Broekmans Maarten (47 results)

Soft cover. Condition: Very good. No jacket. The top corner edge of the back cover is slightly warped. Binding is tight and inside is clean and unmarked.

Paperback. Condition: Very Good. This book has light uneven fading to approx 1 inch of the front cover nearest the spine, a shifted spine, and minor rubbing and surface scratching to both covers, otherwise this book is in excellent condition with crisp, unmarked pages, a tight binding, and a clean, glossy cover.

Condition: New.

Paperback. Condition: New.

XXV, 823 p. Hardcover. Versand aus Deutschland / We dispatch from Germany via Air Mail. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. Sprache: Englisch.

Condition: As New. Unread book in perfect condition.

Condition: Good. Your purchase helps support Sri Lankan Children's Charity 'The Rainbow Centre'. Ex-library, so some stamps and wear, but in good overall condition. Our donations to The Rainbow Centre have helped provide an education and a safe haven to hundreds of children who live in appalling conditions.

Condition: New. In.

Paperback. Condition: New.

Condition: New.

Condition: As New. Unread book in perfect condition.

Hardcover. 364 S. Ehem. Bibliotheksexemplar mit Signatur und Stempel. GUTER Zustand, ein paar Gebrauchsspuren. Ex-library with stamp and library-signature. GOOD condition, some traces of use. w05593 9780939950881 Sprache: Englisch Gewicht in Gramm: 550.

Paperback. Condition: New.

Taschenbuch. Condition: Neu. Neuware - Volume 74 of Reviews in Mineralogy and Geochemistry contains a selection of papers on the applied mineralogy of cement and concrete, by far the most popular modern building material by volume, with an annual production exceeding 9 billion cubic meters, and steadily growing. Not even all 'concrete' topics can be covered by a single volume, but an interesting assortment was finally obtained. The seven chapters deal with mineralogy and chemistry of (alumina) clinker production and hydration (Pöllmann), alternative raw clinkering materials to reduce CO2 emission (Justnes), assessment of clinker constituents by optical and electron microscopy (Stutzman), industrial assessment of raw materials, cement and concrete using X-ray methods in different applications (Meier et al.), in situ investigation of clinker and cement hydration based on quantitative crystallographic phase analysis (Aranda et al.), characterization and properties of supplementary cementitious materials (SCMs) to improve cement and concrete properties (Snellings et al.), and deleterious alkali-aggregate reaction (AAR) in concrete (Broekmans).

Taschenbuch. Condition: Neu. Applied Mineralogy of Cement & Concrete | Herbert Pöllmann (u. a.) | Taschenbuch | X | Englisch | 2018 | Boston | EAN 9780939950881 | Verantwortliche Person für die EU: Walter de Gruyter GmbH, De Gruyter GmbH, Genthiner Str. 13, 10785 Berlin, productsafety[at]degruyterbrill[dot]com | Anbieter: preigu.

Condition: Sehr gut. Zustand: Sehr gut | Seiten: 852 | Sprache: Englisch | Produktart: Bücher | This book comprises 96 peer-reviewed contributions submitted to the 10th ICAM Congress, held in Trondheim, Norway on 01-05 August 2011. Themes covered include:1) Advanced materials, including high-performance technical ceramics and glasses,2) Analytical techniques, instrumentation and automation,3) Bio-mimetic mineral materials, medical mineralogy,4) Construction materials including cement/SCMs, concrete, bricks, tiles, screeds,5) Cultural heritage, stone artifacts and preservation,6) Environment and energy mineralogy, including CO2 sequestration,7) Geometallurgy and process mineralogy, and 8) Industrial minerals including gems, ore minerals, and mineral exploration.

Hardcover. Condition: new. Hardcover. This RILEM AAR 1.2 Atlas is complementary to the petrographic method described in RILEM AAR 1.1. It is designed and intended to assist in the identification of alkali-reactive rock types in concrete aggregate by thin-section petrography. Additional issues include: optical thin-section petrography conforming to RILEM AAR 1.1 is considered the prime assessment method for aggregate materials, being effective regarding cost and time. Unequivocal identification of minerals in very-fine grained rock types may however require use of supplementary methods. the atlas adheres to internationally adopted schemes for rock classification and nomenclature, as recommended in AAR 1.1. Thus, rock types are classified as igneous, sedimentary or metamorphic based upon mineral content, microstructure and texture/fabric. in addition, the atlas identifies known alkali-reactive silica types in each rock type presented. It also identifies consistent coincidence between certain lithologies and silica types; however, it refrains from attributing alkali-reactivity to a specific silica property or quality. operator skill and experience remain essential for reliable assessment by thin-section petrography. aggregate materials must be classified according to local criteria, based on regional experiences with ASR-damaged field structures and geology. Access to additional data may be relevant for the assessment of imported materials. mere application of rock nomenclature does not provide any sort of warranty to the development of deleterious alkali-reaction. Such may result in either rejection of a suitable aggregate material, thus wasting a valuable resource, or acceptance of an unsuitable material leading to concrete damage, both of which are undesirable. Thus, rock types are classified as igneous, sedimentary or metamorphic based upon mineral content, microstructure and texture/fabric. in addition, the atlas identifies known alkali-reactive silica types in each rock type presented. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Taschenbuch. Condition: Neu. Neuware -This RILEM AAR 1.2 Atlas is complementary to the petrographic method described in RILEM AAR 1.1. It is designed and intended to assist in the identification of alkali-reactive rock types in concrete aggregate by thin-section petrography. Additional issues include:ż optical thin-section petrography conforming to RILEM AAR 1.1 is considered the prime assessment method for aggregate materials, being effective regarding cost and time. Unequivocal identification of minerals in very-fine grained rock types may however require use of supplementary methods.ż the atlas adheres to internationally adopted schemes for rock classification and nomenclature, as recommended in AAR 1.1. Thus, rock types are classified as igneous, sedimentary or metamorphic based upon mineral content, microstructure and texture/fabric.ż in addition, the atlas identifies known alkali-reactive silica types in each rock type presented. It also identifies consistent coincidence between certain lithologies and silica types; however, it refrains from attributing alkali-reactivity to a specific silica property or quality.ż operator skill and experience remain essential for reliable assessment by thin-section petrography.ż aggregate materials must be classified according to local criteria, based on regional experiences with ASR-damaged field structures and geology. Access to additional data may be relevant for the assessment of imported materials.ż mere application of rock nomenclature does not provide any sort of warranty to the development of deleterious alkali-reaction. Such may result in either rejection of a suitable aggregate material, thus wasting a valuable resource, or acceptance of an unsuitable material leading to concrete damage, both of which are undesirable.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 208 pp. Englisch.

Buch. Condition: Neu. Neuware -This RILEM AAR 1.2 Atlas is complementary to the petrographic method described in RILEM AAR 1.1. It is designed and intended to assist in the identification of alkali-reactive rock types in concrete aggregate by thin-section petrography. Additional issues include:ż optical thin-section petrography conforming to RILEM AAR 1.1 is considered the prime assessment method for aggregate materials, being effective regarding cost and time. Unequivocal identification of minerals in very-fine grained rock types may however require use of supplementary methods.ż the atlas adheres to internationally adopted schemes for rock classification and nomenclature, as recommended in AAR 1.1. Thus, rock types are classified as igneous, sedimentary or metamorphic based upon mineral content, microstructure and texture/fabric.ż in addition, the atlas identifies known alkali-reactive silica types in each rock type presented. It also identifies consistent coincidence between certain lithologies and silica types; however, it refrains from attributing alkali-reactivity to a specific silica property or quality.ż operator skill and experience remain essential for reliable assessment by thin-section petrography.ż aggregate materials must be classified according to local criteria, based on regional experiences with ASR-damaged field structures and geology. Access to additional data may be relevant for the assessment of imported materials.ż mere application of rock nomenclature does not provide any sort of warranty to the development of deleterious alkali-reaction. Such may result in either rejection of a suitable aggregate material, thus wasting a valuable resource, or acceptance of an unsuitable material leading to concrete damage, both of which are undesirable.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 208 pp. Englisch.

Taschenbuch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - This RILEM AAR 1.2 Atlas is complementary to the petrographic method described in RILEM AAR 1.1. It is designed and intended to assist in the identification of alkali-reactive rock types in concrete aggregate by thin-section petrography. Additional issues include:- optical thin-section petrography conforming to RILEM AAR 1.1 is considered the prime assessment method for aggregate materials, being effective regarding cost and time. Unequivocal identification of minerals in very-fine grained rock types may however require use of supplementary methods.- the atlas adheres to internationally adopted schemes for rock classification and nomenclature, as recommended in AAR 1.1. Thus, rock types are classified as igneous, sedimentary or metamorphic based upon mineral content, microstructure and texture/fabric.- in addition, the atlas identifies known alkali-reactive silica types in each rock type presented. It also identifies consistent coincidence between certain lithologies and silica types; however, it refrains from attributing alkali-reactivity to a specific silica property or quality.- operator skill and experience remain essential for reliable assessment by thin-section petrography.- aggregate materials must be classified according to local criteria, based on regional experiences with ASR-damaged field structures and geology. Access to additional data may be relevant for the assessment of imported materials.- mere application of rock nomenclature does not provide any sort of warranty to the development of deleterious alkali-reaction. Such may result in either rejection of a suitable aggregate material, thus wasting a valuable resource, or acceptance of an unsuitable material leading to concrete damage, both of which are undesirable.

Buch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - This RILEM AAR 1.2 Atlas is complementary to the petrographic method described in RILEM AAR 1.1. It is designed and intended to assist in the identification of alkali-reactive rock types in concrete aggregate by thin-section petrography. Additional issues include:- optical thin-section petrography conforming to RILEM AAR 1.1 is considered the prime assessment method for aggregate materials, being effective regarding cost and time. Unequivocal identification of minerals in very-fine grained rock types may however require use of supplementary methods.- the atlas adheres to internationally adopted schemes for rock classification and nomenclature, as recommended in AAR 1.1. Thus, rock types are classified as igneous, sedimentary or metamorphic based upon mineral content, microstructure and texture/fabric.- in addition, the atlas identifies known alkali-reactive silica types in each rock type presented. It also identifies consistent coincidence between certain lithologies and silica types; however, it refrains from attributing alkali-reactivity to a specific silica property or quality.- operator skill and experience remain essential for reliable assessment by thin-section petrography.- aggregate materials must be classified according to local criteria, based on regional experiences with ASR-damaged field structures and geology. Access to additional data may be relevant for the assessment of imported materials.- mere application of rock nomenclature does not provide any sort of warranty to the development of deleterious alkali-reaction. Such may result in either rejection of a suitable aggregate material, thus wasting a valuable resource, or acceptance of an unsuitable material leading to concrete damage, both of which are undesirable.

Hardcover. Condition: Brand New. 193 pages. 11.00x8.50x0.50 inches. In Stock.

Paperback. Condition: New. NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Condition: New.

Condition: New.

Taschenbuch. Condition: Neu. Proceedings of the 10th International Congress for Applied Mineralogy (ICAM) | Maarten A.T.M. Broekmans | Taschenbuch | xxv | Englisch | 2016 | Springer | EAN 9783662521649 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Buch. Condition: Neu. Neuware -This book comprises 96 peer-reviewed contributions submitted to the 10th ICAM Congress, held in Trondheim, Norway on 01-05 August 2011. Themes covered include:1) Advanced materials, including high-performance technical ceramics and glasses2) Analytical techniques, instrumentation and automation3) Bio-mimetic mineral materials, medical mineralogy4) Construction materials including cement/SCMs, concrete, bricks, tiles, screeds5) Cultural heritage, stone artifacts and preservation6) Environment and energy mineralogy, including CO2 sequestration7) Geometallurgy and process mineralogy, and 8) Industrial minerals including gems, ore minerals, and mineral exploration.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 852 pp. Englisch.

Buch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book comprises 96 peer-reviewed contributions submitted to the 10th ICAM Congress, held in Trondheim, Norway on 01-05 August 2011. Themes covered include:1) Advanced materials, including high-performance technical ceramics and glasses,2) Analytical techniques, instrumentation and automation,3) Bio-mimetic mineral materials, medical mineralogy,4) Construction materials including cement/SCMs, concrete, bricks, tiles, screeds,5) Cultural heritage, stone artifacts and preservation,6) Environment and energy mineralogy, including CO2 sequestration,7) Geometallurgy and process mineralogy, and 8) Industrial minerals including gems, ore minerals, and mineral exploration.

Taschenbuch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book comprises 96 peer-reviewed contributions submitted to the 10th ICAM Congress, held in Trondheim, Norway on 01-05 August 2011. Themes covered include:1) Advanced materials, including high-performance technical ceramics and glasses,2) Analytical techniques, instrumentation and automation,3) Bio-mimetic mineral materials, medical mineralogy,4) Construction materials including cement/SCMs, concrete, bricks, tiles, screeds,5) Cultural heritage, stone artifacts and preservation,6) Environment and energy mineralogy, including CO2 sequestration,7) Geometallurgy and process mineralogy, and 8) Industrial minerals including gems, ore minerals, and mineral exploration.

PAP. Condition: New. New Book. Shipped from UK. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000.