Kresta Jiri E (24 results)

Hardcover. Condition: VG+. Hardback in Very Good+ condition, Very Good+ dust jacket. 8vo 8" - 9" tall. 408 pages. * Quick Shipping * All Books Mailed in Boxes * Free Tracking Provided *.

Condition: New. In.

Condition: New. In.

PF. Condition: New.

Condition: New. pp. 316.

Condition: New. Satisfaction Guaranteed or your money back.

Taschenbuch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - The emergence of reaction injection molding (RIM) has been fol lowed by the industry with mounting interest. RIM technology has brought to polymer processing a new flexibility and savings in both energy and capital investment. The new developments and the number of engineers and scientists working in RIM is growing at so fast a rate that there is need for sharing information on progress in this area. This book is based on papers presented at the International Symposium on Reaction Injection Molding which was held in 1981 in Atlanta, Georgia, and was sponsored by the American Chemical Society, Division of Organic Coatings and Plastics Chemistry. The book is divided into four parts covering different areas of RIM development. The first part is devoted to the future trends of RIM develop ment in the United States and Japan. The structure-properties relationship and effects of annealing on properties of RIM elastomers are covered in the second part. New non-urethane polymers such as polyamides, polyisocyanurates and polystyrene suitable for RIM processing are discussed in the third part. In the last part the engineering and technological aspects of RIM, such as glass reinforcement, mixing, flow and moldability are covered in detail. Finally I would like to thank Mrs. Iris Glebe for typing this book and for help with editing, and K. Zielinski for his assistance v vi PREFACE in reviewing and, when necessary, correcting some of the papers. Thanks is also due to the editors of Plenum for their patience and helpfulness.…

Taschenbuch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - Ever since the beginning of the plastics and rubber industry, it was realized that useful products could be produced only if cer tain additives were incorporated into polymers. With the help of these additives, when physically dispersed in a polymer matrix, it has been possible to improve stability against thermal, oxidative, UV, hydrolytic and biological degradation, mechanical properties, flammability, cost, and processibility of plastics. The enormous growth of the volume of plastics consumed by modern society, and new application areas for plastics, have created a demand for new, better additives and better understanding of their functions in polymer systems. As a result of these trends there is a need for sharing of information on progress achieved in the area of polymer additives among engineers and scientists of the plastics industry and academia. This book is based on expanded and updated papers originally presented at the International Symposium on Polymer Additives, which was held in Las Vegas, Nevada, and was sponsored by the American Chemical Society, Division of Polymeric Materials Science and Engi neering. The book is divided into five parts which cover advances in various areas of polymer additives. The first part is devoted to the progress in understanding of UV degradation and stabilization of various polymers. Oxidation degradation and stabilization of plastic materials is covered in the second part. New developments in the stabilization of PVC are presented in the third part.…

Condition: New.

Condition: New.

Paperback. Condition: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Condition: good. A copy that has been read, remains in good condition. All pages are intact, and the cover is intact. The spine and cover show signs of wear. Pages can include notes and highlighting and show signs of wear, and the copy can include "From the library of" labels or previous owner inscriptions. 100% GUARANTEE! Shipped with delivery confirmation, if you're not satisfied with purchase please return item! Ships via media mail.…

Condition: Acceptable. Used - Acceptable. Dust cover damaged. Your purchase helps support Sri Lankan Children's Charity 'The Rainbow Centre'. Ex-library with wear and barcode page may have been removed. Our donations to The Rainbow Centre have helped provide an education and a safe haven to hundreds of children who live in appalling conditions.…

Condition: Acceptable. Used - Acceptable. . Your purchase helps support Sri Lankan Children's Charity 'The Rainbow Centre'. Ex-library with wear and barcode page may have been removed. Our donations to The Rainbow Centre have helped provide an education and a safe haven to hundreds of children who live in appalling conditions.…

Condition: new. Questo è un articolo print on demand.

Condition: new. Questo è un articolo print on demand.

Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The emergence of reaction injection molding (RIM) has been fol lowed by the industry with mounting interest. RIM technology has brought to polymer processing a new flexibility and savings in both energy and capital investment. The new developments and the number of engineers and scientists working in RIM is growing at so fast a rate that there is need for sharing information on progress in this area. This book is based on papers presented at the International Symposium on Reaction Injection Molding which was held in 1981 in Atlanta, Georgia, and was sponsored by the American Chemical Society, Division of Organic Coatings and Plastics Chemistry. The book is divided into four parts covering different areas of RIM development. The first part is devoted to the future trends of RIM develop ment in the United States and Japan. The structure-properties relationship and effects of annealing on properties of RIM elastomers are covered in the second part. New non-urethane polymers such as polyamides, polyisocyanurates and polystyrene suitable for RIM processing are discussed in the third part. In the last part the engineering and technological aspects of RIM, such as glass reinforcement, mixing, flow and moldability are covered in detail. Finally I would like to thank Mrs. Iris Glebe for typing this book and for help with editing, and K. Zielinski for his assistance v vi PREFACE in reviewing and, when necessary, correcting some of the papers. Thanks is also due to the editors of Plenum for their patience and helpfulness. 316 pp. Englisch.…

Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Ever since the beginning of the plastics and rubber industry, it was realized that useful products could be produced only if cer tain additives were incorporated into polymers. With the help of these additives, when physically dispersed in a polymer matrix, it has been possible to improve stability against thermal, oxidative, UV, hydrolytic and biological degradation, mechanical properties, flammability, cost, and processibility of plastics. The enormous growth of the volume of plastics consumed by modern society, and new application areas for plastics, have created a demand for new, better additives and better understanding of their functions in polymer systems. As a result of these trends there is a need for sharing of information on progress achieved in the area of polymer additives among engineers and scientists of the plastics industry and academia. This book is based on expanded and updated papers originally presented at the International Symposium on Polymer Additives, which was held in Las Vegas, Nevada, and was sponsored by the American Chemical Society, Division of Polymeric Materials Science and Engi neering. The book is divided into five parts which cover advances in various areas of polymer additives. The first part is devoted to the progress in understanding of UV degradation and stabilization of various polymers. Oxidation degradation and stabilization of plastic materials is covered in the second part. New developments in the stabilization of PVC are presented in the third part. 424 pp. Englisch.…

Condition: New. Print on Demand pp. 316 66:B&W 7 x 10 in or 254 x 178 mm Perfect Bound on White w/Gloss Lam.

Paperback / softback. Condition: New. This item is printed on demand. New copy - Usually dispatched within 5-9 working days.

Condition: New. PRINT ON DEMAND pp. 316.

Paperback / softback. Condition: New. This item is printed on demand. New copy - Usually dispatched within 5-9 working days.

Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -The emergence of reaction injection molding (RIM) has been fol lowed by the industry with mounting interest. RIM technology has brought to polymer processing a new flexibility and savings in both energy and capital investment. The new developments and the number of engineers and scientists working in RIM is growing at so fast a rate that there is need for sharing information on progress in this area. This book is based on papers presented at the International Symposium on Reaction Injection Molding which was held in 1981 in Atlanta, Georgia, and was sponsored by the American Chemical Society, Division of Organic Coatings and Plastics Chemistry. The book is divided into four parts covering different areas of RIM development. The first part is devoted to the future trends of RIM develop ment in the United States and Japan. The structure-properties relationship and effects of annealing on properties of RIM elastomers are covered in the second part. New non-urethane polymers such as polyamides, polyisocyanurates and polystyrene suitable for RIM processing are discussed in the third part. In the last part the engineering and technological aspects of RIM, such as glass reinforcement, mixing, flow and moldability are covered in detail. Finally I would like to thank Mrs. Iris Glebe for typing this book and for help with editing, and K. Zielinski for his assistance v vi PREFACE in reviewing and, when necessary, correcting some of the papers. Thanks is also due to the editors of Plenum for their patience and helpfulness.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 316 pp. Englisch.…

Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Ever since the beginning of the plastics and rubber industry, it was realized that useful products could be produced only if cer tain additives were incorporated into polymers. With the help of these additives, when physically dispersed in a polymer matrix, it has been possible to improve stability against thermal, oxidative, UV, hydrolytic and biological degradation, mechanical properties, flammability, cost, and processibility of plastics. The enormous growth of the volume of plastics consumed by modern society, and new application areas for plastics, have created a demand for new, better additives and better understanding of their functions in polymer systems. As a result of these trends there is a need for sharing of information on progress achieved in the area of polymer additives among engineers and scientists of the plastics industry and academia. This book is based on expanded and updated papers originally presented at the International Symposium on Polymer Additives, which was held in Las Vegas, Nevada, and was sponsored by the American Chemical Society, Division of Polymeric Materials Science and Engi neering. The book is divided into five parts which cover advances in various areas of polymer additives. The first part is devoted to the progress in understanding of UV degradation and stabilization of various polymers. Oxidation degradation and stabilization of plastic materials is covered in the second part. New developments in the stabilization of PVC are presented in the third part.Springer-Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 424 pp. Englisch.…