion materials such as access codes, etc. May have some wear or writing/highlighting. We ship orders daily and Customer Service is our top priority! Seller Inventory # S_447981325
Seller Image
Introduction to Modeling and Control of Internal Combustion Engine Systems
Seller: Solr Books, Lincolnwood, IL, U.S.A.
Seller rating 5 out of 5 stars
Condition: like_new. This book is in Like New condition. It appears to be NEW, but might have a minor defect. Seller Inventory # BCV.3642107745.LN
Seller Image
Introduction to Modeling and Control of Internal Combustion Engine Systems
Seller: GreatBookPrices, Columbia, MD, U.S.A.
Seller rating 5 out of 5 stars
Condition: New. Seller Inventory # 7780795-n
Stock Image
Introduction to Modeling and Control of Internal Combustion Engine Systems
Seller: Ria Christie Collections, Uxbridge, United Kingdom
Seller rating 5 out of 5 stars
Condition: New. In. Seller Inventory # ria9783642107740_new
Buy New
US$ 159.20
Shipping:
US$ 15.64
From United Kingdom to U.S.A.
Quantity: Over 20 available
Seller Image
Introduction to Modeling and Control of Internal Combustion Engine Systems
Seller: GreatBookPricesUK, Woodford Green, United Kingdom
Seller rating 5 out of 5 stars
Condition: New. Seller Inventory # 7780795-n
Buy New
US$ 159.18
Shipping:
US$ 19.58
From United Kingdom to U.S.A.
Quantity: 1 available
Seller Image
Introduction to Modeling and Control of Internal Combustion Engine Systems
Published by
Springer-Verlag Gmbh Dez 2009, 2009
ISBN 10: 3642107745
ISBN 13: 9783642107740
New
Hardcover
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germany
Seller rating 5 out of 5 stars
Buch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Internal combustion engines (ICE) still have potential for substantial improvements, particularly with regard to fuel efficiency and environmental compatibility. In order to fully exploit the remaining margins, increasingly sophisticated control systems have to be applied. This book offers an introduction to cost-effective model-based control-system design for ICE. The primary emphasis is put on the ICE and its auxiliary devices. Mathematical models for these processes are developed and solutions for selected feedforward and feedback control-problems are presented.The discussions concerning pollutant emissions and fuel economy of ICE in automotive applications constantly intensified since the first edition of this book was published. Concerns about the air quality, the limited resources of fossil fuels and the detrimental effects of greenhouse gases exceedingly spurred the interest of both the industry and academia in further improvements.The most important changes and additions included in this second edition are: restructured and slightly extended section on superchargers, short subsection on rotational oscillations and their treatment on engine test-benches, complete section on modeling, detection, and control of engine knock, improved physical and chemical model for the three-way catalytic converter, new methodology for the design of an air-to-fuel ratio controller, short introduction to thermodynamic engine-cycle calculation and corresponding control-oriented aspects. 354 pp. Englisch. Seller Inventory # 9783642107740
Seller Image
Introduction to Modeling and Control of Internal Combustion Engine Systems
Published by
Springer Berlin Heidelberg, 2009
ISBN 10: 3642107745
ISBN 13: 9783642107740
New
Hardcover
Seller: moluna, Greven, Germany
Seller rating 4 out of 5 stars
Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Description of the mathematical modelling of the physical processes associated with Internal Combustion EnginesProvides the model-based controller design and optimization for novel motor technologiesInternal combustion engines (ICE) sti. Seller Inventory # 5049343
Buy New
US$ 152.05
Shipping:
US$ 56.32
From Germany to U.S.A.
Quantity: Over 20 available
Seller Image
Introduction to Modeling and Control of Internal Combustion Engine Systems
Published by
Springer-Verlag New York Inc., US, 2009
ISBN 10: 3642107745
ISBN 13: 9783642107740
New
Hardcover
Seller: Rarewaves.com USA, London, LONDO, United Kingdom
Seller rating 5 out of 5 stars
Hardback. Condition: New. 2nd ed. 2010. Internal combustion engines (ICE) still have potential for substantial improvements, particularly with regard to fuel efficiency and environmental compatibility. In order to fully exploit the remaining margins, increasingly sophisticated control systems have to be applied. This book offers an introduction to cost-effective model-based control-system design for ICE. The primary emphasis is put on the ICE and its auxiliary devices. Mathematical models for these processes are developed and solutions for selected feedforward and feedback control-problems are presented.The discussions concerning pollutant emissions and fuel economy of ICE in automotive applications constantly intensified since the first edition of this book was published. Concerns about the air quality, the limited resources of fossil fuels and the detrimental effects of greenhouse gases exceedingly spurred the interest of both the industry and academia in further improvements.The most important changes and additions included in this second edition are: restructured and slightly extended section on superchargers, short subsection on rotational oscillations and their treatment on engine test-benches, complete section on modeling, detection, and control of engine knock, improved physical and chemical model for the three-way catalytic converter, new methodology for the design of an air-to-fuel ratio controller, short introduction to thermodynamic engine-cycle calculation and corresponding control-oriented aspects. Seller Inventory # LU-9783642107740
Buy New
US$ 227.05
Shipping:
FREE
From United Kingdom to U.S.A.
Quantity: Over 20 available
Seller Image
Introduction to Modeling and Control of Internal Combustion Engine Systems
Published by
Springer, Berlin, Springer Berlin Heidelberg, Springer, 2009
ISBN 10: 3642107745
ISBN 13: 9783642107740
New
Hardcover
Seller: AHA-BUCH GmbH, Einbeck, Germany
Seller rating 5 out of 5 stars
Buch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - Internal combustion engines (ICE) still have potential for substantial improvements, particularly with regard to fuel efficiency and environmental compatibility. In order to fully exploit the remaining margins, increasingly sophisticated control systems have to be applied. This book offers an introduction to cost-effective model-based control-system design for ICE. The primary emphasis is put on the ICE and its auxiliary devices. Mathematical models for these processes are developed and solutions for selected feedforward and feedback control-problems are presented.The discussions concerning pollutant emissions and fuel economy of ICE in automotive applications constantly intensified since the first edition of this book was published. Concerns about the air quality, the limited resources of fossil fuels and the detrimental effects of greenhouse gases exceedingly spurred the interest of both the industry and academia in further improvements.The most important changes and additions included in this second edition are: restructured and slightly extended section on superchargers, short subsection on rotational oscillations and their treatment on engine test-benches, complete section on modeling, detection, and control of engine knock, improved physical and chemical model for the three-way catalytic converter, new methodology for the design of an air-to-fuel ratio controller, short introduction to thermodynamic engine-cycle calculation and corresponding control-oriented aspects. Seller Inventory # 9783642107740