Synopsis
Thin walled structures so extensively used nowadays in industry and civil engineering are usually loaded by very complex systems of forces acting on their edges or over their surfaces. In calculating the strength of a structure we replace real loads by certain idealized loads distinguishing between typical surface loads distributed over a great area of the structure and loads acting over a small area. The latter are called concentrated loads. When the area under the load is very small in comparison with the dimensions of the surface of the structure, for example, when the diameter of the loaded area is smaller than the wall thickness, the load can be considered as a single force or a mo ment acting on the structure at one point only. The real loads which are met in practice can always be replaced by a combination of components such as forces normal and tangential to the wall as well as bending and twisting moments. Knowing the distribution of the stresses in the structure produced by each component, we can find it under any arbitrary load using the principle of superposition. There are two main reasons for the appearance of the concentration of stresses in the structure. It can be produced by notches, rapid changes of the cross-section, holes, cutouts, etc. on one hand and by concentrated loads resulting from the interaction of the elements of the structure on the other.
"synopsis" may belong to another edition of this title.
Language Notes
Text: English, Polish (translation)
"About this title" may belong to another edition of this title.
Other Popular Editions of the Same Title
Search results for Local loads in plates and shells (Mechanics of Surface...
Seller Image
Local Loads in Plates and Shells: 4
Seller: Libreria sottomarina - Studio Bibliografico, ROMA, RM, Italy
Seller rating 5 out of 5 stars
brossura. Condition: Buono (Good). Book. Seller Inventory # ca04ajoTEK
Stock Image
Local loads in plates and shells (Mechanics of Surface Structure)
Seller: Lucky's Textbooks, Dallas, TX, U.S.A.
Seller rating 5 out of 5 stars
Condition: New. Seller Inventory # ABLIING23Apr0412070053411
Stock Image
Local loads in plates and shells (Mechanics of Surface Structure)
Seller: Ria Christie Collections, Uxbridge, United Kingdom
Seller rating 5 out of 5 stars
Condition: New. In. Seller Inventory # ria9789400995437_new
Buy New
US$ 128.37
Shipping:
US$ 15.86
From United Kingdom to U.S.A.
Quantity: Over 20 available
Seller Image
Local loads in plates and shells
Published by
Springer Netherlands, Springer Dez 2011, 2011
ISBN 10: 9400995431
ISBN 13: 9789400995437
New
Taschenbuch
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Thin walled structures so extensively used nowadays in industry and civil engineering are usually loaded by very complex systems of forces acting on their edges or over their surfaces. In calculating the strength of a structure we replace real loads by certain idealized loads distinguishing between typical surface loads distributed over a great area of the structure and loads acting over a small area. The latter are called concentrated loads. When the area under the load is very small in comparison with the dimensions of the surface of the structure, for example, when the diameter of the loaded area is smaller than the wall thickness, the load can be considered as a single force or a mo ment acting on the structure at one point only. The real loads which are met in practice can always be replaced by a combination of components such as forces normal and tangential to the wall as well as bending and twisting moments. Knowing the distribution of the stresses in the structure produced by each component, we can find it under any arbitrary load using the principle of superposition. There are two main reasons for the appearance of the concentration of stresses in the structure. It can be produced by notches, rapid changes of the cross-section, holes, cutouts, etc. on one hand and by concentrated loads resulting from the interaction of the elements of the structure on the other. 588 pp. Englisch. Seller Inventory # 9789400995437
Seller Image
Local loads in plates and shells
Print on DemandSeller: moluna, Greven, Germany
Seller rating 4 out of 5 stars
Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Thin walled structures so extensively used nowadays in industry and civil engineering are usually loaded by very complex systems of forces acting on their edges or over their surfaces. In calculating the strength of a structure we replace real loads by cert. Seller Inventory # 5829827
Buy New
US$ 110.24
Shipping:
US$ 56.83
From Germany to U.S.A.
Quantity: Over 20 available
Seller Image
Local loads in plates and shells
Seller: preigu, Osnabrück, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. Local loads in plates and shells | S. Lukasiewicz | Taschenbuch | 588 S. | Englisch | 2011 | Springer | EAN 9789400995437 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu. Seller Inventory # 105625714
Seller Image
Local loads in plates and shells
Published by
Springer Netherlands, Springer Netherlands Dez 2011, 2011
ISBN 10: 9400995431
ISBN 13: 9789400995437
New
Taschenbuch
Seller: buchversandmimpf2000, Emtmannsberg, BAYE, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Thin walled structures so extensively used nowadays in industry and civil engineering are usually loaded by very complex systems of forces acting on their edges or over their surfaces. In calculating the strength of a structure we replace real loads by certain idealized loads distinguishing between typical surface loads distributed over a great area of the structure and loads acting over a small area. The latter are called concentrated loads. When the area under the load is very small in comparison with the dimensions of the surface of the structure, for example, when the diameter of the loaded area is smaller than the wall thickness, the load can be considered as a single force or a mo ment acting on the structure at one point only. The real loads which are met in practice can always be replaced by a combination of components such as forces normal and tangential to the wall as well as bending and twisting moments. Knowing the distribution of the stresses in the structure produced by each component, we can find it under any arbitrary load using the principle of superposition. There are two main reasons for the appearance of the concentration of stresses in the structure. It can be produced by notches, rapid changes of the cross-section, holes, cutouts, etc. on one hand and by concentrated loads resulting from the interaction of the elements of the structure on the other.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 588 pp. Englisch. Seller Inventory # 9789400995437
Stock Image
Local loads in plates and shells
Seller: Revaluation Books, Exeter, United Kingdom
Seller rating 5 out of 5 stars
Paperback. Condition: Brand New. 588 pages. 9.02x5.98x1.33 inches. In Stock. Seller Inventory # x-9400995431
Buy New
US$ 181.57
Shipping:
US$ 16.55
From United Kingdom to U.S.A.
Quantity: 2 available
Seller Image
Local loads in plates and shells
Published by
Springer Netherlands, Springer, 2011
ISBN 10: 9400995431
ISBN 13: 9789400995437
New
Taschenbuch
Seller: AHA-BUCH GmbH, Einbeck, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - Thin walled structures so extensively used nowadays in industry and civil engineering are usually loaded by very complex systems of forces acting on their edges or over their surfaces. In calculating the strength of a structure we replace real loads by certain idealized loads distinguishing between typical surface loads distributed over a great area of the structure and loads acting over a small area. The latter are called concentrated loads. When the area under the load is very small in comparison with the dimensions of the surface of the structure, for example, when the diameter of the loaded area is smaller than the wall thickness, the load can be considered as a single force or a mo ment acting on the structure at one point only. The real loads which are met in practice can always be replaced by a combination of components such as forces normal and tangential to the wall as well as bending and twisting moments. Knowing the distribution of the stresses in the structure produced by each component, we can find it under any arbitrary load using the principle of superposition. There are two main reasons for the appearance of the concentration of stresses in the structure. It can be produced by notches, rapid changes of the cross-section, holes, cutouts, etc. on one hand and by concentrated loads resulting from the interaction of the elements of the structure on the other. Seller Inventory # 9789400995437
Stock Image
Local loads in plates and shells (Mechanics of Surface Structure (4))
Seller: Mispah books, Redhill, SURRE, United Kingdom
Seller rating 4 out of 5 stars
Paperback. Condition: Like New. Like New. book. Seller Inventory # ERICA79794009954316
Buy Used
US$ 188.20
Shipping:
US$ 33.10
From United Kingdom to U.S.A.
Quantity: 1 available