Kumar Mishra Rajeev (86 results)

Condition: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

Paperback. Condition: New. This book is an ideal reference text for teaching renewable energy to engineering and science students, as well as a reference book for scientists and professionals doing self study on the subject. The book has twelve chapters and starts with the definition and classification of renewable and non renewable energy and their status at global level. This chapter also contains the basic heat transfer mechanisms and laws of thermodynamics. It then deals with availability of solar radiation at different latitudes and energy and exergy analysis of flat plate collector, solar air collector, solar concentrator, evacuated tube collector, solar water heating system, solar distillation and solar cooker. The following chapter discusses the basics of semiconductor, its characteristics, working, characteristics of solar cell in dark and daylight situation, fundamentals of characteristic curves of semiconductor, fundamentals of PV module and array and some PVT systems. Detailed discussion on biomass, bio-fuels and biogas and their applications and the power produced by them, namely bio-power, is covered in the following chapters. Other renewable energy sources like hydropower, wind and geothermal are then covered as well as a chapter dealing with the working principle, basic theory and the capability to produce power from ocean thermal, tidal, wave and animal energy conversion systems. Subsequently, net CO2 mitigation, carbon credit, climate change and environmental impacts of all renewable energy resources are all covered followed by a discussion on the techno-economic feasibility of any energy sources as the backbone of its success and hence energy and economic analysis. The chapters deal the overall exergy of renewable energy sources by using the thermal and mechanical power and electrical energy as output. SI units are used throughout the book in solving various exercises in each chapter and conversion units of various physical and chemical parameters of metals and non-metals are also given in appendices.…

Paperback. Condition: New. This book is an ideal reference text for teaching renewable energy to engineering and science students, as well as a reference book for scientists and professionals doing self study on the subject. The book has twelve chapters and starts with the definition and classification of renewable and non renewable energy and their status at global level. This chapter also contains the basic heat transfer mechanisms and laws of thermodynamics. It then deals with availability of solar radiation at different latitudes and energy and exergy analysis of flat plate collector, solar air collector, solar concentrator, evacuated tube collector, solar water heating system, solar distillation and solar cooker. The following chapter discusses the basics of semiconductor, its characteristics, working, characteristics of solar cell in dark and daylight situation, fundamentals of characteristic curves of semiconductor, fundamentals of PV module and array and some PVT systems. Detailed discussion on biomass, bio-fuels and biogas and their applications and the power produced by them, namely bio-power, is covered in the following chapters. Other renewable energy sources like hydropower, wind and geothermal are then covered as well as a chapter dealing with the working principle, basic theory and the capability to produce power from ocean thermal, tidal, wave and animal energy conversion systems. Subsequently, net CO2 mitigation, carbon credit, climate change and environmental impacts of all renewable energy resources are all covered followed by a discussion on the techno-economic feasibility of any energy sources as the backbone of its success and hence energy and economic analysis. The chapters deal the overall exergy of renewable energy sources by using the thermal and mechanical power and electrical energy as output. SI units are used throughout the book in solving various exercises in each chapter and conversion units of various physical and chemical parameters of metals and non-metals are also given in appendices.…

Condition: New. In English.

Paperback. Condition: Brand New. 562 pages. 9.75x7.50x1.50 inches. In Stock.

Paperback. Condition: New. This book is an ideal reference text for teaching renewable energy to engineering and science students, as well as a reference book for scientists and professionals doing self study on the subject. The book has twelve chapters and starts with the definition and classification of renewable and non renewable energy and their status at global level. This chapter also contains the basic heat transfer mechanisms and laws of thermodynamics. It then deals with availability of solar radiation at different latitudes and energy and exergy analysis of flat plate collector, solar air collector, solar concentrator, evacuated tube collector, solar water heating system, solar distillation and solar cooker. The following chapter discusses the basics of semiconductor, its characteristics, working, characteristics of solar cell in dark and daylight situation, fundamentals of characteristic curves of semiconductor, fundamentals of PV module and array and some PVT systems. Detailed discussion on biomass, bio-fuels and biogas and their applications and the power produced by them, namely bio-power, is covered in the following chapters. Other renewable energy sources like hydropower, wind and geothermal are then covered as well as a chapter dealing with the working principle, basic theory and the capability to produce power from ocean thermal, tidal, wave and animal energy conversion systems. Subsequently, net CO2 mitigation, carbon credit, climate change and environmental impacts of all renewable energy resources are all covered followed by a discussion on the techno-economic feasibility of any energy sources as the backbone of its success and hence energy and economic analysis. The chapters deal the overall exergy of renewable energy sources by using the thermal and mechanical power and electrical energy as output. SI units are used throughout the book in solving various exercises in each chapter and conversion units of various physical and chemical parameters of metals and non-metals are also given in appendices.…

Condition: New. A unique book dealing with all types of renewable energy resources, aimed at scientists but also a textbook for science students&Uumlber den AutorrnrnProfessor Gopal Nath Tiwari is at the Centre for Energy Studies, Indian Institute of Techn.

Taschenbuch. Condition: Neu. Neuware - The sun provides solar energy which is clean and environmentally friendly and can be directly used to produce thermal as well as electrical power. It is also directly the main source of all renewable energy sources discussed in this book. Due to global industrialization and the sharp increase of CO2, there is an increasing need to develop less polluting renewable energy sources for our long term survival and to balance the ecological system. This book is a unique and complete book covering renewable energy resources and contains a detailed analysis of energy and exergy, CO2 mitigation, and CO2 credit of various renewable energy sources. It is an ideal reference for teaching renewable energy to engineering and science students, as well as a reference book for scientists and professionals doing self study on the subject.…

Paperback. Condition: New. This book is an ideal reference text for teaching renewable energy to engineering and science students, as well as a reference book for scientists and professionals doing self study on the subject. The book has twelve chapters and starts with the definition and classification of renewable and non renewable energy and their status at global level. This chapter also contains the basic heat transfer mechanisms and laws of thermodynamics. It then deals with availability of solar radiation at different latitudes and energy and exergy analysis of flat plate collector, solar air collector, solar concentrator, evacuated tube collector, solar water heating system, solar distillation and solar cooker. The following chapter discusses the basics of semiconductor, its characteristics, working, characteristics of solar cell in dark and daylight situation, fundamentals of characteristic curves of semiconductor, fundamentals of PV module and array and some PVT systems. Detailed discussion on biomass, bio-fuels and biogas and their applications and the power produced by them, namely bio-power, is covered in the following chapters. Other renewable energy sources like hydropower, wind and geothermal are then covered as well as a chapter dealing with the working principle, basic theory and the capability to produce power from ocean thermal, tidal, wave and animal energy conversion systems. Subsequently, net CO2 mitigation, carbon credit, climate change and environmental impacts of all renewable energy resources are all covered followed by a discussion on the techno-economic feasibility of any energy sources as the backbone of its success and hence energy and economic analysis. The chapters deal the overall exergy of renewable energy sources by using the thermal and mechanical power and electrical energy as output. SI units are used throughout the book in solving various exercises in each chapter and conversion units of various physical and chemical parameters of metals and non-metals are also given in appendices.…

Condition: New.

Condition: New. 2023rd edition NO-PA16APR2015-KAP.

Condition: As New. Unread book in perfect condition.

Condition: New.

Paperback. Condition: new. Paperback. This comprehensive book on Endocrine Surgery covers disorders of thyroid, parathyroid, adrenal glands along with neuroendocrine tumors of pancreas and gastrointestinal tract. It is a comprehensive, up-to-date treatise covering embryology, anatomy, etiology, clinical manifestations, diagnoses, and treatment modalities of surgical endocrine diseases. The authors explore the pertinent surgical endocrinology topics with a South Asian perspective. Color illustrations, flowcharts and tables make the topics lucid for professionals. This book provides the essential information surgeons require for evaluation and management of patients, both with straight forward, and complex endocrine problems. Key Features Focusses on concise yet comprehensive, up-to-date coverage of surgical endocrine diseases Discusses Robot Assisted Endocrine Surgery and explores its impact on healthcare finances Highlights the difference between practices used in western and resource limited countries by incorporating a South Asian perspective for region specific diseases. This book covers disorders of thyroid, parathyroid, adrenal glands along with neuroendocrine tumors of pancreas and gastrointestinal tract. Provides a comprehensive, up-to-date treatise covering embryology, anatomy, etiology, clinical manifestations, diagnoses and treatment modalities of surgical endocrine diseases. Shipping may be from multiple locations in the US or from the UK, depending on stock availability. …

Condition: New.

PAP. Condition: New. New Book. Shipped from UK. Established seller since 2000.

Condition: New.

Condition: new.

PAP. Condition: New. New Book. Shipped from UK. Established seller since 2000.

Condition: New. 1st edition NO-PA16APR2015-KAP.

Paperback. Condition: Brand New. 400 pages. 9.25x7.50x9.25 inches. In Stock.

Paperback. Condition: New.

Condition: New.

Condition: New. The book covers all aspects of thyroid and parathyroid surgery, including history and examination, pre-operative workup, and how ancillary specialties like pathology, radiology, radiotherapy, and nuclear medicine impact the outcome of thyroid and parath.

Condition: new.

Condition: As New. Unread book in perfect condition.

Condition: New. 2023rd edition NO-PA16APR2015-KAP.

Condition: New.

Condition: New.

Condition: New.