Daoust Hubert (10 results)
- Softcover
Seller: Ria Christie Collections, Uxbridge, United KingdomRia Christie Collections
Contact seller5-star sellerCondition: New
US$ 70.47
US$ 16.14 shippingShips from United Kingdom to U.S.A.Quantity: Over 20 available
Condition: New. In.
- Hardcover
Seller: Ria Christie Collections, Uxbridge, United KingdomRia Christie Collections
Contact seller5-star sellerCondition: New
US$ 108.85
US$ 16.14 shippingShips from United Kingdom to U.S.A.Quantity: Over 20 available
Condition: New. In English.
- Softcover
Seller: AHA-BUCH GmbH, Einbeck, GermanyAHA-BUCH GmbH
Contact seller5-star sellerCondition: New
US$ 69.50
US$ 71.93 shippingShips from Germany to U.S.A.Quantity: 1 available
Taschenbuch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book deals with the most important substances used as additives in the plastics industry to improve the properties of polymer-based materials. Each chapter deals with a particular type of additive based on the type's definition, structure, and… classification according to main effects on polymeric materials. The mechanism of the additive efficiency and its effects on basic properties of specific polymers are discussed and a survey of its important qualities and practical applications is given. Each chapter is introduced by a theoretical analysis of the practical and technological importance of the ad ditive. The book is mainly intended for students in technical colleges, polytechnics and universities who are studying plastics technology and macromolecular chemistry as part of their general curriculum and for technologists in industry engaged in development, sales, technical service and production functions, and applications of plastics. An elementary knowledge of chemistry, physical chemistry and polymer science at the technical college level is assumed. Prague and Montreal, December 1982 J. Stepek, H. Daoust Table of Contents Introduction .
- Hardcover
Seller: moluna, Greven, Germanymoluna
Contact seller5-star sellerCondition: New
US$ 124.34
US$ 56.62 shippingShips from Germany to U.S.A.Quantity: Over 20 available
Gebunden. Condition: New.
- Hardcover
Seller: AHA-BUCH GmbH, Einbeck, GermanyAHA-BUCH GmbH
Contact seller5-star sellerCondition: New
US$ 153.62
US$ 72.86 shippingShips from Germany to U.S.A.Quantity: 2 available
Buch. Condition: Neu. Neuware - I. Additives Which Modify Physical Properties.- 1 Plasticizers.- 1.1 Thermodynamic Basis of Macromolecular Mixtures.- 1.1.1 Solubility of Polymers in Solvents.- 1.1.2 Flory-Huggins Interaction Parameter.- 1.1.3 Solubility Parameter.- 1.1.4 Phase Separation Phenomena.- 1.2 Reversible Gelation.- 1.3… Theory of Plasticization.- 1.3.1 Effect of Plasticizers on Thermal Mechanical Deformation of Rigid Polymeric Chains.- 1.3.2 Effect of Plasticizers on Tb and Tg Values.- 1.3.3 The Free Volume in Amorphous Polymers.- 1.3.4 Primary and Secondary Plasticizers.- 1.4. Classification of Plasticizers.- 1.4.1 Polar Aromatic and Polar Aliphatic Plasticizers.- 1.4.2 Characteristics of Plasticizers According to Their Chemical Structure.- 1.5. Plasticizer Anomalies and Antiplasticization.- 1.6. Loss of Plasticizers.- References.- 2 Lubricants and Mold-Release Agents.- 2.1 Lubricants.- 2.1.1 Principles of Their Action.- 2.1.2 Classification of PVC Lubricants According to Their Specific Action.- 2.1.3 Classification of PVC Lubricants According to Their Chemical Structure.- 2.1.4 Lubricants for Polyolefins.- 2.1.5 Basic Properties Necessary for Lubricants.- 2.2 Mold-Release Agents.- 2.2.1 Principles of Action.- 2.2.2 Some Examples of Mold-Release Agents.- References.- 3 Macromolecular Modifiers.- 3.1 Introduction.- 3.2 Homogenization of Polymer-Polymer Systems.- 3.3 Two-Phase Microheterogeneous Polymer-Polymer Systems.- 3.3.1 Effect of Glassy Polymer Matrix Phase on Impact Strength.- 3.3.2 Effect of Rubbery Phase Dispersed in Glassy Matrix on Impact Strength.- 3.3.3 Theory on Toughness of Microheterogeneous Two-Phase Polymer-Polymer Blends.- 3.4 Impact Modifiers for Glassy Polymers.- 3.4.1 Chlorinated Polyethylene (CPE).- 3.4.2 Ethylene-(Vinyl Acetate) Copolymers (EVA).- 3.4.3 Acrylic and Methacrylic Elastomers and MBS and ABS Terpolymers.- 3.4.4 Rubbers.- 3.5 Macromolecular Modifiers Used as Polymer Processing Aids.- References.- 4 Reinforcing Fillers, Reinforcing Agents, and Coupling Agents.- 4.1 Fillers.- 4.1.1 General Characteristics of Fillers and Composites.- 4.1.2 Fillers for Thermosetting Resins.- 4.1.3 Fillers for Plastomers.- 4.1.3.1 Polymer Reinforcement Factors.- 4.1.3.2 Classification of Fillers for Plastomers According to Their Reinforcement Activity.- 4.2 Reinforcing Agents for Laminates.- 4.2.1 Effect of Fillers or Reinforcing Agents on Basic Physical Properties of Composites.- 4.3 The Different Types of Fillers and Reinforcing Agents.- 4.3.1 Glass Fillers and Reinforcing Agents.- 4.3.1.1 Glass Fibers.- 4.3.1.2 Glass Microspheres.- 4.3.1.3 Glass Flakes.- 4.3.2 Fillers and Reinforcing Agents Made of Other Materials.- 4.3.2.1 Fibrous and Flaky Fillers and Fibrous Reinforcing Agents.- 4.3.2.2 Whiskers, Microfibers, and Powdered Fillers.- 4.3.3 Effect of Content and Size of Fillers on Composite Properties.- 4.4 Coupling Agents.- 4.4.1 Silane Coupling Agents.- 4.4.1.1 Action Mechanism.- 4.4.2 Organotitanate Coupling Agents.- 4.4.2.1 Action Mechanism.- 4.4.3 Other Types of Coupling Agents.- 4.4.4 Application Modes for Coupling Agents.- 4.4.5 Recommendations on the Use of Fillers and Filling Methods.- References.- 5 Colorants and Brightening Agents.- 5.1 Colorants.- 5.1.1 Inorganic Pigments.- 5.1.2 Organic Pigments.- 5.1.3 Criteria for Selection of Pigments.- 5.2 Brightening Agents.- 5.3 Methods Used for the Coloration of Plastics.- 5.3.1 Some Examples of Methods Used for the Coloration of Most Important Plastics.- References.- 6 Chemical and Physical Blowing Agents.- 6.1 Chemical Blowing Agents.- 6.1.1 Inorganic Agents.- 6.1.2 Organic Agents.- 6.1.2.1 Characteristics.- 6.1.3 Factors Acting on Blowing.- 6.2 Physical Blowing Agents.- References.- 7 Antistatic Agents.- 7.1 Introduction.- 7.2 Efficiency and Mechanism of Antistatic Agent Action.- 7.3 The Use of Antistatic Agents.- 7.3.1 Antistatic Agents Containing Nitrogen.- 7.3.2 Antistatic Agents Containing Phosphorus.- 7.3.3 Antistatic Agents Containing Sulfur.- 7.3.4 Betaine-Type Antist.
Language: English
Published by New York ; Heidelberg ; Berlin : Springer, 1983
- Hardcover
Seller: Roland Antiquariat UG haftungsbeschränkt, Weinheim, GermanyRoland Antiquariat UG haftungsbeschränkt
Contact seller5-star sellerCondition: Used
US$ 297.60
US$ 48.54 shippingShips from Germany to U.S.A.Quantity: 1 available
Hardcover. XI, 243 S. : 54 graph. Darst. ; 25 cm Good condition. Reading pages are clean and without marks. Retired library exemplar, with the usual marking. Book shows slight signs of storage and usage. Spine lightly edged. No dust jacket. Still good copy. 9783540907534 Sprache: Englisch Gewicht in Gramm: 675.
Language: English
Published by New York ; Heidelberg ; Berlin : Springer, 1983
- Hardcover
Seller: BUCHSERVICE / ANTIQUARIAT Lars Lutzer, Wahlstedt, GermanyBUCHSERVICE / ANTIQUARIAT Lars Lutzer
Contact seller5-star sellerCondition: Used - Very good
US$ 833.16
US$ 46.17 shippingShips from Germany to U.S.A.Quantity: 1 available
Condition: gut. 1983. Additives for plastics / J. ¦t?pek ; H. Daoust / Polymers ; 5 In deutscher Sprache. pages.
- Softcover
- Print on Demand
Seller: Basi6 International, Irving, TX, U.S.A.Basi6 International
Contact seller5-star sellerCondition: New
US$ 68.36
Free ShippingShips within U.S.A.Quantity: 10 available
Condition: Brand New. New. US edition. Print on demand title. Delivery takes 20-25 days. Excellent Customer Service.
- Hardcover
- Print on Demand
Seller: Basi6 International, Irving, TX, U.S.A.Basi6 International
Contact seller5-star sellerCondition: New
US$ 94.03
Free ShippingShips within U.S.A.Quantity: Over 20 available
Condition: Brand New. New. Delivery takes 20-25 days. Print on Demand.
- Softcover
- Print on Demand
Seller: moluna, Greven, Germanymoluna
Contact seller5-star sellerCondition: New
US$ 57.58
US$ 56.62 shippingShips from Germany to U.S.A.Quantity: Over 20 available
Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt.  This book deals with the most important substances used as additives in the plastics industry to improve the properties of polymer-based materials. Each chapter deals with a particular type of additive based on t…he type s definition, structure, an.
