G Surace (24 results)

Condition: New. In.

Condition: New. In.

Buch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - Contained in the volume are the papers presented at an International Symposium on Advanced Technology for Design and Fabrication of Composite Materials and Structures. The Symposium was organized by Consorzio per la Ricerca e l'Educazione Permanente; Institute of Fracture and Solid Mechanics, Lehigh University, Pennsylvania USA; Dipartimento di Ingegneria Strutturale del Politecnico di Torino; and Dipartimento di Ingegneria Aeronautica e Spaziale del Politecnico di Torino. It was held at the Politecnico di Torino in Italy, May 24-28, 1993. The support from the various organizations is acknowledged as follows: Consiglio N azionale delle Ricerche ALENIA SP AZIO AGUST A CIRA AERMACCHI Centro Ricerche FIAT ALENIA (formerly AERITALIA) Collegio Costruttori Edili della Provincia di Torino As new knowledge is being accumulated on the design and fabrication of advanced composite systems in different sectors of the world, there is the need not only to exchange new ideas but also to disseminate the information from the researchers to the users. The theme of this Symposium is particularly relevant to the automobile, marine, aerospace and construction industry where the competitive edge lies on improved processing and/or manufacturing of the products. Technological advances have been and will continue to depend strongly on the development of new materials and their effective use in design. Empirical trial-and error methods could no longer be considered economically feasible when applied to usage-specific materials such as composites.…

Taschenbuch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - Contained in the volume are the papers presented at an International Symposium on Advanced Technology for Design and Fabrication of Composite Materials and Structures. The Symposium was organized by Consorzio per la Ricerca e l'Educazione Permanente; Institute of Fracture and Solid Mechanics, Lehigh University, Pennsylvania USA; Dipartimento di Ingegneria Strutturale del Politecnico di Torino; and Dipartimento di Ingegneria Aeronautica e Spaziale del Politecnico di Torino. It was held at the Politecnico di Torino in Italy, May 24-28, 1993. The support from the various organizations is acknowledged as follows: Consiglio N azionale delle Ricerche ALENIA SP AZIO AGUST A CIRA AERMACCHI Centro Ricerche FIAT ALENIA (formerly AERITALIA) Collegio Costruttori Edili della Provincia di Torino As new knowledge is being accumulated on the design and fabrication of advanced composite systems in different sectors of the world, there is the need not only to exchange new ideas but also to disseminate the information from the researchers to the users. The theme of this Symposium is particularly relevant to the automobile, marine, aerospace and construction industry where the competitive edge lies on improved processing and/or manufacturing of the products. Technological advances have been and will continue to depend strongly on the development of new materials and their effective use in design. Empirical trial-and error methods could no longer be considered economically feasible when applied to usage-specific materials such as composites.…

Condition: New. pp. 460.

Condition: New. pp. 460.

Condition: New. Starting with technologies concerned with assessing the change in material microstructure in terms of the processing parameters, this work offers methodologies to account for tradeoffs between the fundamental variables such as temperature and pressure that control the product quality. Editor(s): Sih, George C.; Carpinteri, A.; Surace, G. (Dipt. di Ingegneria Aeronautica e Spaziale). Series: Engineering Applications of Fracture Mechanics. Num Pages: 438 pages, biography. BIC Classification: TGM; TRP. Category: (P) Professional & Vocational; (UP) Postgraduate, Research & Scholarly. Dimension: 234 x 156 x 25. Weight in Grams: 818. . 1995. Hardback. . . . .…

Condition: Gut. Zustand: Gut | Seiten: 460 | Sprache: Englisch | Produktart: Bücher | Contained in the volume are the papers presented at an International Symposium on Advanced Technology for Design and Fabrication of Composite Materials and Structures. The Symposium was organized by Consorzio per la Ricerca e l'Educazione Permanente; Institute of Fracture and Solid Mechanics, Lehigh University, Pennsylvania USA; Dipartimento di Ingegneria Strutturale del Politecnico di Torino; and Dipartimento di Ingegneria Aeronautica e Spaziale del Politecnico di Torino. It was held at the Politecnico di Torino in Italy, May 24-28, 1993. The support from the various organizations is acknowledged as follows: ¿ Consiglio N azionale delle Ricerche ¿ ALENIA SP AZIO ¿ AGUST A ¿ CIRA ¿ AERMACCHI ¿ Centro Ricerche FIAT ¿ ALENIA (formerly AERITALIA) ¿ Collegio Costruttori Edili della Provincia di Torino As new knowledge is being accumulated on the design and fabrication of advanced composite systems in different sectors of the world, there is the need not only to exchange new ideas but also to disseminate the information from the researchers to the users. The theme of this Symposium is particularly relevant to the automobile, marine, aerospace and construction industry where the competitive edge lies on improved processing and/or manufacturing of the products. Technological advances have been and will continue to depend strongly on the development of new materials and their effective use in design. Empirical trial-and­ error methods could no longer be considered economically feasible when applied to usage-specific materials such as composites.…

Paperback. Condition: Brand New. 460 pages. 9.00x6.30x1.04 inches. In Stock.

Condition: New. Starting with technologies concerned with assessing the change in material microstructure in terms of the processing parameters, this work offers methodologies to account for tradeoffs between the fundamental variables such as temperature and pressure that control the product quality. Editor(s): Sih, George C.; Carpinteri, A.; Surace, G. (Dipt. di Ingegneria Aeronautica e Spaziale). Series: Engineering Applications of Fracture Mechanics. Num Pages: 438 pages, biography. BIC Classification: TGM; TRP. Category: (P) Professional & Vocational; (UP) Postgraduate, Research & Scholarly. Dimension: 234 x 156 x 25. Weight in Grams: 818. . 1995. Hardback. . . . . Books ship from the US and Ireland.…

Paperback. Condition: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Hardcover. Condition: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

In 4º (28x21 cm) 264 pp., numerose illustrazioni e fotografie d'epoca. Legatura cartoncino editoriale. Come nuovo. All books are in stock in fine condition or described meticulously. Very safe packaging ***Books dated over 70 years old: ONLY SHIPPING WITHIN ITALY - please do not order if locaded abroad***.…

Condition: new. Questo è un articolo print on demand.

Buch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Contained in the volume are the papers presented at an International Symposium on Advanced Technology for Design and Fabrication of Composite Materials and Structures. The Symposium was organized by Consorzio per la Ricerca e l'Educazione Permanente; Institute of Fracture and Solid Mechanics, Lehigh University, Pennsylvania USA; Dipartimento di Ingegneria Strutturale del Politecnico di Torino; and Dipartimento di Ingegneria Aeronautica e Spaziale del Politecnico di Torino. It was held at the Politecnico di Torino in Italy, May 24-28, 1993. The support from the various organizations is acknowledged as follows: Consiglio N azionale delle Ricerche ALENIA SP AZIO AGUST A CIRA AERMACCHI Centro Ricerche FIAT ALENIA (formerly AERITALIA) Collegio Costruttori Edili della Provincia di Torino As new knowledge is being accumulated on the design and fabrication of advanced composite systems in different sectors of the world, there is the need not only to exchange new ideas but also to disseminate the information from the researchers to the users. The theme of this Symposium is particularly relevant to the automobile, marine, aerospace and construction industry where the competitive edge lies on improved processing and/or manufacturing of the products. Technological advances have been and will continue to depend strongly on the development of new materials and their effective use in design. Empirical trial-and error methods could no longer be considered economically feasible when applied to usage-specific materials such as composites. 460 pp. Englisch.…

Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Foreword. Session I: Curing, Bonding and Modelling.Towards decision making in knowledge-based systems for composite cure G.C. Sih. Adhesive bonding in construction technology R.N. Swamy. Nonlinear fracture mechanics models for fibre reinforced materia. …

Gebunden. Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Foreword. Session I: Curing, Bonding and Modelling.Towards decision making in knowledge-based systems for composite cure G.C. Sih. Adhesive bonding in construction technology R.N. Swamy. Nonlinear fracture mechanics models for fibre reinforced materia.…

Condition: New. Print on Demand pp. 460 52:B&W 6.14 x 9.21in or 234 x 156mm (Royal 8vo) Case Laminate on White w/Gloss Lam.

Buch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Contained in the volume are the papers presented at an International Symposium on Advanced Technology for Design and Fabrication of Composite Materials and Structures. The Symposium was organized by Consorzio per la Ricerca e l'Educazione Permanente; Institute of Fracture and Solid Mechanics, Lehigh University, Pennsylvania USA; Dipartimento di Ingegneria Strutturale del Politecnico di Torino; and Dipartimento di Ingegneria Aeronautica e Spaziale del Politecnico di Torino. It was held at the Politecnico di Torino in Italy, May 24-28, 1993. The support from the various organizations is acknowledged as follows: ¿ Consiglio N azionale delle Ricerche ¿ ALENIA SP AZIO ¿ AGUST A ¿ CIRA ¿ AERMACCHI ¿ Centro Ricerche FIAT ¿ ALENIA (formerly AERITALIA) ¿ Collegio Costruttori Edili della Provincia di Torino As new knowledge is being accumulated on the design and fabrication of advanced composite systems in different sectors of the world, there is the need not only to exchange new ideas but also to disseminate the information from the researchers to the users. The theme of this Symposium is particularly relevant to the automobile, marine, aerospace and construction industry where the competitive edge lies on improved processing and/or manufacturing of the products. Technological advances have been and will continue to depend strongly on the development of new materials and their effective use in design. Empirical trial-and error methods could no longer be considered economically feasible when applied to usage-specific materials such as composites.Springer-Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 460 pp. Englisch.…

Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Contained in the volume are the papers presented at an International Symposium on Advanced Technology for Design and Fabrication of Composite Materials and Structures. The Symposium was organized by Consorzio per la Ricerca e l'Educazione Permanente; Institute of Fracture and Solid Mechanics, Lehigh University, Pennsylvania USA; Dipartimento di Ingegneria Strutturale del Politecnico di Torino; and Dipartimento di Ingegneria Aeronautica e Spaziale del Politecnico di Torino. It was held at the Politecnico di Torino in Italy, May 24-28, 1993. The support from the various organizations is acknowledged as follows: ¿ Consiglio N azionale delle Ricerche ¿ ALENIA SP AZIO ¿ AGUST A ¿ CIRA ¿ AERMACCHI ¿ Centro Ricerche FIAT ¿ ALENIA (formerly AERITALIA) ¿ Collegio Costruttori Edili della Provincia di Torino As new knowledge is being accumulated on the design and fabrication of advanced composite systems in different sectors of the world, there is the need not only to exchange new ideas but also to disseminate the information from the researchers to the users. The theme of this Symposium is particularly relevant to the automobile, marine, aerospace and construction industry where the competitive edge lies on improved processing and/or manufacturing of the products. Technological advances have been and will continue to depend strongly on the development of new materials and their effective use in design. Empirical trial-and error methods could no longer be considered economically feasible when applied to usage-specific materials such as composites.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 464 pp. Englisch.…

Condition: New. Print on Demand pp. 460 49:B&W 6.14 x 9.21 in or 234 x 156 mm (Royal 8vo) Perfect Bound on White w/Gloss Lam.

Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Contained in the volume are the papers presented at an International Symposium on Advanced Technology for Design and Fabrication of Composite Materials and Structures. The Symposium was organized by Consorzio per la Ricerca e l'Educazione Permanente; Institute of Fracture and Solid Mechanics, Lehigh University, Pennsylvania USA; Dipartimento di Ingegneria Strutturale del Politecnico di Torino; and Dipartimento di Ingegneria Aeronautica e Spaziale del Politecnico di Torino. It was held at the Politecnico di Torino in Italy, May 24-28, 1993. The support from the various organizations is acknowledged as follows: Consiglio N azionale delle Ricerche ALENIA SP AZIO AGUST A CIRA AERMACCHI Centro Ricerche FIAT ALENIA (formerly AERITALIA) Collegio Costruttori Edili della Provincia di Torino As new knowledge is being accumulated on the design and fabrication of advanced composite systems in different sectors of the world, there is the need not only to exchange new ideas but also to disseminate the information from the researchers to the users. The theme of this Symposium is particularly relevant to the automobile, marine, aerospace and construction industry where the competitive edge lies on improved processing and/or manufacturing of the products. Technological advances have been and will continue to depend strongly on the development of new materials and their effective use in design. Empirical trial-and error methods could no longer be considered economically feasible when applied to usage-specific materials such as composites. 464 pp. Englisch.…

Condition: New. PRINT ON DEMAND pp. 460.

Condition: New. PRINT ON DEMAND pp. 460.