Ingham Derek (41 results)

Condition: Brand New. New. US edition. Expediting shipping for all USA and Europe orders excluding PO Box. Excellent Customer Service.

Hardcover. Condition: Good. Connecting readers with great books since 1972! Used textbooks may not include companion materials such as access codes, etc. May have some wear or writing/highlighting. We ship orders daily and Customer Service is our top priority.

Good. UK stocked, available immediately. Hardcover, published by Springer in 1989. First edition. Very minor rubbing to the printed board covers, the front endpaper has been clipped. The text is unmarked throughout, a nice copy. Illustrated. Weight (unpacked) is 678 grams.

Condition: New. In English.

Condition: New.

Condition: New.

Condition: New. pp. 244.

Paperback. Condition: Brand New. 1st edition. 239 pages. 9.61x6.69x0.55 inches. In Stock.

Taschenbuch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - Particle samplers are widely used in workplaces in order to determine the concentration of airborne particles in the atmosphere. They generally operate by drawing air, with the aid of a pump, through one or more orifices in the sampler body and housed within the sampler is a filter through which the air is subsequently drawn. The airborne particles are collected on the filter and their concentration is determined. Various samplers have been designed for this purpose including 'static' samplers, which are located in a fixed position in a working environment and determine the dust concentration averaged over a prescribed period of time at that one point, and 'personal' samplers which are mounted on a working person near to the breathing zone. The ORB sampler, a static sampler designed by Ogden and Birkett (1978) to have approximately the same entry efficiency, for particles with aerodynamical diameter up to at least 25~m, as a human head equally exposed to all wind directions for wind speeds between 0 and 2. 75m1s, is shown in Fig. l. l and examples of personal samplers are shown in Fig. 1. 2a, b and c and represent a single 4mm hole sampler, a seven hole sampler and a 25mm open face filter holder respectively. These three samplers are some of the most commonly used personal samplers for sampling the total airborne concentrations of workplace dusts in Britain.…

Condition: New. In English.

Condition: As New. Unread book in perfect condition.

Paperback. Condition: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Condition: As New. Unread book in perfect condition.

Condition: New. In English.

Hardback. Condition: New. Research into thermal convection in porous media has substantially increased during recent years due to its numerous practical applications. These problems have attracted the attention of industrialists, engineers and scientists from many very diversified disciplines, such as applied mathematics, chemical, civil, environmental, mechanical and nuclear engineering, geothermal physics and food science. Thus, there is a wealth of information now available on convective processes in porous media and it is therefore appropriate and timely to undertake a new critical evaluation of this contemporary information. Transport Phenomena in Porous Media contains 17 chapters and represents the collective work of 27 of the world's leading experts, from 12 countries, in heat transfer in porous media. The recent intensive research in this area has substantially raised the expectations for numerous new practical applications and this makes the book a most timely addition to the existing literature. It includes recent major developments in both the fundamentals and applications, and provides valuable information to researchers dealing with practical problems in thermal convection in porous media. Each chapter of the book describes recent developments in the highly advanced analytical, numerical and experimental techniques which are currently being employed and discussions of possible future developments are provided. Such reviews not only result in the consolidation of the currently available information, but also facilitate the identification of new industrial applications and research topics which merit further work.…

Gebunden. Condition: New. Autor/Autorin: Derek B InghamDepartment of Applied Mathematics, Ingham Centre for Computational Fluid Dynamics, University of Leeds, Leeds, UKAutor/Autorin: I. PopUniversity of Cluj, Faculty of Mathematics, RomaniaResearch into .

Condition: Good. Used - Good. Your purchase helps support Sri Lankan Children's Charity 'The Rainbow Centre.' Ex-library, but has been well cared for. Our donations to The Rainbow Centre have helped provide an education and a safe haven to hundreds of children who live in appalling conditions.

Condition: New. Autor/Autorin: I. PopUniversity of Cluj, Faculty of Mathematics, RomaniaAutor/Autorin: Derek B InghamDepartment of Applied Mathematics, Ingham Centre for Computational Fluid Dynamics, University of Leeds, Leeds, UKTransport phenome.

Hardback. Condition: New. Research into thermal convection in porous media has substantially increased during recent years due to its numerous practical applications. These problems have attracted the attention of industrialists, engineers and scientists from many very diversified disciplines, such as applied mathematics, chemical, civil, environmental, mechanical and nuclear engineering, geothermal physics and food science. Thus, there is a wealth of information now available on convective processes in porous media and it is therefore appropriate and timely to undertake a new critical evaluation of this contemporary information. Transport Phenomena in Porous Media contains 17 chapters and represents the collective work of 27 of the world's leading experts, from 12 countries, in heat transfer in porous media. The recent intensive research in this area has substantially raised the expectations for numerous new practical applications and this makes the book a most timely addition to the existing literature. It includes recent major developments in both the fundamentals and applications, and provides valuable information to researchers dealing with practical problems in thermal convection in porous media. Each chapter of the book describes recent developments in the highly advanced analytical, numerical and experimental techniques which are currently being employed and discussions of possible future developments are provided. Such reviews not only result in the consolidation of the currently available information, but also facilitate the identification of new industrial applications and research topics which merit further work.…

Condition: New. In English.

Hardcover. Condition: Brand New. 438 pages. 9.75x6.75x0.75 inches. In Stock.

Hardback. Condition: New. Interest in studying the phenomena of convective heat and mass transfer between an ambient fluid and a body which is immersed in it stems both from fundamental considerations, such as the development of better insights into the nature of the underlying physical processes which take place, and from practical considerations, such as the fact that these idealised configurations serve as a launching pad formodelling the analogous transfer processes in more realistic physical systems. Such idealised geometries also provide a test ground for checking the validity of theoreticalanalyses. Consequently, an immense research effort has been expended in exploring and understanding the convective heat and mass transfer processes between a fluid and submerged objects of various shapes. Among several geometries which have received considerable attention are plates, circular and elliptical cylinders, and spheres, although much information is also available for some other bodies, such ascorrugated surfaces or bodies of relatively complicated shapes.The book is a unified progress report which captures the spirit of the work in progress in boundary-layer heat transfer research and also identifies potential difficulties and areas for further study. In addition, this work provides new material on convective heat and mass transfer, as well as a fresh look at basic methods in heat transfer. Extensive references are included in order to stimulate further studies of the problems considered. A state-of-the-art picture of boundary-layer heat transfer today is presented by listing and commenting also upon the most recent successful efforts and identifying the needs for further research.…

Gebunden. Condition: New. Autor/Autorin: I. PopUniversity of Cluj, Faculty of Mathematics, RomaniaAutor/Autorin: Derek B InghamDepartment of Applied Mathematics, Ingham Centre for Computational Fluid Dynamics, University of Leeds, Leeds, UKInterest in study.

Condition: New.

Condition: New.

Condition: New. In English.

Condition: New. In English.

Hardback. Condition: New. Interest in studying the phenomena of convective heat and mass transfer between an ambient fluid and a body which is immersed in it stems both from fundamental considerations, such as the development of better insights into the nature of the underlying physical processes which take place, and from practical considerations, such as the fact that these idealised configurations serve as a launching pad formodelling the analogous transfer processes in more realistic physical systems. Such idealised geometries also provide a test ground for checking the validity of theoreticalanalyses. Consequently, an immense research effort has been expended in exploring and understanding the convective heat and mass transfer processes between a fluid and submerged objects of various shapes. Among several geometries which have received considerable attention are plates, circular and elliptical cylinders, and spheres, although much information is also available for some other bodies, such ascorrugated surfaces or bodies of relatively complicated shapes.The book is a unified progress report which captures the spirit of the work in progress in boundary-layer heat transfer research and also identifies potential difficulties and areas for further study. In addition, this work provides new material on convective heat and mass transfer, as well as a fresh look at basic methods in heat transfer. Extensive references are included in order to stimulate further studies of the problems considered. A state-of-the-art picture of boundary-layer heat transfer today is presented by listing and commenting also upon the most recent successful efforts and identifying the needs for further research.…

Paperback. Condition: New. Heat and fluid flow in fluid-saturated porous media has become increas­ ingly more attractive to researchers and thus it has become a very pro­ ductive field for many researchers and practical engineers in very diverse range of fields. The great interest in the topic stems from its widespread number of different practical applications in modern industries and in many environmental issues, such as nuclear waste management, build­ ing thermal insulators, geothermal power plants, grain storage, etc. In building sciences and thermal insulation engineering, an appreciable in­ sulating effect has been derived by placing porous material in the gap between the cavity walls and multishield structures of nuclear reactors between the pressure vessel and the reactor. Geophysical applications include modeling of the spread of pollutants (e. g. radioactive mater­ ial), water movements in geothermal reservoirs, enhanced recovery of petroleum reservoirs, etc. These, and many other, important practical applications have resulted in a rapid expansion of research in the general area of porous media and thus generated a vast amount of both theor­ etical and experimental research work. It has attracted the attention of industrialists, engineers and scientists from many varying disciplines, such as applied mathematics, chemical, civil, environmental, mechanical and nuclear engineering, geothermal physics, food science, medicine, etc. This book contains some of the contributions to the NATO Advanced Study Institute on Emerging Technologies and Techniques in Porous Media that was held in Neptun-Olimp, Constanta, Black Sea, Romania on 9-20 June, 2003. Softcover reprint of the original 1st ed. 2004.…

Paperback. Condition: New. Heat and fluid flow in fluid-saturated porous media has become increas­ ingly more attractive to researchers and thus it has become a very pro­ ductive field for many researchers and practical engineers in very diverse range of fields. The great interest in the topic stems from its widespread number of different practical applications in modern industries and in many environmental issues, such as nuclear waste management, build­ ing thermal insulators, geothermal power plants, grain storage, etc. In building sciences and thermal insulation engineering, an appreciable in­ sulating effect has been derived by placing porous material in the gap between the cavity walls and multishield structures of nuclear reactors between the pressure vessel and the reactor. Geophysical applications include modeling of the spread of pollutants (e. g. radioactive mater­ ial), water movements in geothermal reservoirs, enhanced recovery of petroleum reservoirs, etc. These, and many other, important practical applications have resulted in a rapid expansion of research in the general area of porous media and thus generated a vast amount of both theor­ etical and experimental research work. It has attracted the attention of industrialists, engineers and scientists from many varying disciplines, such as applied mathematics, chemical, civil, environmental, mechanical and nuclear engineering, geothermal physics, food science, medicine, etc. This book contains some of the contributions to the NATO Advanced Study Institute on Emerging Technologies and Techniques in Porous Media that was held in Neptun-Olimp, Constanta, Black Sea, Romania on 9-20 June, 2003. Softcover reprint of the original 1st ed. 2004.…