Items related to Near-Net Shape Manufacturing of Miniature Spur Gears...
Near-Net Shape Manufacturing of Miniature Spur Gears by Wire Spark Erosion Machining (Materials Forming, Machining and Tribology) - Softcover
This work describes an experimental investigation with the aim to evaluate and establish wire spark erosion machining (WSEM) as a viable alternative for high quality miniature gear manufacturing. External spur type miniature brass (ASTM 858) gears with 12 teeth, 9.8 mm outside diameter and 5 mm face width were manufactured by WSEM. The research work was accomplished in four distinct experimental stages viz., preliminary, pilot, main and confirmation. The aim, scope and findings of each stage are progressively presented and discussed. In essence, the investigation found that it was possible to manufacture miniature gears to high quality by using WSEM. Gears up to DIN 5 quality with a good surface finish (1.2 µm average roughness) and satisfactory surface integrity were achieved. The results suggest that WSEM should be considered a viable alternative to conventional miniature gear manufacturing techniques and that in some instances it may even be superior. This work will prove useful to researchers and professionals in the field of miniature and micro-scale manufacturing and machining.
"synopsis" may belong to another edition of this title.
About the Author:
Kapil Gupta is a Postdoctoral Research Fellow in the Department of Mechanical Engineering Science at University of Johannesburg. He received his PhD in mechanical engineering with specialization in Manufacturing Engineering from Indian Institute of Technology Indore, India in 2014. Advanced machining processes, sustainable manufacturing, precision engineering and gear technology are his areas of interests. Dr Gupta has published five SCI Journal articles and delivered presentations at some prestigious international conferences. He also possesses five years of professional experience in the academic and research environment. He is an active member of American Society of Mechanical Engineers (ASME) and a reviewer for some international journals of repute.
Neelesh Kumar Jain is currently Professor of Mechanical Engineering and Dean Academic Affairs at Indian Institute of Technology Indore, India. He obtained his PhD in Mechanical Engineering from Indian Institute of Technology Kanpur, India in 2003. His areas of research interest include advanced and hybrid machining processes, and gear technology. Dr Jain has successfully supervised several PhD scholars and graduate and undergraduate theses. Over one hundred journal and conference articles have been published under his authorship. He is also the head of Centre of Excellence (an international research lab) in Gear Engineering at IIT Indore. He is handling consultancy and project work in association with several corporations and also with the Government of India. He is also engaged in writing book chapters and books for some reputed international publishers.
"About this title" may belong to another edition of this title.
- PublisherSpringer
- Publication date2018
- ISBN 10 9811093873
- ISBN 13 9789811093876
- BindingPaperback
- Number of pages148
Buy New
Learn more about this copy
US$ 117.89
Shipping:
US$ 24.61
From Germany to U.S.A.
Top Search Results from the AbeBooks Marketplace
Seller Image
Near-Net Shape Manufacturing of Miniature Spur Gears by Wire Spark Erosion Machining
Published by
Springer Nature Singapore Jun 2018
(2018)
ISBN 10: 9811093873
ISBN 13: 9789811093876
New
Taschenbuch
Quantity: 2
Seller:
Rating
Book Description Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This work describes an experimental investigation with the aim to evaluate and establish wire spark erosion machining (WSEM) as a viable alternative for high quality miniature gear manufacturing. External spur type miniature brass (ASTM 858) gears with 12 teeth, 9.8 mm outside diameter and 5 mm face width were manufactured by WSEM. The research work was accomplished in four distinct experimental stages viz., preliminary, pilot, main and confirmation. The aim, scope and findings of each stage are progressively presented and discussed. In essence, the investigation found that it was possible to manufacture miniature gears to high quality by using WSEM. Gears up to DIN 5 quality with a good surface finish (1.2 µm average roughness) and satisfactory surface integrity were achieved. The results suggest that WSEM should be considered a viable alternative to conventional miniature gear manufacturing techniques and that in some instances it may even be superior. This work will prove useful to researchers and professionals in the field of miniature and micro-scale manufacturing and machining. 152 pp. Englisch. Seller Inventory # 9789811093876
Buy New
US$ 117.89
Convert currency
Seller Image
Near-Net Shape Manufacturing of Miniature Spur Gears by Wire Spark Erosion Machining
Published by
Springer Singapore
(2018)
ISBN 10: 9811093873
ISBN 13: 9789811093876
New
Softcover
Quantity: > 20
Seller:
Rating
Book Description Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Covers near about every aspect i.e. quality, cost and competitiveness of miniature gear manufacturing using the wire spark erosion methodPresents quality aspects of gears and WSEM effects with the help of sketchesProvides highly relevant inform. Seller Inventory # 458821667
Buy New
US$ 101.67
Convert currency
Seller Image
Near-Net Shape Manufacturing of Miniature Spur Gears by Wire Spark Erosion Machining
Published by
Springer Nature Singapore
(2018)
ISBN 10: 9811093873
ISBN 13: 9789811093876
New
Taschenbuch
Quantity: 1
Seller:
Rating
Book Description Taschenbuch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - This work describes an experimental investigation with the aim to evaluate and establish wire spark erosion machining (WSEM) as a viable alternative for high quality miniature gear manufacturing. External spur type miniature brass (ASTM 858) gears with 12 teeth, 9.8 mm outside diameter and 5 mm face width were manufactured by WSEM. The research work was accomplished in four distinct experimental stages viz., preliminary, pilot, main and confirmation. The aim, scope and findings of each stage are progressively presented and discussed. In essence, the investigation found that it was possible to manufacture miniature gears to high quality by using WSEM. Gears up to DIN 5 quality with a good surface finish (1.2 µm average roughness) and satisfactory surface integrity were achieved. The results suggest that WSEM should be considered a viable alternative to conventional miniature gear manufacturing techniques and that in some instances it may even be superior. This work will prove useful toresearchers and professionals in the field of miniature and micro-scale manufacturing and machining. Seller Inventory # 9789811093876
Buy New
US$ 120.57
Convert currency
Stock Image
Near-Net Shape Manufacturing of Miniature Spur Gears by Wire Spark Erosion Machining (Materials Forming, Machining and Tribology)
Seller:
Rating
Book Description Paperback. Condition: New. New. book. Seller Inventory # ERICA80098110938736
Buy New
US$ 169.84
Convert currency
Stock Image
Near-Net Shape Manufacturing of Miniature Spur Gears by Wire Spark Erosion Machining (Materials Forming, Machining and Tribology)
Seller:
Rating
Book Description Paperback. Condition: Brand New. reprint edition. 135 pages. 9.25x6.10x0.35 inches. In Stock. Seller Inventory # zk9811093873
Buy New
US$ 194.56
Convert currency